Add office photos
Employer?
Claim Account for FREE

Rudraksh Detergent & Chemical

3.1
based on 13 Reviews
Filter interviews by

PNB MetLife Interview Questions and Answers

Updated 5 Feb 2024

Q1. What is the minimum thickness of slab

Ans.

The minimum thickness of a slab depends on various factors such as the load it will bear and the type of material used.

  • The minimum thickness of a slab is typically determined by structural engineers based on the expected load it will bear.

  • For residential buildings, the minimum slab thickness is usually around 4 inches (10 cm).

  • For commercial or industrial buildings, the minimum slab thickness can range from 6 to 8 inches (15 to 20 cm) or more, depending on the load requirement...read more

View 1 answer

Q2. What is the minimum angle of staircase

Ans.

The minimum angle of a staircase depends on the building codes and regulations of the specific jurisdiction.

  • The minimum angle of a staircase is typically determined by building codes and regulations.

  • In general, a minimum angle of 30 degrees is often required for residential staircases.

  • For commercial or public buildings, the minimum angle may be higher, such as 35 or 40 degrees.

  • The purpose of specifying a minimum angle is to ensure the safety and ease of use for individuals us...read more

View 1 answer

Q3. What is the height of Crank bar

Ans.

The height of a crank bar varies depending on its specific application and design.

  • The height of a crank bar can be determined by referring to the engineering drawings or specifications of the particular project or equipment.

  • In general, the height of a crank bar is measured from the base to the highest point of the bar.

  • The height may also depend on the intended use of the crank bar, such as in machinery or construction.

  • For example, a crank bar used in a construction site may h...read more

View 1 answer

Q4. What is the minimum cover in footing

Ans.

The minimum cover in footing refers to the minimum depth of soil or concrete above the reinforcement in a foundation.

  • The minimum cover is determined based on factors such as the type of soil, load-bearing capacity, and environmental conditions.

  • It is important to provide sufficient cover to protect the reinforcement from corrosion and ensure the structural integrity of the footing.

  • The minimum cover requirements may vary for different types of footings, such as spread footings,...read more

View 1 answer
Discover PNB MetLife interview dos and don'ts from real experiences

Q5. What is the standard height of cilling

Ans.

The standard height of a ceiling varies depending on the type of building and its purpose.

  • The standard height for residential ceilings is typically around 8 to 9 feet.

  • Commercial buildings often have higher ceilings, ranging from 10 to 12 feet or more.

  • In industrial settings, ceilings can be even higher to accommodate large machinery or equipment.

  • Certain specialized buildings like theaters or auditoriums may have much higher ceilings to enhance acoustics and provide better visi...read more

View 1 answer

Q6. What is ratio of M20 concrete

Ans.

The ratio of M20 concrete is 1:1.5:3.

  • The ratio of M20 concrete refers to the proportion of cement, sand, and aggregate used in the mix.

  • For M20 concrete, the ratio is 1 part cement, 1.5 parts sand, and 3 parts aggregate.

  • This ratio is commonly used for general construction purposes.

View 1 answer

Q7. What is development length

Ans.

Development length is the minimum length of reinforcement required to transfer the stress between the steel and concrete.

  • Development length is determined based on the type of reinforcement and the bond strength between steel and concrete.

  • It is necessary to ensure that the reinforcement bars are properly embedded in the concrete to provide the required strength.

  • Development length is influenced by factors such as bar diameter, concrete strength, and the presence of any addition...read more

View 1 answer

Q8. What is the steel density

Ans.

The steel density is the measure of how much mass is contained in a given volume of steel.

  • Steel density is typically measured in kilograms per cubic meter (kg/m^3).

  • The density of steel can vary depending on the specific type and composition of the steel.

  • For example, the density of carbon steel is around 7850 kg/m^3.

  • Stainless steel, on the other hand, has a density of about 8000 kg/m^3.

  • The density of steel is an important factor in various engineering and construction applicat...read more

View 1 answer

Q9. Minimum bar in square Column

Ans.

The minimum bar in a square column refers to the minimum amount of reinforcement required for the column.

  • The minimum bar in a square column is determined by the size and design of the column.

  • It is typically specified in terms of the diameter and spacing of the reinforcement bars.

  • The purpose of the minimum bar is to provide adequate strength and stability to the column.

  • The minimum bar requirements may vary depending on the structural design codes and standards.

  • For example, a c...read more

View 1 answer
Contribute & help others!
Write a review
Share interview
Contribute salary
Add office photos
Interview Tips & Stories
Ace your next interview with expert advice and inspiring stories

Top Interview Questions from Similar Companies

3.4
 • 774 Interview Questions
4.2
 • 386 Interview Questions
4.0
 • 227 Interview Questions
4.0
 • 171 Interview Questions
3.9
 • 132 Interview Questions
View all
Top Rudraksh Detergent & Chemical Interview Questions And Answers
Share an Interview
Stay ahead in your career. Get AmbitionBox app
qr-code
Helping over 1 Crore job seekers every month in choosing their right fit company
70 Lakh+

Reviews

5 Lakh+

Interviews

4 Crore+

Salaries

1 Cr+

Users/Month

Contribute to help millions
Get AmbitionBox app

Made with ❤️ in India. Trademarks belong to their respective owners. All rights reserved © 2024 Info Edge (India) Ltd.

Follow us
  • Youtube
  • Instagram
  • LinkedIn
  • Facebook
  • Twitter