Filter interviews by
I applied via Walk-in and was interviewed in Nov 2024. There were 2 interview rounds.
I got selected in this round
Power factor is a measure of how effectively electrical power is being used in a circuit.
Power factor is the ratio of real power (kW) to apparent power (kVA) in a circuit.
It indicates how efficiently electrical power is being converted into useful work.
A power factor of 1 (or 100%) means all the power is being used effectively, while a power factor of 0 means none of the power is being used efficiently.
Power factor can...
A megger is used to measure the insulation resistance of electrical wires and equipment.
Used to detect insulation faults in wires and cables
Helps prevent electrical breakdowns and accidents
Can identify deteriorating insulation before it causes damage
Commonly used in electrical maintenance and testing
Example: A megger can be used to test the insulation resistance of a motor winding
I applied via Walk-in and was interviewed in Jul 2024. There were 3 interview rounds.
The Bernoulli theorem states that in a flowing fluid, an increase in the speed of the fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy.
States that in a flowing fluid, an increase in speed occurs simultaneously with a decrease in pressure or potential energy
Describes the relationship between fluid speed, pressure, and potential energy
Used in fluid dynamics to analyze
I appeared for an interview in May 2019.
Shear force and bending moment diagrams show the variation of forces and moments along a beam subjected to different loads.
Shear force diagram represents the variation of shear force along the length of the beam.
Bending moment diagram represents the variation of bending moment along the length of the beam.
Different loads such as point loads, distributed loads, and moments can be combined to create a composite load on t...
The density of steel is higher than that of concrete.
Steel has a density of around 7.8 g/cm³, while concrete typically has a density of 2.3 g/cm³.
The higher density of steel makes it stronger and more durable, but also heavier.
Concrete, on the other hand, is less dense but still provides good structural strength.
The density of steel and concrete can vary depending on the specific composition and additives used.
Fy in steel indicates the yield strength of the material.
Fy is a parameter used to measure the stress at which a material begins to deform plastically.
It represents the maximum stress a material can withstand before permanent deformation occurs.
Fy is typically expressed in units of force per unit area, such as pounds per square inch (psi) or megapascals (MPa).
Knowing the Fy of a steel is important for structural design...
Different grades of steel have varying yield stress. Learn about them here.
The most common grades of steel are A36, A572, and A992.
A36 steel has a yield strength of 36,000 psi.
A572 steel has a yield strength of 42,000-65,000 psi depending on the grade.
A992 steel has a yield strength of 50,000-65,000 psi depending on the grade.
Higher grades of steel generally have higher yield strengths.
Vibrators are used to generate vibrations for various purposes.
Vibrators are commonly used in construction to compact concrete and remove air bubbles.
They are also used in industrial applications to facilitate material flow in hoppers and chutes.
In the field of electronics, vibrators are used in devices like cell phones to provide haptic feedback.
Vibrators are used in sexual wellness products for stimulation and pleasu...
Sobha interview questions for designations
posted on 12 Jun 2021
I applied via Walk-in and was interviewed before Jun 2020. There was 1 interview round.
The sampling frequency for private density test per square meter depends on the type of test being conducted.
The sampling frequency for a private density test per square meter varies depending on the type of test being conducted.
For example, a soil density test may require a sampling frequency of one sample per 100 square meters, while a concrete density test may require a sampling frequency of one sample per 10 square...
I applied via Job Fair and was interviewed in Feb 2024. There was 1 interview round.
Dressing and personality
I applied via Campus Placement and was interviewed before Mar 2023. There was 1 interview round.
The structure work at the site involves the construction of a new building using steel beams and concrete columns.
Steel beams are being used for the framework of the building
Concrete columns are being installed to support the structure
The construction process includes pouring concrete, welding steel beams, and erecting walls
Managing site works involves overseeing construction activities, coordinating with contractors, ensuring safety regulations are followed, and meeting project deadlines.
Coordinate with contractors and subcontractors to ensure work is completed on time and within budget
Monitor progress of construction activities and address any issues that may arise
Ensure compliance with safety regulations and quality standards
Communicat...
I appeared for an interview in Feb 2023.
Self introduction, previous experience of working.
Shear force diagram shows the variation of shear force along the length of a beam, while bending moment diagram shows the variation of bending moment.
Shear force diagram is a graph of shear force plotted against the length of the beam.
Bending moment diagram is a graph of bending moment plotted against the length of the beam.
Shear force changes sign at point of applied load or reaction, while bending moment is zero at t...
Consumption of material as per IS code refers to the quantity of material required for construction as per Indian Standards.
Consumption of material is calculated based on the specifications provided in the relevant IS code for construction.
It includes factors such as type of material, dimensions, quality standards, and wastage allowances.
For example, IS 456 for concrete specifies the mix proportions of cement, sand, an...
Seeking new challenges and opportunities for growth.
Looking for a new challenge to further develop my skills and knowledge.
Interested in exploring new opportunities for career advancement.
Seeking a company with a better cultural fit or work-life balance.
Want to work on more innovative projects or in a different industry.
Previous company downsized or restructured, leading to job loss.
I built the company to a standard level by implementing best practices, fostering a culture of continuous improvement, and ensuring alignment with industry standards.
Implemented best practices in engineering processes and project management
Fostered a culture of continuous improvement through regular training and feedback sessions
Ensured alignment with industry standards and certifications such as ISO, ASME, or API
Regul...
I applied via Naukri.com and was interviewed before Jun 2022. There were 3 interview rounds.
based on 3 interviews
1 Interview rounds
based on 9 reviews
Rating in categories
Senior Engineer
505
salaries
| ₹2.8 L/yr - ₹6.5 L/yr |
Project Engineer
456
salaries
| ₹3.2 L/yr - ₹8 L/yr |
Assistant Manager
321
salaries
| ₹4 L/yr - ₹10.5 L/yr |
Deputy Manager
204
salaries
| ₹5 L/yr - ₹11 L/yr |
Senior Executive
198
salaries
| ₹2.5 L/yr - ₹6.5 L/yr |
Godrej Properties
DLF
Surya Roshni
Emaar India Limited