Filter interviews by
I applied via Company Website and was interviewed in Mar 2024. There were 4 interview rounds.
Grouting is a process of filling gaps or voids in soil, rock, or concrete with a fluid material to improve strength or reduce permeability.
Grouting is commonly used in construction to stabilize foundations or fill cracks in concrete structures.
Types of grouting include cement grouting, chemical grouting, and pressure grouting.
Grouting materials can include cement, bentonite, epoxy, or polyurethane.
Grouting can also be ...
Top trending discussions
posted on 28 Sep 2024
I applied via Walk-in and was interviewed in Aug 2024. There were 2 interview rounds.
The thickness of a tile can vary depending on the type and size of the tile being used.
Tile thickness typically ranges from 1/4 inch to 3/4 inch.
Larger tiles may have a thicker thickness to support their weight.
Thin tiles are often used for wall applications, while thicker tiles are used for flooring.
Porcelain tiles are usually thicker than ceramic tiles.
The thickness of marble can vary depending on the type and purpose, but it is typically between 3/4 inch to 1 1/4 inches.
Marble thickness can range from 3/4 inch to 1 1/4 inches
Thicker marble is often used for countertops and flooring
Thinner marble may be used for wall cladding or decorative purposes
The process of flooring involves selecting the appropriate materials, preparing the subfloor, laying the flooring material, and finishing with trim.
Selecting the appropriate flooring material based on the location and usage (e.g. hardwood, laminate, tile, carpet)
Preparing the subfloor by ensuring it is clean, level, and dry
Laying the flooring material according to manufacturer's instructions, starting from the center o...
Types of tiles include ceramic, porcelain, glass, and natural stone. Cement ratio in tile installation varies depending on the type of tile and substrate.
Types of tiles: ceramic, porcelain, glass, natural stone
Cement ratio varies based on tile type and substrate
Ceramic tiles typically require a 1:4 cement to water ratio for installation
Porcelain tiles may need a 1:3 cement to water ratio for proper adhesion
Flooring process involves selecting materials, preparing the subfloor, installing the flooring, and finishing with trim.
Selecting appropriate flooring material based on budget, durability, and aesthetics (e.g. hardwood, laminate, tile, carpet)
Preparing the subfloor by ensuring it is clean, level, and dry before installation
Installing the flooring by following manufacturer's instructions and using proper tools (e.g. adh...
The cement ratio for flooring depends on the type of flooring and the strength required.
The typical cement ratio for standard concrete flooring is 1:2:4 (cement:sand:aggregate)
For high strength flooring, the ratio can be increased to 1:1.5:3
For decorative or polished concrete flooring, a lower water-cement ratio is used to achieve a smoother finish
posted on 6 Jul 2024
I was interviewed in Jan 2024.
posted on 13 Jan 2024
I applied via Company Website and was interviewed in Dec 2023. There was 1 interview round.
I applied via Referral and was interviewed in Feb 2022. There were 2 interview rounds.
Answering questions related to projects, dynamic analysis, toughest project, pile foundations, and steel connection design.
Projects handled: Mention the types of projects, their scale, and your role in them.
Dynamic analysis methods: Explain different methods like time history analysis, response spectrum analysis, etc.
Modal combination methods: Discuss different methods like CQC, SRSS, ABS, etc., and their differences.
T...
posted on 11 Sep 2022
They know about me and my knowledge which have taken from last industries
I applied via Walk-in and was interviewed before Sep 2022. There were 2 interview rounds.
Steel lapping length is the required overlap of two steel bars to ensure proper structural integrity. Bar bending schedule is a detailed document showing the shape and dimensions of steel bars in a construction project. Contractor billing is calculated based on the work completed by the contractor.
Steel lapping length is typically specified in the structural drawings or design calculations.
Layout for steel bars should ...
posted on 15 Aug 2023
I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.
posted on 22 Apr 2024
I was interviewed in Nov 2023.
Discussion about planing, sheduling, exicution, cordination
posted on 1 May 2024
based on 3 reviews
Rating in categories
Assistant Manager
35
salaries
| ₹5.4 L/yr - ₹10.8 L/yr |
Civil Engineer
20
salaries
| ₹2.4 L/yr - ₹6.8 L/yr |
Tunnel Engineer
18
salaries
| ₹4 L/yr - ₹7.5 L/yr |
Surveyor
16
salaries
| ₹2.2 L/yr - ₹8.4 L/yr |
Senior Engineer
15
salaries
| ₹5 L/yr - ₹8.5 L/yr |
L&T Construction
L&T Energy Hydrocarbon
AECOM
Simplex Infrastructures