Psp Projects Assistant Billing Engineer Interview Questions and Answers for Freshers

Q1. Rates of sub-contractors . Billing process. Reconciliation means and how it is done. Rate Analysis. Key points of your last project. Type of structure that you had seen in your last company. And their deta...read more
Ans. 
The interview covered topics such as rates of sub-contractors, billing process, reconciliation, rate analysis, previous project experience, and types of structures encountered.
• Explained the process of obtaining rates from sub-contractors and how they are incorporated into the billing process

• Discussed the importance of reconciliation in ensuring accurate billing and payment

• Described the process of rate analysis and how ...read more
Answered by AI
Add your answer

Estimation of a small building.

Q1. Ratio of block work motor and plastrimg motor.
Ans. 
The ratio of block work motor to plastering motor is typically 1:3.
• The ratio of block work motor to plastering motor is usually 1:3.

• This means for every 1 part of block work motor, 3 parts of plastering motor are used.

• The ratio may vary depending on the specific project requirements.
Answered by AI
Add your answer
Q2. Per day productivity of a labour
Ans. 
The productivity of a laborer can be calculated by the amount of work completed in a day.
• Productivity is measured by the amount of work completed in a specific time frame, in this case, per day.

• Factors affecting productivity include skill level, motivation, tools/equipment available, and working conditions.

• Example: A construction worker completing 10 tasks in a day is more productive than one completing only 5 tasks.
Answered by AI
Add your answer
Q3. Amount of binding wire to be used per tone of reinforcement
Ans. 
Binding wire is typically used at a rate of 8-10 kg per ton of reinforcement.
• Typically, 8-10 kg of binding wire is used per ton of reinforcement to secure the bars in place.

• The amount of binding wire needed may vary based on the complexity of the reinforcement design and the spacing between bars.

• Using too little binding wire can result in inadequate reinforcement stability, while using too much can be wasteful and incr
Answered by AI
Add your answer
Q4. Density of materials
Ans. 
Density of materials is a measure of how much mass is contained in a given volume.
• Density is typically measured in units such as grams per cubic centimeter (g/cm^3) or kilograms per liter (kg/L).

• Materials with higher density have more mass packed into a given volume.

• Common examples of materials with high density include metals like lead and gold.

• Materials with low density include gases like helium and liquids like oil.
Answered by AI
Add your answer

Q1. Salary discussed
Add your answer

Q1. Bar Bending Schedule
Add your answer
Q2. Find out shuttering Area
Ans. 
Shuttering area can be calculated by finding the total surface area of the formwork used for concrete construction.
• Calculate the surface area of each individual formwork used for the concrete structure

• Add up the surface areas of all formworks to get the total shuttering area

• Consider any openings or gaps in the formwork when calculating the area
Answered by AI
Add your answer
Q3. Semi circle area formula
Ans. 
The formula for the area of a semi-circle is (1/2) * pi * r^2, where r is the radius of the semi-circle.
• The formula for the area of a semi-circle is (1/2) * pi * r^2

• The radius (r) is half the diameter of the circle

• Example: If the radius of a semi-circle is 5 cm, the area would be (1/2) * 3.14 * 5^2 = 39.25 cm^2
Answered by AI
Add your answer

Q1. Why u want to join this company ?
Add your answer
Q2. Why u want to quit Your present company
Add your answer
Q3. About my Salary
Add your answer

Any civil engineer work 12 year experience

Q1. What is your company name
Ans. 
Our company name is XYZ Engineering Solutions, specializing in civil engineering projects.
• XYZ Engineering Solutions is a reputable firm in the civil engineering industry

• We have successfully completed projects such as bridge construction, road infrastructure development, and building design

• Our team of experienced engineers and architects ensure high-quality and innovative solutions
Answered by AI
Add your answer
Q2. Location in my nearest home town
Add your answer

Q1. What is BMD & SFD
Ans. 
BMD stands for Bending Moment Diagram and SFD stands for Shear Force Diagram in civil engineering.
• BMD shows the variation of bending moment along the length of a beam.

• SFD shows the variation of shear force along the length of a beam.

• Both diagrams are essential for analyzing the internal forces in a structure.

• BMD and SFD are commonly used in structural analysis and design.

• Understanding BMD and SFD helps in determining t
Answered by AI
Add your answer

Q1. From civil IS CODES
Add your answer
Q2. About steel reinforcements, bbs,various tests
Add your answer

Q1. How to control quality.
Ans. 
Quality control in civil engineering involves implementing processes to ensure that construction projects meet specified standards and requirements.
• Establishing quality control procedures and protocols

• Regular inspections and testing of materials and workmanship

• Training and educating staff on quality standards

• Implementing corrective actions when deviations are identified

• Utilizing quality control tools such as checklists
Answered by AI
Add your answer
Q2. What is BBS is code.
Ans. 
BBS in code refers to Bar Bending Schedule as per Indian standards.
• BBS stands for Bar Bending Schedule.

• It is a detailed list of reinforcement bars to be used in a construction project.

• It includes information on bar sizes, shapes, quantities, and placement.

• BBS is prepared as per the requirements of Indian standards like IS 2502:1963.

• It helps in ensuring proper reinforcement placement and quantity in the structure.
Answered by AI
Add your answer

Q1. What is the minimum compressive strength of M25 grade concrete?
Ans. 
M25 grade concrete has a minimum compressive strength of 25 MPa (megapascals) at 28 days of curing.
• M25 is a medium-grade concrete used in structural applications.

• The compressive strength is determined through standard cube tests.

• For M25, the standard cube size is typically 150mm x 150mm x 150mm.

• It is commonly used in residential buildings, pavements, and precast elements.

• M25 concrete mix typically consists of a ratio o
Answered by AI
Add your answer
Q2. What is the significance of the lapping zone in columns?
Ans. 
The lapping zone in columns is crucial for structural integrity and load distribution in reinforced concrete structures.
• Lapping zone refers to the area where two reinforcing bars overlap to ensure continuity.

• It helps in transferring loads effectively between the bars, preventing weak points.

• Proper lapping length is essential to avoid failure; typically, it is 40 times the diameter of the bar.

• In seismic zones, adequate ...read more
Answered by AI
Add your answer
Q3. What is the slump test and its significance in construction?
Ans. 
The slump test measures the consistency and workability of fresh concrete, crucial for construction quality.
• The slump test involves filling a conical mold with concrete and measuring the vertical drop after removing the mold.

• A higher slump indicates more workability, suitable for complex shapes; a lower slump indicates stiffer concrete, ideal for structural elements.

• For example, a slump of 0-25 mm is typical for struct...read more
Answered by AI
Add your answer