Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Shyam Steel Industries Team. If you also belong to the team, you can get access from here

Shyam Steel Industries Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Shyam Steel Industries Assistant Engineer Mechanical Interview Questions and Answers

Updated 13 Feb 2024

Shyam Steel Industries Assistant Engineer Mechanical Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(1 Question)

  • Q1. Basic knowledge of industrial engineering and maintenance department.
Round 2 - HR 

(1 Question)

  • Q1. For Salary discussion

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Junior engineering mechanical JE
  • Ans. The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical/Electronics) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below: Paper-I (i) General Intelligence & Reasoning: The Syllabus for Gener...
  • Answered Anonymously
  • Q2. Assistant manager
  • Q3. Incharge assistant
  • Q4. Mechanical Engineering suparvisor

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical engineering supervisor
Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Diploma Mechanical engineering JE
  • Ans. 

    A Diploma in Mechanical Engineering can prepare students for a career as a Junior Engineer (JE) in the public or private sector:

  • Answered Anonymously
  • Q2. Diploma mechanical engineering supervisor
  • Ans. 

    A three-year course that provides students with the knowledge and skills to design, manufacture, install, and operate engines and machines. Students learn about forces and motion, and subjects include automobile engineering, manufacturing engineering, and power plant engineering.

  • Answered Anonymously
Round 2 - Technical 

(2 Questions)

  • Q1. Diploma mechanical engineering JE
  • Ans. 

    A Diploma in Mechanical Engineering can prepare students for a career as a Junior Engineer (JE) in the public or private sector:

  • Answered Anonymously
  • Q2. Diploma Mechanical engineering supervisor
Round 3 - Technical 

(2 Questions)

  • Q1. Assistant manager
  • Q2. Assistant incharge

Interview Preparation Tips

Interview preparation tips for other job seekers - Here are some tips for job seekers:
Set goals
Define your career goals, including your ideal role, industry, and long-term objectives.
Tailor your resume
For each job application, customize your resume to highlight relevant skills and experiences.
Learn new skills
Identify any skill gaps and take steps to improve them. Online courses, certifications, or workshops can help you stay competitive.
Understand your strengths
Understanding your professional strengths can help you sell yourself as the best candidate for the job.
Ask for informational interviews
Reaching out to companies for informational interviews can help you show your interest and learn more about their organization.
Be patient
The interview process can take longer than it used to, and it can take a while to hear back after an interview.
Use a resume summary
If you have a diverse or extensive work history, a resume summary can help employers see how your past experiences are relevant to the job.
Learn from others
Learn from the experiences of fellow job seekers who have successfully navigated the job market.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How to know if Hydraulic cylinder leakage
  • Ans. 

    Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.

    • Inspect the area around the hydraulic cylinder for oil puddles or stains

    • Monitor the performance of the hydraulic system for any decrease in efficiency

    • Listen for any abnormal noises coming from the hydraulic cylinder during operation

  • Answered by AI
  • Q2. What is NAS
  • Ans. 

    NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.

    • NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.

    • NAS devices can be accessed by multiple users and devices simultaneously over a network.

    • NAS devices often have their own operating system and can run various applications such...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well about your work
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 4 interview rounds.

Round 1 - Group Discussion 

Gearbox and fluid coupling replacement work and development

Round 2 - Assignment 

Senior manager and manager and all employees job description for growth and development

Round 3 - Case Study 

Cash study in machanical engineering decision making thermodynamics fluid machanics and heat transfer

Round 4 - HR 

(11 Questions)

  • Q1. Gear box replacement work safely first and all ppes sure and paper work and try out checking and saving and job work clean and fresh and tackup up and clamping conveyer belt old gear box replacement for ne...
  • Q2. Barring checking and replacement work and safety first and all ppes sure and paper work and try out sure and teckup up and clamping conveyer belt and plummer block top cover open Barring checking and remov...
  • Q3. Conveyer belt pmi roller checking work and safety first and all ppes sure and paper work and walked away clean and fresh and Roller cut marking frem number and belt tracking and belt close and try out sure...
  • Q4. Barring greasing work and safety first and all ppes sure and paper work and conveyer belt running and walked away clean and fresh and grease gun and greasing work
  • Q5. Conveyer belt panching work and safety first and all ppes sure and paper work and try out same position and solution and hardner bad mixed mad belt panching work
  • Q6. Conveyer belt chute replacement work and safety first and all ppes sure and paper work and try out and jobs walked away clean and fresh and same chute replace and tightening bolt and machine welding and fi...
  • Q7. Conveyer belt v-scraper replacement work and safety first and all ppes sure and paper work belt close and try out and walked away from clean and fresh and same v -scraper making and replacement work
  • Q8. Gear box old oil replacement work and safety first and all ppes sure and paper work and belt close and try out and walked away clean and fresh and oil gauge and checking and drain oil and Aw320 oil replac...
  • Q9. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out lockout and tagout (loto) safety procedure and fuse plug and open west oil remove and new aw46oil replacem...
  • Q10. Drive pmi work and safety first and all ppes sure and paper work and try out ofter walked away clean and fresh and bass bolt nut tightening work
  • Q11. Gear box cleaning work and safety first and all ppes sure and paper work and walked away clean and fresh and ty out sure and clean and fresh and same process paper work cancelled and conveyer belt running...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Process of production
  • Q2. Final production process

Interview Preparation Tips

Topics to prepare for JSW Group Mechanical Engineer interview:
  • Hot Forging
  • Technical Support
  • Testing Tools
  • Production Planning
  • ERP
Interview preparation tips for other job seekers - take interview one on one offline or online ,as per candidate experience u can select it.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(8 Questions)

  • Q1. What are type of crane used
  • Ans. 

    Various types of cranes are used in mechanical maintenance, including overhead cranes, gantry cranes, jib cranes, and mobile cranes.

    • Overhead cranes are commonly used in industrial settings for lifting and moving heavy loads.

    • Gantry cranes are used in shipyards and construction sites for lifting and moving large objects.

    • Jib cranes are often used in workshops and warehouses for precise lifting and positioning of materials...

  • Answered by AI
  • Q2. What are type of loading on bearing
  • Ans. 

    Types of loading on bearings include radial load, axial load, and moment load.

    • Radial load: Load acting perpendicular to the axis of rotation.

    • Axial load: Load acting parallel to the axis of rotation.

    • Moment load: Load causing bending or twisting of the bearing.

    • Combination loading: Bearings may experience a combination of radial, axial, and moment loads.

    • Examples: Radial load on a wheel bearing, axial load on a thrust bear

  • Answered by AI
  • Q3. What type of heat treatment to be done on tube mill shaft
  • Ans. 

    The tube mill shaft should undergo heat treatment to improve its strength and durability.

    • The most common heat treatment for tube mill shafts is quenching and tempering.

    • Quenching involves heating the shaft to a high temperature and then rapidly cooling it in water or oil to increase its hardness.

    • Tempering is done after quenching to reduce the brittleness caused by the rapid cooling process.

    • Other heat treatment methods l...

  • Answered by AI
  • Q4. What do you understand by Pickling process
  • Ans. 

    Pickling process is a metal surface treatment method to remove impurities and improve corrosion resistance.

    • Pickling is a chemical process used to remove impurities like stains, rust, and scale from metal surfaces.

    • It involves immersing the metal in an acidic solution, such as hydrochloric acid or sulfuric acid.

    • The process helps to improve the metal's corrosion resistance and prepare it for further treatments like painti...

  • Answered by AI
  • Q5. What happen in cold rolling mill process to structure of steel
  • Ans. 

    In cold rolling mill process, the structure of steel is altered through compression and deformation.

    • Cold rolling reduces the thickness of steel by compressing it between rollers

    • This process increases the strength and hardness of the steel

    • Grain structure of the steel becomes elongated and aligned in the direction of rolling

    • Cold rolling can also improve the surface finish and dimensional accuracy of the steel

    • Examples: Co...

  • Answered by AI
  • Q6. How Centrifugal pump work
  • Ans. 

    Centrifugal pumps work by converting mechanical energy from a motor into kinetic energy to move fluid through the pump.

    • Centrifugal force is created by the rotation of the pump impeller, which pushes the fluid towards the outer edges of the pump casing.

    • The kinetic energy of the fluid increases as it moves through the pump, creating pressure that forces the fluid out of the pump discharge.

    • Centrifugal pumps are commonly u...

  • Answered by AI
  • Q7. Tube mill roll materail and their root dia
  • Ans. 

    Tube mill rolls are typically made of high-quality alloy steel or tool steel, with varying root diameters depending on the specific application.

    • Tube mill rolls are commonly made of materials such as high-quality alloy steel or tool steel for durability and wear resistance.

    • The root diameter of tube mill rolls can vary depending on the specific requirements of the milling process.

    • Examples of tube mill roll materials incl...

  • Answered by AI
  • Q8. Gear box ratio and output power
  • Ans. 

    Gear box ratio determines the relationship between input and output speeds, while output power is the amount of work done per unit of time.

    • Gear box ratio is the ratio of the number of teeth on the input gear to the number of teeth on the output gear.

    • Output power is the product of the force applied and the distance over which the force is applied per unit of time.

    • For example, if a gear box has a ratio of 2:1 and the inp...

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is Hydraulic system and it's components?
  • Ans. 

    A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.

    • Hydraulic pump: generates flow to the hydraulic system

    • Hydraulic cylinder: converts fluid power into mechanical power

    • Hydraulic valve: controls the flow and pressure of the fluid

    • Hydraulic hose: carries the fluid between components

  • Answered by AI
  • Q2. Explain steel making process?
  • Ans. 

    Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.

    • Iron ore is mined and transported to a steel mill.

    • The iron ore is smelted in a blast furnace to remove impurities and create molten iron.

    • The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.

    • The refined molten iro...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Everything was good interview was quite impressive and perfect.
Interview experience
1
Bad
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(6 Questions)

  • Q1. Company Experiences
  • Q2. Hydraulic cylinder
  • Q3. Gearbox question
  • Q4. How many types valve
  • Ans. 

    There are several types of valves used in mechanical systems.

    • Gate valve

    • Ball valve

    • Butterfly valve

    • Globe valve

    • Check valve

    • Diaphragm valve

    • Plug valve

    • Needle valve

    • Pressure relief valve

    • Safety valve

  • Answered by AI
  • Q5. Work experience
  • Q6. Gearbox used oil
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Approached by Company and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(5 Questions)

  • Q1. Asked questions regarding family details,
  • Q2. How many family members are there in your family?
  • Ans. 

    There are four members in our family

  • Answered Anonymously
  • Q3. Are you a bachelor or married ?
  • Q4. What is your wife occupation?
  • Q5. How many kids do you have?
  • Ans. 

    I have two children Girl and a boy.

  • Answered Anonymously
Round 3 - Group Discussion 

Asked questions regarding job profile, job role and equipments and spares we maintain.

Interview Preparation Tips

Interview preparation tips for other job seekers - Hi please be prepare yourself to face an interview so that you will be able to answer to any question and don't mention any false subjects those which are not related to your job profile,
Now a days cracking an interview is not so much easy, There was a time where we can easily join a company in our experience basis, but now a days it's not like that,you must be able to face any kind of questions.

Shyam Steel Industries Interview FAQs

How many rounds are there in Shyam Steel Industries Assistant Engineer Mechanical interview?
Shyam Steel Industries interview process usually has 2 rounds. The most common rounds in the Shyam Steel Industries interview process are Technical and HR.

Tell us how to improve this page.

Shyam Steel Industries Assistant Engineer Mechanical Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 835 Interviews
JSW Steel Interview Questions
3.9
 • 580 Interviews
Jindal Stainless Interview Questions
4.2
 • 202 Interviews
JSW Group Interview Questions
3.9
 • 107 Interviews
Jindal Saw Interview Questions
4.0
 • 98 Interviews
Viraj Profiles Interview Questions
3.8
 • 73 Interviews
View all

Fast track your campus placements

View all
Shyam Steel Industries Assistant Engineer Mechanical Salary
based on 6 salaries
₹2.1 L/yr - ₹3.5 L/yr
31% less than the average Assistant Engineer Mechanical Salary in India
View more details

Shyam Steel Industries Assistant Engineer Mechanical Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
80 salaries
unlock blur

₹3 L/yr - ₹10 L/yr

Executive Accountant
79 salaries
unlock blur

₹1.5 L/yr - ₹5.4 L/yr

Sales Officer
77 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Marketing Executive
51 salaries
unlock blur

₹2 L/yr - ₹4.2 L/yr

Area Sales Manager
50 salaries
unlock blur

₹4.5 L/yr - ₹14 L/yr

Explore more salaries
Compare Shyam Steel Industries with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview