AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
RITES Interview Questions, Process, and Tips
Top RITES Interview Questions and Answers
- Q1. Share list of controls which are required to safe guard the organizations from perimeter to end points.asked in Deputy General Manager interview
- Q2. What is least count of any measuring instrument?asked in Inspection Engineer interview
- Q3. 3.Why single phase induction motor is not self stating? what are the different methods of starting of single phase motor?asked in Electrical Engineer interview
RITES Interview Experiences
26 interviews found
Anonymous
Interview Questionnaire
5 Questions
- Q1. 1.Introduce yourself?
- Q2. 2.How Blocked rotor test is performed for 3 ph induction motor and what does it give?
- Ans.
Blocked rotor test is performed on a 3-phase induction motor to determine its impedance and calculate its locked rotor current.
The motor is connected to a 3-phase supply with the rotor blocked.
The voltage and current are measured and used to calculate the motor's impedance.
The locked rotor current can be determined from the impedance.
The test helps in assessing the motor's performance and identifying any faults or issu
- Q3. 3.Why single phase induction motor is not self stating? what are the different methods of starting of single phase motor?
- Ans.
Single phase induction motor is not self-starting due to the absence of rotating magnetic field. Different methods of starting include capacitor start, split-phase, shaded pole, and reluctance start.
Single phase induction motor lacks rotating magnetic field
Capacitor start uses a capacitor to create a phase shift and start the motor
Split-phase uses a starting winding to create a phase shift
Shaded pole uses a shading coi...
- Q4. 4.what are the different methods of resistance measurement (low, medium and high) and their ranges?
- Ans.
Different methods of resistance measurement and their ranges
Low resistance measurement: 4-wire Kelvin method, range 0.1 μΩ to 1 Ω
Medium resistance measurement: 2-wire method, range 1 Ω to 1 MΩ
High resistance measurement: Megohmmeter method, range 1 MΩ to 10 TΩ
Other methods include 3-wire method and 4-wire guarded method
Measurement accuracy depends on the method used and the quality of the equipment
- Q5. 5.Why lighting arresters are used in transmission lines?
- Ans.
Lightning arresters are used in transmission lines to protect the equipment and infrastructure from damage caused by lightning strikes.
Lightning arresters divert the high voltage surge caused by lightning strikes to the ground, preventing it from damaging the transmission lines.
They provide a low-resistance path for the lightning current to flow, reducing the risk of electrical breakdown and flashovers.
Lightning arrest...
Electrical Engineer Interview Questions asked at other Companies
Selected
I applied via Company Website and was interviewed in Sep 2023. There was 1 interview round.
(8 Questions)
- Q1. What do you mean by deep and excavation? Followed by related question on safety precaution during deep excavation.
- Ans. I have given the answer about deep excavation and safety precaution for deep excavation like sloping, benching, shoring
- Q2. Most critical activity now a days regarding safety field
- Q3. Question regarding safety precaution on work at height
- Q4. Question related on scaffold and scaffold tag
- Ans. Given answer and little discussion on yellow scaffold tag and who will maintain scaffold tag.
- Q5. Question related to traffic management
- Q6. Question related to tunnel collapse scenario and emergency rescue procedure
- Q7. Question related work ex
- Q8. Why do you want to join company
Interview Preparation Tips
shiva sankar
(2 Questions)
- Q1. Based on Experience
- Q2. CV related and experience report
Interview Preparation Tips
Assistant Manager Interview Questions asked at other Companies
(2 Questions)
- Q1. About locomotive.
- Q2. Job responsibilities.
Loco Pilot Interview Questions asked at other Companies
RITES interview questions for popular designations
I applied via Company Website
(1 Question)
- Q1. Heat treatment process
Interview Preparation Tips
First understand your job role if you are experienced.
Next, understand the company profile which you are looking.
Assistant Manager Interview Questions asked at other Companies
Get interview-ready with Top RITES Interview Questions
I applied via Company Website and was interviewed in Jun 2023. There were 3 interview rounds.
(1 Question)
- Q1. Only Document Verification
(2 Questions)
- Q1. Explain about Initial and Routine Pile Load Test
- Ans.
Initial and Routine Pile Load Tests are conducted to assess the load-bearing capacity and performance of piles.
Initial Pile Load Test is performed on a single pile to determine its ultimate load capacity and settlement behavior.
Routine Pile Load Test is conducted on a representative sample of piles to verify the design assumptions and ensure the desired performance.
Initial Pile Load Test involves applying a gradually i...
- Q2. Explain about Performance Test of Elastomeric Bearings
- Ans.
Performance test of elastomeric bearings evaluates their ability to withstand load, deformation, and environmental conditions.
Performance test assesses the load-carrying capacity of elastomeric bearings.
It measures the deformation and displacement under different loads.
Tests evaluate the behavior of bearings under various environmental conditions like temperature and moisture.
Performance tests ensure the durability, st...
Skills evaluated in this interview
Site Engineer Interview Questions asked at other Companies
135/150 there were 75 questions of 2 marks of basic aptitude but time is also 1 hour
(2 Questions)
- Q1. They ask me about my civil engineering basics and my critical thinking Tell me about your self
- Q2. How stress is related to strain
- Ans.
Stress and strain are related as stress is the force applied per unit area, while strain is the deformation caused by stress.
Stress is the force applied per unit area, while strain is the deformation caused by stress.
Stress is measured in units of force per unit area, such as pounds per square inch (psi) or pascals (Pa).
Strain is measured as the change in length or shape of a material due to stress, and is typically ex...
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions asked at other Companies
I was interviewed in Sep 2023.
(2 Questions)
- Q1. Quality products and testing load
- Q2. Quality and testing load
Interview Preparation Tips
Quality Engineer Interview Questions asked at other Companies
Selected
I applied via Walk-in and was interviewed in Dec 2022. There were 2 interview rounds.
(4 Questions)
- Q1. Any questions for loco operator
- Q2. Any Loco OPERATOR queries
- Q3. Yes any questions for loco operation
- Q4. Question loco operator
Interview Preparation Tips
Loco Pilot Interview Questions asked at other Companies
I applied via Company Website
Technical and general skill capability test conducted to shortlist suitale condidates.
About current affairs and views/ vison on the Company policy.
(3 Questions)
- Q1. Different topics in the field of civil Engineering.
- Q2. Different questions from the field of experience may be asked.
- Q3. Interview questions should be asked based upon major infrastructures projects.
Interview Preparation Tips
Interviewer Interview Questions asked at other Companies
I applied via Newspaper Ad and was interviewed in Oct 2022. There were 2 interview rounds.
(2 Questions)
- Q1. About steel,NDT testing and from your past working experiences
- Q2. Tell me about steel and it's classification. Types of NDT testing. About Stainless steel and cast iron.
Interview Preparation Tips
Top trending discussions
RITES Interview FAQs
Recently Viewed
LIST OF COMPANIES
Saint-Gobain
Locations
INTERVIEWS
BHEL
No Interviews
INTERVIEWS
InMobi
No Interviews
INTERVIEWS
Citadel
No Interviews
INTERVIEWS
Optiver
No Interviews
INTERVIEWS
RITES
No Interviews
SALARIES
Ola Electric Mobility
REVIEWS
JK Cement
No Reviews
SALARIES
Larsen & Toubro Limited
INTERVIEWS
RITES
No Interviews
Tell us how to improve this page.
RITES Interviews By Designations
- RITES Inspection Engineer Interview Questions
- RITES Assistant Manager Interview Questions
- RITES Loco Pilot Interview Questions
- RITES Deputy General Manager Interview Questions
- RITES Engineer Interview Questions
- RITES Electrical Engineer Interview Questions
- RITES Computer Operator Interview Questions
- RITES Quality Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Executive Interview Questions
- Associate Interview Questions
- Design Engineer Interview Questions
- Intern Interview Questions
- Business Analyst Interview Questions
- Senior Associate Interview Questions
- Associate Software Engineer Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Show more
RITES Interview Process
based on 22 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
|
Civil Engineer
150
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Mechanical Engineer
108
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Assistant Manager
102
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Engineer
91
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Inspection Engineer
86
salaries
| ₹0 L/yr - ₹0 L/yr |
Ircon International
Mecon
BHEL
Container Corporation of India
- Home >
- Interviews >
- RITES Interview Questions
