Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Royal Enfield Team. If you also belong to the team, you can get access from here

Royal Enfield Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Royal Enfield Quality Engineer Interview Questions and Answers

Updated 22 Oct 2024

Royal Enfield Quality Engineer Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. All are technical related QMS
  • Q2. Process relared question

I applied via Walk-in and was interviewed in Jan 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Skill assets

Interview Preparation Tips

Interview preparation tips for other job seekers - you some take soo try than better in company is of the must beauty work

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
asked in MM AUTO
Q4. what is IATF audit , cause of IATF , relationship between for IAT ... read more
Q5. What is the Physical & Chemical test of Steel Reinforcement?

Interview questions from similar companies

I applied via Referral

Interview Preparation Tips

Round: Resume Shortlist
Experience: its just a bit of luck needed for this round. the main thing is that your Resume has been viewed by them and then only you are shortlisted. unless until they got an eye on your resume, you can't be selected. Sometimes its a hard luck that your resume is not selected but by fellow readers, don't loose your heart, try try until you fly.
Tips: your resume should be to the point and try to finish it in just 2 pages. Just show the juices in you, not the hard-work work behind them. Its not the right place. "Brag" as much as you can but but ..... I am stressing on But, brag about that only about which you know completely. always remember that, Judges behavior always depends on your resume. Their Questioning will be completely related to the stuff you have tried to mention in your Resume. So always mention those things only about whom you can give the details.

Skills: Knowledge, Verbal Ability, Passion, Basic Concepts
College Name: Ludhiana College of Engineering and Technology

Interview Questionnaire 

2 Questions

  • Q1. 1.Being a mechanical Engineer, prepare IC engine well. 2.Be thorough with terms like toe in toe out, castor etc.
  • Q2. I was being asked about my project at apollo tyres where i did my internship.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I literally have no idea how my resume was shortlisted.

I applied via Recruitment Consultant and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is your job responsibilities?
  • Q2. Tell me about your experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - You will have to upload your updated resume and daily update your profile.

Quality Engineer Interview Questions & Answers

TVS Motor user image bikash chandra Behera

posted on 17 Oct 2017

I was interviewed before Oct 2016.

Interview Questionnaire 

1 Question

  • Q1. Why are you want this job
  • Ans. 

    I am passionate about ensuring quality standards are met and enjoy problem-solving in a technical environment.

    • Passionate about quality assurance

    • Enjoy problem-solving in technical environments

    • Excited about contributing to the success of the company

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Asking about my self. Then they asking some questions about lathe machine and dia
Tips: No

Round: HR Interview
Experience: They said about the company and salary and Benefits
Tips: No

Skills: Basic Knowledge
College Name: Gandhi academy of technology and engineering
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Walk-in and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is waner clipare listening?
  • Ans. 

    Waner clipare listening is a term used in quality engineering to describe the process of comparing two similar items or processes to identify differences.

    • Waner clipare listening involves carefully analyzing two items or processes to identify any discrepancies or variations.

    • This comparison is essential in quality engineering to ensure consistency and identify areas for improvement.

    • Examples of waner clipare listening inc...

  • Answered by AI
  • Q2. What is macro miter listening?
  • Ans. 

    Macro miter listening is a technique used in quality engineering to identify and address issues by actively listening to feedback and observations from a wide range of sources.

    • Macro miter listening involves gathering feedback and observations from various stakeholders including customers, employees, and suppliers.

    • It focuses on identifying patterns and trends in the feedback to address underlying issues and improve over...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Tata Motors Quality Engineer interview:
  • 2 year
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Assignment 

What is carburettor ,,

Round 2 - Technical 

(2 Questions)

  • Q1. What is carburettor
  • Ans. 

    A carburettor is a device in an internal combustion engine that mixes air with a fine spray of liquid fuel.

    • Carburettors are used in older vehicles to control the air-fuel mixture for combustion

    • They work by using the engine's vacuum to draw fuel into the engine

    • Carburettors have been largely replaced by fuel injection systems in modern vehicles

  • Answered by AI
  • Q2. Is it a heart of diesel engines
  • Ans. 

    Yes, the heart of a diesel engine is the fuel injection system.

    • The fuel injection system is responsible for delivering fuel into the combustion chamber at the right time and in the right amount.

    • It plays a crucial role in the performance and efficiency of the engine.

    • Examples of fuel injection systems include common rail, direct injection, and unit injector systems.

  • Answered by AI
Round 3 - Case Study 

Wha is turminal ,,,,

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I was interviewed in Jul 2024.

Round 1 - Technical 

(5 Questions)

  • Q1. Different between runout and concentricity
  • Ans. 

    Runout measures the total indicator reading (TIR) of a rotating part, while concentricity measures the center point of a feature relative to its axis.

    • Runout is the total indicator reading (TIR) of a rotating part, indicating how much the part deviates from a true circle when rotated.

    • Concentricity measures the center point of a feature relative to its axis, ensuring that the feature is centered around a common axis.

    • Runo...

  • Answered by AI
  • Q2. How to check powder coating without thickness meter
  • Ans. 

    Use visual inspection, cross-cut test, and weight measurement to check powder coating thickness without a thickness meter.

    • Perform visual inspection to check for any uneven coating or areas with no coating

    • Conduct a cross-cut test by making a small incision in the coating and checking the layers

    • Measure the weight of the coated object before and after coating to estimate the thickness

    • Compare the appearance and weight of t

  • Answered by AI
  • Q3. How to check roughness without roughness tester m/c
  • Ans. 

    Use visual and tactile inspection methods to check roughness without a roughness tester machine.

    • Use visual inspection to look for uneven surfaces, scratches, or irregularities

    • Use tactile inspection by running your fingers over the surface to feel for roughness

    • Compare the surface in question with a known standard of roughness for reference

    • Use a magnifying glass to inspect the surface closely for any imperfections

  • Answered by AI
  • Q4. UTM test of weld parts without UTM m/c
  • Ans. 

    UTM test of weld parts without UTM machine

    • Use destructive testing methods like bend test, tensile test, or hardness test to evaluate weld quality

    • Visual inspection can also be used to assess weld integrity

    • Ultrasonic testing can be utilized to detect flaws in the weld without UTM machine

  • Answered by AI
  • Q5. What is the dial gauge pressure unit
  • Ans. 

    The dial gauge pressure unit is a unit of measurement used to quantify pressure readings on a dial gauge.

    • The dial gauge pressure unit is typically measured in pounds per square inch (psi)

    • Other common units include bar, kilopascal (kPa), and atmospheres (atm)

    • The specific unit used will depend on the type of dial gauge being used

    • For example, a tire pressure gauge may display readings in psi, while a pressure cooker gauge

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I want to job manufacturing/production
With 3 year's experience in quality assurance

Interview Questionnaire 

1 Question

  • Q1. Introduction
  • Ans. I'm Prajakta chaware I belong to nagpur but I resently stay in Pune my qulification is BE in electrical engineer and password in 2020 year thank you
  • Answered by Prajakta Arun Chaware

Royal Enfield Interview FAQs

How many rounds are there in Royal Enfield Quality Engineer interview?
Royal Enfield interview process usually has 1 rounds. The most common rounds in the Royal Enfield interview process are Technical.
What are the top questions asked in Royal Enfield Quality Engineer interview?

Some of the top questions asked at the Royal Enfield Quality Engineer interview -

  1. Skill ass...read more
  2. All are technical related ...read more
  3. Process relared quest...read more

Tell us how to improve this page.

Royal Enfield Quality Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Royal Enfield Quality Engineer Salary
based on 127 salaries
₹1 L/yr - ₹6.5 L/yr
21% less than the average Quality Engineer Salary in India
View more details

Royal Enfield Quality Engineer Reviews and Ratings

based on 36 reviews

3.7/5

Rating in categories

3.3

Skill development

3.4

Work-life balance

3.9

Salary

3.4

Job security

3.3

Company culture

3.2

Promotions

3.4

Work satisfaction

Explore 36 Reviews and Ratings
Assistant Manager
969 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
496 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Store Executive
350 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Trainee
333 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
296 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Royal Enfield with

Bajaj Auto

3.9
Compare

Hero MotoCorp

4.1
Compare

TVS Motor

4.0
Compare

Yamaha Motor

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview