Upload Button Icon Add office photos
Premium Employer

i

This company page is being actively managed by Sterling & Wilson Team. If you also belong to the team, you can get access from here

Sterling & Wilson Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Sterling & Wilson Senior Design Engineer Interview Questions and Answers

Updated 30 Dec 2023

Sterling & Wilson Senior Design Engineer Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the difference between control module and relay module
  • Ans. 

    A control module is a device that manages and regulates the operation of a system, while a relay module is a device that controls the flow of electrical current.

    • Control modules are responsible for monitoring and adjusting various parameters in a system, such as temperature, pressure, or speed.

    • Relay modules act as switches that open or close circuits to control the flow of electrical current.

    • Control modules are typicall...

  • Answered by AI
  • Q2. What is system architecture of FAS,BMS systems
  • Ans. 

    The system architecture of FAS (Fire Alarm System) and BMS (Building Management System) involves the integration of various components and subsystems to ensure efficient monitoring and control of fire safety and building operations.

    • FAS system architecture typically includes fire detectors, control panels, notification devices, and communication interfaces.

    • BMS system architecture typically includes sensors, controllers,...

  • Answered by AI
  • Q3. How to calculate BOQ quantity for FAS system
  • Ans. 

    BOQ quantity for FAS system can be calculated by determining the required components and their quantities.

    • Identify the components needed for the FAS system

    • Determine the quantity of each component required based on project specifications

    • Consider factors such as system size, layout, and design requirements

    • Calculate the total quantity by summing up the quantities of all components

    • Example: If the FAS system requires 10 smo...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Sterling & Wilson Senior Design Engineer interview:
  • Fire Alarm System
  • Access Control System
  • Building Management System
  • Vesda
Interview preparation tips for other job seekers - Please check regarding salary date and time of salary as it a bad experience due to salary delay of most of the employees

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. OHSR BBS, HDPE & DI Pipes, Valve Fixing, Quantity Calculations, Sub Contractor Billing
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Related to cad and design

Interview Preparation Tips

Interview preparation tips for other job seekers - Need to be flexible in ur approach.
Round 1 - Technical 

(1 Question)

  • Q1. About the butterfly valve and simulation

Interview Preparation Tips

Interview preparation tips for other job seekers - English is a language, so ask the question in both the languages.
At the time of interview, if someone is not comfortable in English ask him/her to express in Hindi

I applied via Naukri.com and was interviewed in Dec 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Mostly asked complex and logical program

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn basic to advanced

I applied via Walk-in

Round 1 - Group Discussion 

About your job, location, CTC

Round 2 - HR 

(2 Questions)

  • Q1. Gdjjdnksnd shgxkdjx vhkdkxnx
  • Q2. Years of experience & expectex salary facility provided by company

Interview Preparation Tips

Interview preparation tips for other job seekers - Always ready for technical knowledge from your site
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
No response

I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is the construction procedure
  • Ans. 

    Construction procedure involves planning, designing, obtaining permits, site preparation, foundation construction, framing, finishing, and inspections.

    • Planning and designing the project

    • Obtaining necessary permits

    • Site preparation and excavation

    • Foundation construction

    • Framing and structural work

    • Installation of utilities and systems

    • Finishing touches such as painting and flooring

    • Final inspections and approvals

  • Answered by AI
  • Q2. What's is the beam lapping position
  • Ans. 

    Beam lapping position refers to the location where two beams overlap or intersect in a structural element.

    • Beam lapping position is important for ensuring structural integrity and load-bearing capacity.

    • Common beam lapping positions include end-to-end, side-by-side, and staggered lapping.

    • Proper beam lapping position is determined by engineering calculations and design specifications.

  • Answered by AI
  • Q3. What is the tile procedure
  • Ans. 

    The tile procedure is a method used in computer graphics to fill a region with a repeating pattern or image.

    • The tile procedure involves dividing the region into smaller tiles and filling each tile with the desired pattern or image.

    • It is commonly used in graphic design software to create seamless textures or backgrounds.

    • The size and shape of the tiles can be adjusted to achieve different visual effects.

    • Examples of tile ...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. What is the water treatment process
  • Ans. 

    Water treatment process involves several steps to remove impurities and make water safe for consumption.

    • Coagulation and flocculation to remove particles

    • Sedimentation to settle out solids

    • Filtration to remove remaining particles

    • Disinfection to kill bacteria and viruses

    • pH adjustment to control acidity or alkalinity

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are experienced, you should know about your CV and because whatever you mentioned in CV, that's all are topic for conservation and interview.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. About the previous projects & work procedures.
Round 2 - HR 

(1 Question)

  • Q1. Salary Discussion
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is the HDPE and Di pipe is code ??
  • Ans. 

    HDPE and Di pipe IS codes are standards set by the Bureau of Indian Standards for high-density polyethylene and ductile iron pipes.

    • IS 4984: High-density polyethylene (HDPE) pipes for potable water supplies

    • IS 8329: Ductile iron (DI) pipes and fittings for pressure pipelines

  • Answered by AI
  • Q2. Types of Aerator.
  • Ans. 

    Aerators are devices used to add air into water or other liquids to increase oxygen levels.

    • Surface aerators

    • Submersible aerators

    • Diffused aerators

    • Mechanical aerators

    • Aspirating aerators

  • Answered by AI
  • Q3. 3 Types of Aerator - 1) cascade 2) Tray tower 3) spray nozal

Interview Preparation Tips

Topics to prepare for Welspun Enterprises Senior Engineer interview:
  • Environmental Engineering
  • Building Construction
  • Water Treatment Plant
Interview preparation tips for other job seekers - Be confident and

Sterling & Wilson Interview FAQs

How many rounds are there in Sterling & Wilson Senior Design Engineer interview?
Sterling & Wilson interview process usually has 1 rounds. The most common rounds in the Sterling & Wilson interview process are Technical.
How to prepare for Sterling & Wilson Senior Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sterling & Wilson. The most common topics and skills that interviewers at Sterling & Wilson expect are Design Engineering, AutoCAD, AutoCAD Drawing, Bim and CAD.
What are the top questions asked in Sterling & Wilson Senior Design Engineer interview?

Some of the top questions asked at the Sterling & Wilson Senior Design Engineer interview -

  1. What is the difference between control module and relay mod...read more
  2. What is system architecture of FAS,BMS syst...read more
  3. How to calculate BOQ quantity for FAS sys...read more

Tell us how to improve this page.

Sterling & Wilson Senior Design Engineer Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more

Interview Questions from Similar Companies

Tractebel Interview Questions
4.1
 • 42 Interviews
Neilsoft Interview Questions
3.6
 • 41 Interviews
View all
Sterling & Wilson Senior Design Engineer Salary
based on 50 salaries
₹3.2 L/yr - ₹12 L/yr
21% less than the average Senior Design Engineer Salary in India
View more details

Sterling & Wilson Senior Design Engineer Reviews and Ratings

based on 10 reviews

3.2/5

Rating in categories

3.5

Skill development

3.0

Work-life balance

3.1

Salary

3.1

Job security

3.3

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 10 Reviews and Ratings
Senior Engineer
239 salaries
unlock blur

₹3.2 L/yr - ₹10 L/yr

Project Engineer
201 salaries
unlock blur

₹2.4 L/yr - ₹8.5 L/yr

Electrical Engineer
187 salaries
unlock blur

₹1.8 L/yr - ₹8.4 L/yr

Assistant Manager
185 salaries
unlock blur

₹4.2 L/yr - ₹15.5 L/yr

Deputy Manager
138 salaries
unlock blur

₹5 L/yr - ₹18 L/yr

Explore more salaries
Compare Sterling & Wilson with

Simplex Infrastructures

3.4
Compare

Aarvee Associates

3.9
Compare

Nasser S. Al Hajri Corporation

3.6
Compare

Ramky Infrastructure

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview