Upload Button Icon Add office photos

RITES

Compare button icon Compare button icon Compare

Filter interviews by

RITES Interview Questions, Process, and Tips

Updated 29 Jun 2024

Top RITES Interview Questions and Answers

View all 26 questions

RITES Interview Experiences

Popular Designations

26 interviews found

I applied via Walk-in and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Electrical substaion and HVAC system maintenance engineering

Round 2 - Technical 

(2 Questions)

  • Q1. Substation and electrical technical
  • Q2. Electrical sub station and HVAC system

Interview Preparation Tips

Topics to prepare for RITES General Manager Electrical interview:
  • Electricals
Interview preparation tips for other job seekers - In high rise building elector mechanical equipment maintenance.

General Manager Electrical Interview Questions asked at other Companies

Q1. What are the problem faced
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. What is network security and how you will mange the the organization security's?
  • Ans. 

    Network security involves implementing measures to protect the organization's network from unauthorized access or attacks.

    • Implementing firewalls to monitor and control incoming and outgoing network traffic

    • Using encryption to secure data transmission over the network

    • Regularly updating software and systems to patch vulnerabilities

    • Implementing strong authentication methods such as multi-factor authentication

    • Conducting reg...

  • Answered by AI
  • Q2. Share list of controls which are required to safe guard the organizations from perimeter to end points.
  • Ans. 

    Controls required to safeguard organizations from perimeter to end points include firewalls, antivirus software, encryption, access controls, and regular security audits.

    • Firewalls to monitor and control incoming and outgoing network traffic

    • Antivirus software to detect and remove malware

    • Encryption to protect sensitive data in transit and at rest

    • Access controls to limit user permissions and restrict unauthorized access

    • Re...

  • Answered by AI
  • Q3. What was your roles in responsibility in your earlier organizations..
  • Q4. How you will ensure the security of end points and applications..
  • Ans. 

    I will ensure the security of end points and applications by implementing strong access controls, regular security updates, and continuous monitoring.

    • Implementing strong access controls to restrict unauthorized access to end points and applications

    • Regularly updating security patches and software to protect against vulnerabilities

    • Implementing encryption to protect data in transit and at rest

    • Utilizing endpoint detection ...

  • Answered by AI
  • Q5. What is risk ?
  • Ans. 

    Risk is the potential for loss or harm resulting from a particular action or decision.

    • Risk is inherent in all aspects of life and business.

    • It involves uncertainty and the possibility of negative outcomes.

    • Risk can be managed through strategies such as risk assessment, mitigation, and transfer.

    • Examples of risks include financial risk, operational risk, and reputational risk.

  • Answered by AI
  • Q6. What is information security and what are the standard
  • Ans. 

    Information security refers to the practice of protecting information from unauthorized access, use, disclosure, disruption, modification, or destruction.

    • Information security involves implementing measures to ensure the confidentiality, integrity, and availability of data.

    • Common standards in information security include ISO/IEC 27001, NIST Cybersecurity Framework, and PCI DSS.

    • Examples of information security measures i...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for RITES Deputy General Manager interview:
  • Project Mangement,
  • Security operations
  • Risk management

Skills evaluated in this interview

Top RITES Deputy General Manager Interview Questions and Answers

Q1. Share list of controls which are required to safe guard the organizations from perimeter to end points.
View answer (2)

Deputy General Manager Interview Questions asked at other Companies

Q1. Share list of controls which are required to safe guard the organizations from perimeter to end points.
View answer (2)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. What is your previous Experience?
  • Q2. How can you contribute to our company?
  • Q3. What is your strength?
  • Q4. Technical Questions
  • Q5. What is your notice period?

Interview Preparation Tips

Interview preparation tips for other job seekers - Always Speak the truth in PSU's interview.

Assistant Manager Interview Questions asked at other Companies

Q1. You are Handling cash operations then how you manage operations with sales ?
View answer (87)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Quality related questions
  • Q2. How to made checklist for inspection
  • Ans. 

    Checklist for inspection can be made by identifying key inspection points, setting inspection frequency, including relevant regulations and standards, and ensuring clear documentation.

    • Identify key inspection points based on equipment or process being inspected

    • Set inspection frequency based on criticality and risk factors

    • Include relevant regulations, standards, and best practices in the checklist

    • Ensure clear documentati...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Na

Inspection Engineer Interview Questions asked at other Companies

Q1. What is least count of any measuring instrument?
View answer (2)

RITES interview questions for popular designations

 Assistant Manager

 (3)

 Inspection Engineer

 (3)

 Deputy General Manager

 (2)

 Loco Pilot

 (2)

 Assistant Manager Civil

 (1)

 Civil Engineer

 (1)

 Computer Operator

 (1)

 Electrical Engineer

 (1)

I applied via Referral and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Metrology and testing question

Interview Preparation Tips

Interview preparation tips for other job seekers - Always prepare material testing topic for tpi

Quality Supervisor Interview Questions asked at other Companies

Q1. HOW MANY METHOD OF QUALITY CHECKING
View answer (4)

Get interview-ready with Top RITES Interview Questions

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Aptitude Test 

Questions from mostly from quality, manufacturing, industrial engineering came. Also few qn from thermodynamics, machine design, strength of Material came.

Round 3 - Technical 

(4 Questions)

  • Q1. Why tractors have larger rear wheels?
  • Ans. 

    Tractors have larger rear wheels for better traction, stability, and weight distribution.

    • Larger rear wheels provide better traction on uneven or slippery surfaces.

    • The weight of the tractor is primarily distributed towards the front due to the heavy engine and attachments. Larger rear wheels help balance the weight distribution.

    • The larger surface area of the rear wheels helps in reducing ground pressure, preventing sink...

  • Answered by AI
  • Q2. Draw power flow schematic diagram for a tractor.
  • Ans. 

    A power flow schematic diagram for a tractor.

    • Start with the engine as the power source

    • Show the power flow to the transmission

    • Include the power flow to the wheels

    • Illustrate any additional components such as hydraulic systems or electrical systems

  • Answered by AI
  • Q3. What is least count of any measuring instrument?
  • Ans. 

    The least count of a measuring instrument is the smallest value that can be measured by the instrument.

    • The least count is determined by the smallest division on the scale of the instrument.

    • It represents the precision or accuracy of the instrument.

    • For example, a ruler with millimeter divisions has a least count of 1 mm.

    • A Vernier caliper with divisions up to 0.1 mm has a least count of 0.1 mm.

    • The least count is important...

  • Answered by AI
  • Q4. What are PERT & CPM
  • Ans. 

    PERT & CPM are project management techniques used to plan, schedule, and control complex projects.

    • PERT stands for Program Evaluation and Review Technique, while CPM stands for Critical Path Method.

    • PERT is used for projects with high uncertainty and risk, while CPM is used for projects with well-defined activities and timelines.

    • Both techniques involve breaking down a project into smaller tasks, estimating the time and r...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for RITES Inspection Engineer interview:
  • Quality Inspection
  • six sigma implementation
  • industrial instrumentation
  • Metrology
Interview preparation tips for other job seekers - Need to be exposed to industry practices. Aware of metrology & quality tools.

Inspection Engineer Interview Questions asked at other Companies

Q1. What is least count of any measuring instrument?
View answer (2)

Interview Questionnaire 

1 Question

  • Q1. Why Do You Want to Work at This Company?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and An interviewer may ask how you perceive his company's position in its industry, who the firm's competitors are, what its competitive advantages are, and how it should best go forward. For this reason, avoid trying to thoroughly research a dozen different industries. Focus your job search on just a few industries instead.

Shift Incharge Interview Questions asked at other Companies

Q1. Tell me about power factor and how to keep always .80?
View answer (5)

Interview Questionnaire 

5 Questions

  • Q1. 1.Introduce yourself?
  • Q2. 2.How Blocked rotor test is performed for 3 ph induction motor and what does it give?
  • Ans. 

    Blocked rotor test is performed on a 3-phase induction motor to determine its impedance and calculate its locked rotor current.

    • The motor is connected to a 3-phase supply with the rotor blocked.

    • The voltage and current are measured and used to calculate the motor's impedance.

    • The locked rotor current can be determined from the impedance.

    • The test helps in assessing the motor's performance and identifying any faults or issu

  • Answered by AI
  • Q3. 3.Why single phase induction motor is not self stating? what are the different methods of starting of single phase motor?
  • Ans. 

    Single phase induction motor is not self-starting due to the absence of rotating magnetic field. Different methods of starting include capacitor start, split-phase, shaded pole, and reluctance start.

    • Single phase induction motor lacks rotating magnetic field

    • Capacitor start uses a capacitor to create a phase shift and start the motor

    • Split-phase uses a starting winding to create a phase shift

    • Shaded pole uses a shading coi...

  • Answered by AI
  • Q4. 4.what are the different methods of resistance measurement (low, medium and high) and their ranges?
  • Ans. 

    Different methods of resistance measurement and their ranges

    • Low resistance measurement: 4-wire Kelvin method, range 0.1 μΩ to 1 Ω

    • Medium resistance measurement: 2-wire method, range 1 Ω to 1 MΩ

    • High resistance measurement: Megohmmeter method, range 1 MΩ to 10 TΩ

    • Other methods include 3-wire method and 4-wire guarded method

    • Measurement accuracy depends on the method used and the quality of the equipment

  • Answered by AI
  • Q5. 5.Why lighting arresters are used in transmission lines?
  • Ans. 

    Lightning arresters are used in transmission lines to protect the equipment and infrastructure from damage caused by lightning strikes.

    • Lightning arresters divert the high voltage surge caused by lightning strikes to the ground, preventing it from damaging the transmission lines.

    • They provide a low-resistance path for the lightning current to flow, reducing the risk of electrical breakdown and flashovers.

    • Lightning arrest...

  • Answered by AI

Electrical Engineer Interview Questions asked at other Companies

Q1. What is the difference between Switch gear & Circuit Breakers ?
View answer (11)
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 2 - Coding Test 

Sap

Interview Preparation Tips

Interview preparation tips for other job seekers - I have 1 year experience in bhilai steel plant as a computer oprater

Computer Operator Interview Questions asked at other Companies

Q1. Which program language do you use regularly in your work
View answer (3)

I applied via Company Website and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Define CBR test and its implications
  • Ans. 

    CBR test is a laboratory test used to determine the strength and bearing capacity of soil.

    • CBR stands for California Bearing Ratio.

    • It is a measure of the relative strength of a soil sample.

    • The test involves compacting a soil sample in a mold and subjecting it to a standard load.

    • The load penetration is measured and compared to standard values.

    • CBR values are used in the design of pavements and other civil engineering stru...

  • Answered by AI
  • Q2. Sub grade FDD required as per Morth.
  • Ans. 

    Sub grade FDD is required as per Morth.

    • FDD stands for Field Density Test.

    • Morth refers to the Ministry of Road Transport and Highways.

    • Sub grade FDD is necessary to determine the compaction and strength of the sub grade soil.

    • It helps in ensuring the stability and durability of the road pavement.

    • FDD results are used to assess the quality of the sub grade and make necessary improvements.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be prepared for technical questions, this is for the interview on contract basis.

Civil Engineer Interview Questions asked at other Companies

Q1. What is the curing formalities for our precast segment???
View answer (20)

RITES Interview FAQs

How many rounds are there in RITES interview?
RITES interview process usually has 1-2 rounds. The most common rounds in the RITES interview process are Technical, Resume Shortlist and Aptitude Test.
How to prepare for RITES interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at RITES. The most common topics and skills that interviewers at RITES expect are AutoCAD, Civil Engineering, Mechanical, Accounting and CAD.
What are the top questions asked in RITES interview?

Some of the top questions asked at the RITES interview -

  1. 3.Why single phase induction motor is not self stating? what are the different ...read more
  2. 2.How Blocked rotor test is performed for 3 ph induction motor and what does it...read more
  3. What is least count of any measuring instrume...read more

Tell us how to improve this page.

RITES Interview Process

based on 22 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

NTPC Interview Questions
4.2
 • 159 Interviews
BHEL Interview Questions
4.1
 • 109 Interviews
Engineers India Interview Questions
4.3
 • 71 Interviews
Mecon Interview Questions
3.9
 • 41 Interviews
View all

RITES Reviews and Ratings

based on 535 reviews

3.9/5

Rating in categories

3.7

Skill development

3.7

Work-life balance

3.5

Salary

3.6

Job security

3.5

Company culture

3.0

Promotions

3.5

Work satisfaction

Explore 535 Reviews and Ratings
Civil Engineer
139 salaries
unlock blur

₹2 L/yr - ₹9.9 L/yr

Mechanical Engineer
107 salaries
unlock blur

₹3.4 L/yr - ₹6 L/yr

Assistant Manager
102 salaries
unlock blur

₹5 L/yr - ₹17.4 L/yr

Engineer
91 salaries
unlock blur

₹3 L/yr - ₹10 L/yr

Inspection Engineer
89 salaries
unlock blur

₹3.3 L/yr - ₹8.5 L/yr

Explore more salaries
Compare RITES with

Ircon International

3.9
Compare

Mecon

3.9
Compare

BHEL

4.1
Compare

Container Corporation of India

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview