Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Shyam Steel Industries Team. If you also belong to the team, you can get access from here

Shyam Steel Industries Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Shyam Steel Industries Technical and Marketing Manager Interview Questions, Process, and Tips

Updated 23 Sep 2022

Shyam Steel Industries Technical and Marketing Manager Interview Experiences

1 interview found

I applied via Referral and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the Ductility ? => Ductility is a one type materials, can sustain plastic deformation long time before failure of the structure . this is a tensile strees acting of the structure.
  • Ans. 

    Ductility is the ability of a material to deform under tensile stress without breaking.

    • Ductility is a property of metals and alloys.

    • It is measured by the amount of deformation a material can undergo before it fractures.

    • Ductile materials are used in construction, such as steel and aluminum.

    • Ductility is important in manufacturing processes like forging and rolling.

    • It is the opposite of brittleness, which is the tendency

  • Answered by AI
  • Q2. What is the name of slum cone test Apparatus ? And size inverted slum ? => frustum cone. Bottom=200mm. Height=300mm , top =100mm
  • Ans. 

    The name of the slum cone test apparatus is frustum cone. The size of the inverted slum is bottom=200mm, height=300mm, top=100mm.

    • The frustum cone is used to determine the workability of concrete.

    • It is also known as the Abrams cone.

    • The inverted slum is measured by filling the cone with concrete and lifting it up to see how much the concrete slumps.

    • The frustum cone is commonly used in construction and civil engineering.

    • T...

  • Answered by AI
  • Q3. What is IST of aggregate ? => we know generally ist of opc cement is 30 min..and agregate ist mean..a batching plant mixing to placing away site traveling which time transit mixer vehicles. Generally cons...
  • Ans. 

    IST of aggregate is the time taken for the concrete mixture to set and harden.

    • IST stands for Initial Setting Time.

    • It is the time taken for the concrete mixture to set and harden.

    • The IST of aggregate is generally considered to be around 1 hour or 60 minutes.

    • IST of OPC cement is 30 minutes.

    • Transit mixer vehicles are used to transport the concrete mixture from the batching plant to the construction site.

  • Answered by AI
  • Q4. What is ingredients of shaym steel ? =>
  • Ans. 

    Shaym Steel is made of high-quality raw materials including iron ore, coal, and limestone.

    • Shaym Steel is made using the blast furnace process

    • The raw materials used in Shaym Steel include iron ore, coal, and limestone

    • The iron ore is melted in the furnace and impurities are removed to create steel

    • The coal is used as a fuel source to heat the furnace

    • The limestone is used as a flux to remove impurities from the steel

    • Shaym ...

  • Answered by AI
  • Q5. What is M20 ratio ? => cement: sand(f.a):agregate (ca) 1 part : 1.5 part : 3 part
  • Ans. 

    M20 ratio is a mix design ratio used for concrete construction, consisting of 1 part cement, 1.5 parts sand, and 3 parts aggregate.

    • M20 ratio is commonly used for moderate strength concrete construction.

    • The ratio is expressed in terms of volume, not weight.

    • The strength of the concrete depends on the quality of materials used and the water-cement ratio.

    • Other common mix design ratios include M15, M25, and M30.

    • M20 ratio is...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If your knowledge about your college or academic , thats enough 🙏

Interview questions from similar companies

I was interviewed in Oct 2016.

Interview Questionnaire 

6 Questions

  • Q1. Introduce yourself.
  • Ans. 

    Experienced retail professional with strong leadership skills and a passion for customer service.

    • Over 5 years of retail management experience

    • Proven track record of increasing sales and improving customer satisfaction

    • Strong leadership and team-building skills

    • Passionate about providing excellent customer service

    • Bachelor's degree in Business Administration

  • Answered by AI
  • Q2. How is alumina obtained from bauxite?
  • Ans. 

    Alumina is obtained from bauxite through the Bayer process.

    • Bauxite is crushed and mixed with sodium hydroxide to form a slurry.

    • The slurry is heated and pressurized in a digester to dissolve the alumina content.

    • The resulting solution is cooled and filtered to remove impurities.

    • The purified solution is then heated to precipitate the alumina as a white powder.

    • The alumina powder is washed, dried, and calcined to produce pu...

  • Answered by AI
  • Q3. Reaction for Al extraction from alumina.
  • Ans. 

    The reaction for Al extraction from alumina involves the reduction of alumina using carbon or electrolysis.

    • Alumina (Al2O3) is first converted into aluminum chloride (AlCl3) by reacting with hydrochloric acid.

    • The aluminum chloride is then reduced to aluminum metal by either carbon reduction or electrolysis.

    • In carbon reduction, carbon (usually in the form of coke) is heated with the aluminum chloride to produce aluminum ...

  • Answered by AI
  • Q4. Stainless steel production.
  • Q5. Types of cast iron.
  • Ans. 

    There are four main types of cast iron: gray iron, white iron, ductile iron, and malleable iron.

    • Gray iron is the most common type and has excellent castability and good machinability.

    • White iron is very hard and brittle, often used for wear-resistant applications.

    • Ductile iron has high strength and ductility, making it suitable for a wide range of applications.

    • Malleable iron is heat-treated to improve its strength and du

  • Answered by AI
  • Q6. Location constraints and little info about family.

Interview Preparation Tips

Round: Test
Experience: Basic Aptitude and Verbal Test - Easy Questions
Tips: Improve Speed and Accuracy
Duration: 30 minutes
Total Questions: 35

Round: Group Discussion
Experience: Two sects formed; one supporting the argument and other opposing it. Wage gap, Indian Mine Law, social pressure, patriarchal mentality and crime against women were discussed.
Tips: Communication skills are more important than content. Show confidence and speak fluently. Factual and grammatical errors can be ignored.
Duration: 15 minutes

Round: Technical + HR Interview
Experience: They were chilled out and were giving time to speak. Little hints were also being given.
Tips: Be thorough with basics and don't give nonsensical answers if you don't know.

Skills: Technical Knowledge(ML
College Name: NIT Raipur
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Apr 2023.

Round 1 - Group Discussion 

Debate on multiple topics

Round 2 - Technical 

(1 Question)

  • Q1. Questions related to Operation Research
Round 3 - Case Study 

Come out with a conclusion and solutions to a problem

Round 4 - HR 

(1 Question)

  • Q1. About previous experience, challenges and accolades.
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
No response

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Preffered Location
  • Q2. Salary expectation
Round 2 - Technical 

(3 Questions)

  • Q1. Sheet pile use in damp & flood area
  • Ans. 

    Sheet piles are commonly used in damp and flood-prone areas to provide structural support and prevent water infiltration.

    • Sheet piles are driven into the ground to create a barrier against water seepage.

    • They are often made of steel or vinyl and are interlocked to form a continuous wall.

    • Sheet piles can be used in cofferdams, seawalls, and flood protection systems.

    • They are effective in preventing soil erosion and protecti...

  • Answered by AI
  • Q2. Wind load calculation
  • Q3. Grade of concrete
  • Ans. 

    Grade of concrete refers to the strength of the concrete mix design.

    • Grade of concrete is denoted by the ratio of cement to sand to aggregate.

    • Common grades of concrete include M10, M15, M20, etc.

    • Higher grade concrete has higher strength and durability.

    • For example, M20 concrete has a compressive strength of 20 MPa.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Know about your previous work experience as per mention in cv

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Conveyor Grades, Hydraulic system it's grade tan value, nas value
  • Ans. How will you asset for this organisation
  • Answered Anonymously
Round 3 - Behavioral 

(1 Question)

  • Q1. What are your achievements, how can you be beneficial for the company.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear and specific about your job role and KPI, mention your achievements, and profits you can given.
Never lie, please be clear if you don't know
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Feb 2024.

Round 1 - HR 

(2 Questions)

  • Q1. Hello have yoyr resume
  • Q2. About your qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't join here you will regret a lot
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Mar 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

No. Of question were more.. Need to speed up calculations when attempting

Round 2 - Group Discussion 

Topic was easy which was common to all

Round 3 - Technical 

(5 Questions)

  • Q1. Also question were from IC Engine about petrol engine and diesel engine
  • Q2. Question were from RAC, thermo dynamics
  • Q3. Wet and dry bulb temperature asked
  • Q4. Limitations of laws of thermodynamic
  • Ans. 

    Limitations of laws of thermodynamics

    • The laws of thermodynamics are based on idealized systems and may not fully apply to real-world situations

    • They do not account for quantum effects at very small scales

    • The laws assume equilibrium conditions, which may not always be the case in practical scenarios

    • They do not consider the effects of external factors such as friction, air resistance, or electrical resistance

    • The laws do n...

  • Answered by AI
  • Q5. About centrifugal pumps

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to be precise with your answer. Don't try to elaborate too much if not asked by interviwer
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Are you comfortable relocating to offbeat/ remote locations ?
  • Q2. Tell me something about yourself ?
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Easy to easy but they will select u even if u don't write anything

Round 2 - One-on-one 

(2 Questions)

  • Q1. What is ur name
  • Ans. 

    My name is John Smith.

    • Full name is John Smith

    • Common name

    • Easy to remember

  • Answered by AI
  • Q2. Does u have pan card and aadhar card
  • Ans. 

    Yes, I have both a PAN card and an Aadhar card.

    • Yes, I have a PAN card which is used for financial transactions and tax purposes.

    • I also have an Aadhar card which is a unique identification number issued by the government of India.

    • Having both cards is essential for various official and financial transactions.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 🙏dekhlo

I applied via Naukri.com and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. 80% of questions from previous exoet related.
  • Q2. Industrial Safety and electrical Safety related questions.
  • Q3. Safety aspects and precautions of Plant and ports Safety.
  • Ans. 

    Safety aspects and precautions of plant and ports safety are crucial for preventing accidents and ensuring the well-being of employees.

    • Regular safety inspections and audits should be conducted to identify potential hazards and risks.

    • Proper training and education should be provided to employees on safety procedures and protocols.

    • Personal protective equipment (PPE) should be provided and worn by employees when necessary.

    • ...

  • Answered by AI
  • Q4. Previous jobs roles and responsibilities.
  • Q5. After Technical round qualified...we will get call from HR Team.

Interview Preparation Tips

Interview preparation tips for other job seekers - Great place to working here.i learnt so many things in day by Day.

Thanks to naukari Team.
Contribute & help others!
anonymous
You can choose to be anonymous

Shyam Steel Industries Interview FAQs

How many rounds are there in Shyam Steel Industries Technical and Marketing Manager interview?
Shyam Steel Industries interview process usually has 1 rounds. The most common rounds in the Shyam Steel Industries interview process are Technical.
What are the top questions asked in Shyam Steel Industries Technical and Marketing Manager interview?

Some of the top questions asked at the Shyam Steel Industries Technical and Marketing Manager interview -

  1. What is IST of aggregate ? => we know generally ist of opc cement is 30 min..a...read more
  2. What is the Ductility ? => Ductility is a one type materials, can sustain pl...read more
  3. What is the name of slum cone test Apparatus ? And size inverted slum ? => frus...read more

Recently Viewed

INTERVIEWS

Shyam Steel Industries

No Interviews

INTERVIEWS

Accentuate Technology

No Interviews

INTERVIEWS

Gujarat Ambuja Exports

No Interviews

INTERVIEWS

HSBC Software Development

No Interviews

INTERVIEWS

Shyam Steel Industries

No Interviews

INTERVIEWS

Shyam Steel Industries

No Interviews

CAMPUS PLACEMENT

SRM university (SRMU)

INTERVIEWS

Shyam Steel Industries

No Interviews

INTERVIEWS

Accentuate Technology

No Interviews

INTERVIEWS

HSBC Software Development

No Interviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 588 Interviews
Jindal Stainless Interview Questions
4.2
 • 205 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 98 Interviews
Viraj Profiles Interview Questions
3.8
 • 75 Interviews
View all

Fast track your campus placements

View all
Assistant Manager
82 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Officer
80 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive Accountant
79 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Sales Manager
53 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Marketing Executive
51 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Shyam Steel Industries with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview