Filter interviews by
The question asks to calculate the quantity of slrb and canal earthworks.
To calculate the quantity of slrb, you need to know the dimensions and specifications of the slrb.
To calculate the quantity of canal earthworks, you need to know the length, width, and depth of the canal.
You may also need to consider any slopes, embankments, or other factors that could affect the earthworks quantity.
I worked as a Civil Site Engineer at XYZ Construction Company.
Managed and supervised construction projects
Ensured compliance with building codes and regulations
Prepared and reviewed project plans and specifications
Coordinated with architects, contractors, and subcontractors
Performed site inspections and quality control checks
Resolved any issues or conflicts that arose during construction
Maintained project documentation
Bed and top width of canal can be calculated using Manning's formula and cross-sectional area of the canal.
Calculate the cross-sectional area of the canal using Manning's formula
Determine the depth of water in the canal
Calculate the bed width by dividing the cross-sectional area by the depth of water
Calculate the top width by adding twice the depth of water to the bed width
I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.
Mivan formwork is a construction technique that uses aluminum formwork system for casting concrete structures.
Mivan formwork involves setting up aluminum formwork panels, fixing reinforcement bars, pouring concrete, and removing the formwork after the concrete has set.
It is a fast and efficient construction method commonly used for high-rise buildings and large residential projects.
The system allows for smooth finishes...
posted on 25 Mar 2023
I applied via Newspaper Ad and was interviewed in Feb 2023. There were 3 interview rounds.
posted on 12 Jul 2023
I applied via Walk-in
In these round we just screening the students for next round GD is the process in which we just see the attitude, discipline and how they expressed there idea towards the topic that we give to them.
I have more knowledge in structural engineering.
Specialization in structural analysis and design
Extensive experience in designing buildings, bridges, and other structures
Knowledge of various materials and construction techniques
Familiarity with relevant codes and standards
Ability to perform structural calculations and simulations
I applied via Naukri.com and was interviewed in Oct 2021. There were 3 interview rounds.
posted on 11 May 2018
I applied via Naukri.com and was interviewed before May 2017. There was 1 interview round.
The density of soil in the embankment layer varies depending on the type of soil and compaction methods used.
The density of soil in the embankment layer is typically measured in terms of dry density or wet density.
Dry density refers to the mass of solid soil particles per unit volume of soil, while wet density includes the mass of water as well.
The density of soil in the embankment layer is influenced by factors such a...
posted on 17 Jul 2017
I appeared for an interview before Jul 2016.
The density of cement is around 1440 kg/m³.
The density of cement varies depending on the type of cement.
The density of Portland cement is around 1440 kg/m³.
The density of lightweight cement is around 1000 kg/m³.
The density of high-density cement is around 3000 kg/m³.
Clear cover in column refers to the distance between the surface of the reinforcement and the outer surface of the concrete.
Clear cover is important to protect the reinforcement from corrosion and to ensure proper bonding between the reinforcement and concrete.
The required clear cover for columns depends on factors such as the type of structure, exposure conditions, and size of the reinforcement.
For example, in a coast...
Bending moment formula calculates the internal bending moment in a beam or structure.
Bending moment formula is M = F * d
M is the bending moment, F is the force applied, and d is the distance from the force to the point of interest
Bending moment can be positive or negative depending on the direction of the force and the orientation of the beam
Bending moment is an important factor in designing and analyzing structures
The thickness of compreg ply varies depending on its intended use and application. Its size can also vary depending on the manufacturer and customer requirements.
The thickness of compreg ply can range from 3mm to 25mm or more
The size of compreg ply can vary from 4ft x 8ft to 5ft x 10ft or more
The thickness and size of compreg ply can be customized based on the specific requirements of the project
Compreg ply is commonly...
The maximum repetition of ply shuttering depends on various factors such as quality of ply, weather conditions, and type of concrete.
The maximum repetition of ply shuttering can range from 5 to 20 times depending on the above factors.
If the quality of ply is good and weather conditions are favorable, the ply shuttering can be reused more number of times.
However, if the concrete mix is harsh or the weather conditions ar...
The consumption of shuttering oil per liter depends on the area covered.
The consumption of shuttering oil per liter can vary depending on factors such as the type of shuttering material, surface texture, and weather conditions.
On average, 1 liter of shuttering oil can cover approximately 10-15 square meters of surface area.
However, this can vary significantly based on the absorbency of the surface and the thickness of ...
The elongation % of fe550 steel varies depending on the specific grade and manufacturing process.
The elongation % of fe550 steel can range from 14% to 20%.
It is important to refer to the specifications provided by the manufacturer for accurate information.
The elongation % indicates the ability of the steel to deform before breaking under tension.
Fe550 steel is commonly used in construction and reinforcement application
Rolling margin of steel is the difference between the target thickness and the actual thickness after rolling.
Rolling margin is a measure of the accuracy of the rolling process.
It is calculated by subtracting the actual thickness of the steel after rolling from the target thickness.
A positive rolling margin means the steel is thicker than intended, while a negative rolling margin means it is thinner.
Rolling margin is i...
based on 3 reviews
Rating in categories
Accountant
22
salaries
| ₹2.4 L/yr - ₹4.8 L/yr |
Senior Engineer
15
salaries
| ₹4.2 L/yr - ₹7.2 L/yr |
Civil Site Engineer
10
salaries
| ₹1.1 L/yr - ₹3.8 L/yr |
Senior Site Engineer
7
salaries
| ₹6 L/yr - ₹6.4 L/yr |
Junior Engineer Civil
7
salaries
| ₹1.5 L/yr - ₹3.5 L/yr |
Lea Associates South Asia
McNally Bharat Engineering
R.V.R. PROJECTS
ABCI Infrastructures