Filter interviews by
Fuselage station refers to a specific location on an aircraft's fuselage.
Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.
It is used as a reference point for various components and systems on the aircraft.
For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.
Fuselage station 0 is usually defined as the refere...
Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.
Butt line is not a medical term.
It could refer to the line where the buttocks meet the thighs.
It is not a commonly used term and may have different interpretations depending on the context.
Water line refers to the pipe or tubing that carries water from the main supply to a building or property.
Water line is an essential component of a plumbing system.
It can be made of various materials such as copper, PVC, or galvanized steel.
The size of the water line depends on the water demand of the building or property.
Water lines can be underground or above ground.
A water line break or leak can cause significant da
The question is unclear and seems to contain errors.
The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.
Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.
Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.
Witho...
A rivet is a metal fastener used to join two or more pieces of material together permanently.
Rivets are commonly used in construction, automotive, and aerospace industries.
They are inserted into pre-drilled holes and then deformed to hold the materials together.
Rivets can be made of various materials including aluminum, steel, and copper.
They are often used in place of screws or bolts when a permanent joint is required...
The number of cutting angles in a reamer varies depending on the type and size of the reamer.
The number of cutting angles can range from 2 to 6.
The cutting angles are designed to remove material from the workpiece as the reamer rotates.
The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.
The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.
Exam...
Drill bits can have various cutting angles depending on their purpose and material.
The most common cutting angle for general purpose drill bits is 118 degrees.
Drill bits for harder materials like metal may have a sharper angle of 135 degrees.
Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.
The cutting angle affects the efficiency and precision of the drilling process.
Drill bits are made by various manufacturers using different materials and designs.
Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.
Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.
The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.
The number of cutting files depends on the project requirements and design complexity.
The number of cutting files can range from a few to hundreds or even thousands.
It also depends on the type of cutting machine being used.
For example, a laser cutting machine may require different files than a CNC router.
The number of cutting files can also vary based on the material being cut and its thickness.
It is important to have ...
I am relocating for a new job opportunity that aligns with my career goals and offers better growth prospects.
New job opportunity with better growth prospects
Alignment with career goals
Seeking new challenges and experiences
posted on 2 Sep 2024
I applied via Job Fair and was interviewed in Aug 2024. There were 2 interview rounds.
Chemical analysis involves various techniques to identify and quantify the components of a substance.
Quantitative analysis - determining the amount of a particular substance in a sample
Qualitative analysis - identifying the components present in a sample
Instrumental analysis - using instruments like spectrophotometers, chromatographs, and mass spectrometers
Wet chemical analysis - traditional methods involving chemical ...
I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.
Tata Lockheed Martin Aerostructures interview questions for popular designations
I was interviewed in Aug 2024.
I applied via Recruitment Consulltant and was interviewed in Nov 2023. There were 2 interview rounds.
Yes, I have experience working as an Assembly Fitter in two different companies.
Worked as an Assembly Fitter at Company A for 3 years
Transitioned to Company B and continued as an Assembly Fitter for 2 years
Experienced in assembling various components and machinery
I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.
I applied via Company Website and was interviewed before Dec 2023. There was 1 interview round.
My professional goal is to become a certified System Engineer and work on complex projects that challenge me to continuously learn and grow.
Obtain certification as a System Engineer
Work on complex projects to enhance skills
Continuously learn and grow in the field
Seek opportunities for advancement and leadership roles
I have extensive experience with system engineering processes in various industries.
Led cross-functional teams to design and implement complex systems
Utilized tools such as requirements management software and system modeling tools
Performed system integration and testing to ensure functionality and performance
Collaborated with stakeholders to gather and analyze requirements
Implemented system engineering best practices
I applied via Referral and was interviewed before Jul 2023. There was 1 interview round.
This was a single round interview where the engineering manager and senior members of the team would ask me about my previous experiences and gauged my general ability to communicate and solve problems.
The rear gear axle is fitted by aligning it with the differential and securing it with bolts and nuts.
Align the rear gear axle with the differential
Secure the rear gear axle with bolts and nuts
Ensure proper torque specifications are followed
Check for any leaks or damage after installation
Hydraulic cylinder piston orings can be installed by following a few simple steps.
Clean the cylinder and piston thoroughly before installation.
Lubricate the orings with hydraulic fluid before installation.
Carefully slide the orings onto the piston, making sure they are properly seated.
Install the piston into the cylinder, taking care not to damage the orings.
Test the cylinder for leaks before putting it into service.
First and third angle positions are two different methods of representing a 3D object on a 2D plane.
First angle projection is commonly used in Europe and Asia, while third angle projection is commonly used in North America.
In first angle projection, the object is placed in front of the viewing plane and the planes of projection are between the object and the viewer.
In third angle projection, the object is placed behind...
Top trending discussions
based on 8 interviews
Interview experience
based on 151 reviews
Rating in categories
Executive
57
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate
51
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Executive
48
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
27
salaries
| ₹0 L/yr - ₹0 L/yr |
Manufacturing Engineer
26
salaries
| ₹0 L/yr - ₹0 L/yr |
Boeing
AIRBUS
Hindustan Aeronautics
Mahindra Aerospace