Upload Button Icon Add office photos

RITES

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

RITES Civil Engineer Interview Questions and Answers

Updated 16 Mar 2022

RITES Civil Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Define CBR test and its implications
  • Ans. 

    CBR test is a laboratory test used to determine the strength and bearing capacity of soil.

    • CBR stands for California Bearing Ratio.

    • It is a measure of the relative strength of a soil sample.

    • The test involves compacting a soil sample in a mold and subjecting it to a standard load.

    • The load penetration is measured and compared to standard values.

    • CBR values are used in the design of pavements and other civil engineering stru...

  • Answered by AI
  • Q2. Sub grade FDD required as per Morth.
  • Ans. 

    Sub grade FDD is required as per Morth.

    • FDD stands for Field Density Test.

    • Morth refers to the Ministry of Road Transport and Highways.

    • Sub grade FDD is necessary to determine the compaction and strength of the sub grade soil.

    • It helps in ensuring the stability and durability of the road pavement.

    • FDD results are used to assess the quality of the sub grade and make necessary improvements.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be prepared for technical questions, this is for the interview on contract basis.

Interview questions from similar companies

I was interviewed before May 2016.

Interview Questionnaire 

1 Question

  • Q1. Question about and finance, payment terms , bank guarantee

Interview Preparation Tips

Round: Test
Experience: I had to answer 100 questions in 120 minutes
Duration: 2 hours
Total Questions: 100

Round: Technical + HR Interview
Experience: I had to think and answer the tricky questions asked to me.

I applied via Naukri.com and was interviewed before Mar 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Share your job site experience like what exactly you do there?
  • Q2. What are your job responsibility at your previous companies?
  • Q3. What is your opinion about health, safety and environment. It is responsibility everyone at jobsite or only for safety engineer? Please explain
  • Q4. What are your softskills?

Interview Preparation Tips

Interview preparation tips for other job seekers - Tell the interviewer exactly what you know about your current job and denly what you don't know. Know your job responsibilities and what can you do additional.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Sep 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Material related, supper structure
  • Q2. Testing,Form work,Billing
Round 2 - Technical 

(2 Questions)

  • Q1. Pile, Pile testing & Quality control,Estimate
  • Q2. Form work,Billing,Building work & structure

I applied via Company Website and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Flow calculation on orifice plate
  • Ans. 

    Flow calculation on orifice plate

    • Determine the differential pressure across the orifice plate

    • Calculate the flow rate using the orifice equation

    • Consider the fluid properties and orifice plate dimensions

  • Answered by AI
  • Q2. About basic instrumentation
  • Q3. Control system and their functionality
  • Ans. 

    Control systems are used to manage and regulate processes or machines.

    • Control systems use sensors to measure inputs and outputs to adjust the system accordingly.

    • They can be open-loop or closed-loop systems.

    • Examples include thermostats, cruise control in cars, and autopilot in airplanes.

    • Control systems can be designed using various techniques such as PID control, fuzzy logic, and neural networks.

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. No salary negotiations being a public sector only location preference.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while giving the answers and You should be technically sound for qualifying.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

It about Indian civilization

Round 2 - Aptitude Test 

Easy questions to answer the every question

I applied via Naukri.com and was interviewed in Mar 2021. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What are your roles in your current job
  • Ans. Explaned about my roles and responsibilities
  • Answered Anonymously
  • Q2. How do you tackle vibrations in axial fans
  • Ans. 

    To tackle vibrations in axial fans, proper balancing, alignment, and maintenance are essential.

    • Perform dynamic balancing of the fan blades to minimize vibrations.

    • Ensure proper alignment of the fan with the motor and the surrounding structure.

    • Regularly inspect and maintain the fan components to prevent wear and tear.

    • Use vibration analysis techniques to identify and address any potential issues.

    • Consider installing vibrat...

  • Answered by AI
  • Q3. What are the challenges you faced your job
  • Ans. Explained about our ID fan hydro coupling issue
  • Answered Anonymously
  • Q4. What permit system do you follow
  • Ans. 

    We follow a permit system based on the project requirements and local regulations.

    • Our permit system ensures compliance with safety standards and legal requirements.

    • We obtain permits for activities such as construction, electrical work, and hazardous material handling.

    • The specific permit requirements vary depending on the nature of the project and the location.

    • We work closely with regulatory authorities to ensure timely...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Know the constraints in your answer so that interviewer not go further into particular topic

I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself.
  • Q2. Notice period of my present organisation
Round 2 - Technical 

(1 Question)

  • Q1. Site based question about TG Deck Slab, Ash Handling Package

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and if you r experienced like me, you should be well prepared about practical experience.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. 1)What is the difference of contraction joint & expansion joint in pqc road? 2) why need curing after concreteing? 3) what do u mean by M20 gread of concrete. 3,) what is scaffolding & why need? 4) differ...
  • Ans. 

    Answers to questions related to civil engineering interview.

    • Contraction joints are used to prevent cracking due to shrinkage, while expansion joints allow for the expansion and contraction of concrete.

    • Curing is necessary after concreteing to prevent moisture loss, maintain proper hydration, and enhance the strength and durability of the concrete.

    • M20 grade of concrete refers to the mix ratio of cement, sand, and aggrega...

  • Answered by AI
  • Q2. 3,) scaffolding is a structure which is made by gi pipe , bracing,u juck head juck, coupler use for height work, shuttering work & there supporting etc.
  • Q3. 2) for gating good strength
  • Ans. 

    Good strength in civil engineering can be achieved through proper gating techniques.

    • Use high-quality materials for construction

    • Ensure proper mixing of concrete and other materials

    • Follow proper curing techniques

    • Use reinforcement bars and other strengthening methods

    • Perform regular maintenance and inspections

    • Consider factors such as load capacity and environmental conditions

    • Use computer simulations and modeling to optimiz...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be positive and take self prepray for next level interview.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Gate 2017 test for appti. bsnsn

Round 2 - Interview 

(2 Questions)

  • Q1. What is your r strength
  • Q2. How do you read newspapers

Interview Preparation Tips

Interview preparation tips for other job seekers - Company not suggested.. Join IOcl it's better
Contribute & help others!
anonymous
You can choose to be anonymous

RITES Interview FAQs

How many rounds are there in RITES Civil Engineer interview?
RITES interview process usually has 1 rounds. The most common rounds in the RITES interview process are Technical.
How to prepare for RITES Civil Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at RITES. The most common topics and skills that interviewers at RITES expect are Civil Engineering, Building Construction, Construction Engineering and Site Engineering.
What are the top questions asked in RITES Civil Engineer interview?

Some of the top questions asked at the RITES Civil Engineer interview -

  1. Sub grade FDD required as per Mor...read more
  2. Define CBR test and its implicati...read more

Recently Viewed

JOBS

GlobalLogic

No Jobs

SALARIES

GlobalStep

INTERVIEWS

GlobalStep

No Interviews

DESIGNATION

SALARIES

Niramai Health Analytix

SALARIES

Bentley Systems

JOBS

Razorpay

No Jobs

SALARIES

nference

INTERVIEWS

Gap

No Interviews

SALARIES

nference

Tell us how to improve this page.

RITES Civil Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
RITES Civil Engineer Salary
based on 150 salaries
₹3 L/yr - ₹9.3 L/yr
6% more than the average Civil Engineer Salary in India
View more details

RITES Civil Engineer Reviews and Ratings

based on 31 reviews

3.9/5

Rating in categories

3.9

Skill development

3.5

Work-life balance

3.4

Salary

3.5

Job security

3.6

Company culture

3.0

Promotions

3.3

Work satisfaction

Explore 31 Reviews and Ratings
Civil Engineer
150 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
108 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
91 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Inspection Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare RITES with

Ircon International

3.9
Compare

Mecon

3.9
Compare

BHEL

4.1
Compare

Container Corporation of India

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview