Filter interviews by
I applied via Campus Placement and was interviewed in Dec 2023. There was 1 interview round.
Grades of concrete refer to the strength of the concrete mix design.
Grades of concrete are denoted by M10, M15, M20, etc. where M stands for mix and the number represents the compressive strength in N/mm^2.
Higher grade concrete has higher compressive strength and is used for structural purposes.
Common grades include M25, M30, M35, and M40 for heavy-duty structures like bridges and high-rise buildings.
Slump in concrete refers to the measure of consistency of freshly mixed concrete.
Slump is determined by the amount of water in the concrete mix.
It is measured by filling a cone-shaped mold with concrete, then lifting the mold to see how much the concrete slumps.
Different types of slumps (true slump, shear slump, collapse slump) indicate different levels of workability and strength of the concrete mix.
Slump test is comm...
Water cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
Water cement ratio is a crucial factor in determining the strength and durability of concrete.
A lower water cement ratio results in stronger and more durable concrete.
The ideal water cement ratio varies depending on the type of concrete mix and its intended use.
For example, a water cement ratio of 0.5 is commonly used ...
M20 grade concrete is a mix of 1 part cement, 1.5 parts sand, and 3 parts aggregate, with a compressive strength of 20 MPa.
M20 grade concrete is commonly used in residential construction.
It is a mix of 1 part cement, 1.5 parts sand, and 3 parts aggregate.
The compressive strength of M20 grade concrete is 20 MPa.
It is suitable for foundations, beams, columns, and slabs.
I applied via Walk-in and was interviewed in Feb 2024. There were 2 interview rounds.
Cube filling rod is technically known as 'Tamping rod'.
Also known as tamping rod
Used to compact concrete in cube molds
Helps in removing air voids and ensuring uniform density
Typically made of steel or iron
Standard length is 16 inches with a diameter of 5/8 inch
BBS stands for Bar Bending Schedule.
BBS is a document that provides details of reinforcement cutting length, type, and size of bars used in construction.
It helps in estimating the quantity of steel required for construction.
BBS is essential for ensuring the structural integrity and strength of the building.
Example: BBS includes information on the number of bars, their diameter, spacing, and placement in beams, columns,
I appeared for an interview before Feb 2023.
Steel cutting length is the length of steel bars required for construction purposes.
Steel cutting length is calculated based on the dimensions of the structure and the required reinforcement.
It is important to consider the bending and overlapping requirements when determining the cutting length.
Steel cutting length can be calculated using formulas or software programs.
For example, for a beam with a length of 5 meters a...
What do you about Construction work what will you do and so many things about construction
I appeared for an interview in Feb 2023.
Self introduction, previous experience of working.
Shear force diagram shows the variation of shear force along the length of a beam, while bending moment diagram shows the variation of bending moment.
Shear force diagram is a graph of shear force plotted against the length of the beam.
Bending moment diagram is a graph of bending moment plotted against the length of the beam.
Shear force changes sign at point of applied load or reaction, while bending moment is zero at t...
Consumption of material as per IS code refers to the quantity of material required for construction as per Indian Standards.
Consumption of material is calculated based on the specifications provided in the relevant IS code for construction.
It includes factors such as type of material, dimensions, quality standards, and wastage allowances.
For example, IS 456 for concrete specifies the mix proportions of cement, sand, an...
Seeking new challenges and opportunities for growth.
Looking for a new challenge to further develop my skills and knowledge.
Interested in exploring new opportunities for career advancement.
Seeking a company with a better cultural fit or work-life balance.
Want to work on more innovative projects or in a different industry.
Previous company downsized or restructured, leading to job loss.
I built the company to a standard level by implementing best practices, fostering a culture of continuous improvement, and ensuring alignment with industry standards.
Implemented best practices in engineering processes and project management
Fostered a culture of continuous improvement through regular training and feedback sessions
Ensured alignment with industry standards and certifications such as ISO, ASME, or API
Regul...
I applied via Company Website and was interviewed in Aug 2021. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before Jun 2022. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before Jul 2023. There was 1 interview round.
posted on 12 Jun 2021
I applied via Walk-in and was interviewed before Jun 2020. There was 1 interview round.
The sampling frequency for private density test per square meter depends on the type of test being conducted.
The sampling frequency for a private density test per square meter varies depending on the type of test being conducted.
For example, a soil density test may require a sampling frequency of one sample per 100 square meters, while a concrete density test may require a sampling frequency of one sample per 10 square...
I applied via Campus Placement and was interviewed in Jun 2021. There were 5 interview rounds.
Concrete technology is the study of the properties and behavior of concrete, including its composition, production, and application.
Concrete is a composite material made up of cement, water, aggregates, and often other additives.
It is widely used in construction for its strength, durability, and versatility.
Concrete technology involves understanding the chemical reactions and physical properties of concrete.
It includes...
My favorite subject is computer science.
I enjoy studying algorithms and data structures.
I find programming languages fascinating and love exploring their features.
I am passionate about software development and enjoy solving complex problems.
I am interested in artificial intelligence and machine learning.
I enjoy learning about computer networks and cybersecurity.
based on 7 interviews
1 Interview rounds
based on 54 reviews
Rating in categories
Senior Engineer
505
salaries
| ₹2.8 L/yr - ₹6.5 L/yr |
Project Engineer
459
salaries
| ₹3.2 L/yr - ₹8 L/yr |
Assistant Manager
321
salaries
| ₹4 L/yr - ₹10.5 L/yr |
Deputy Manager
204
salaries
| ₹5 L/yr - ₹11 L/yr |
Senior Executive
197
salaries
| ₹2.5 L/yr - ₹6.5 L/yr |
Godrej Properties
DLF
Surya Roshni
Emaar India Limited