AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Process Construction And Technical Services Interview Questions and Answers
Process Construction And Technical Services Interview Experiences
3 interviews found
I applied via Referral and was interviewed before Sep 2023. There was 1 interview round.
(2 Questions)
- Q1. How much can 1 blaster of SA 2.5 Standard work in 8 hours?
- Ans.
On average, 1 blaster of SA 2.5 Standard can cover approximately 600-800 square feet in 8 hours.
1 blaster of SA 2.5 Standard can cover around 600-800 square feet in 8 hours
The coverage may vary based on factors like surface texture, application method, and experience of the painter
For example, a smooth surface may require less material compared to a rough surface
- Q2. How much minimum to maximum profile is required in SA2.5?
- Ans.
The minimum profile required in SA2.5 is 50 microns, while the maximum profile is 85 microns.
Minimum profile required in SA2.5 is 50 microns
Maximum profile allowed in SA2.5 is 85 microns
Profile measurement is crucial for ensuring proper adhesion of coatings
Painting Supervisor Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. Expected salary
Senior Planning Engineer Interview Questions asked at other Companies
I applied via Recruitment Consultant and was interviewed before Jan 2019. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Have you worked before at Offshor?
- Q2. How many years have you worked in offshore?
- Q3. 3 to 4 years.
Interview Preparation Tips
Painting Supervisor Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
I applied via Approached by Company and was interviewed in Dec 2024. There were 7 interview rounds.
Aptitude test explore a person's inclination tendancy or capacity to succeed in a specific situation they are usually made-up of a series of multiple choice question
Group discussion helps employer identify particular personality traits like leadership confidence impersonal and teamwork skills of potential employee
Case study interview isn't you average interview while most interview ask you to give example of how you use your skills on the job in a case study interview
Coding interviews usually conpari se question on software and system desiodesiofor this candidates require analytical and logical thinking to solve problem and scenarios for the One side of virtual interview
A job interview is a task or project related to the position you're applying for .Many hiring Managers use these assignments in addition to traditional interview to learn more about you skills and ethics and evaluate how your abilities algin with the job requirements
(3 Questions)
- Q1. The HR interview includes question such as gernal information about you previous job roles core skillsskills qualifications and salary expectations
- Q2. What's you terubbleshotting process
- Ans.
My troubleshooting process involves identifying the issue, researching possible solutions, testing different approaches, and seeking help if needed.
Identify the problem by gathering information and observing the issue
Research possible solutions by using resources like manuals, online forums, and asking colleagues
Test different approaches to see which one resolves the issue
Seek help from experts or supervisors if unable
- Q3. Do you have any technical certification that Make you qualified for this job
(2 Questions)
- Q1. What technologies are you most proficient and how have you applied them in pas role ?
- Q2. Can you explain a complex technical project that you managed and outcome ?
Interview Preparation Tips
- Effective Communication
Selected
I applied via Referral and was interviewed before Dec 2021. There were 3 interview rounds.
(2 Questions)
- Q1. About Yourself ?
- Q2. Why Resign current job?
- Ans.
Seeking new challenges and opportunities for growth.
Looking for new challenges and opportunities to learn and grow.
Desire for career advancement and professional development.
Seeking a better work-life balance or company culture.
Relocation or personal reasons.
Company restructuring or changes in management.
(5 Questions)
- Q1. What's your job responsibility at current site ?
- Ans.
I am responsible for managing the IT infrastructure, overseeing network security, and leading a team of IT professionals.
Managing IT infrastructure
Overseeing network security
Leading a team of IT professionals
- Q2. Do you know Configure RF devices ?
- Ans.
Yes, configuring RF devices involves setting up and optimizing radio frequency devices for optimal performance.
Configuring RF devices involves adjusting settings such as frequency, power levels, and modulation to ensure proper communication.
Examples of RF devices include routers, access points, and wireless adapters.
Proper configuration of RF devices is essential for reliable wireless communication and network performa
- Q3. What is the needed material for installation and Configure CCTV ?
- Ans.
Materials needed for installing and configuring CCTV include cameras, cables, DVR/NVR, monitor, power supply, and tools.
Cameras (e.g. dome cameras, bullet cameras)
Cables (e.g. coaxial cables, Ethernet cables)
DVR/NVR (Digital Video Recorder/Network Video Recorder)
Monitor (for viewing footage)
Power supply (for cameras and DVR/NVR)
Tools (e.g. drill, screwdriver)
- Q4. Do you have knowledge about firewall devices ?
- Ans.
Yes, I have knowledge about firewall devices.
Firewall devices are used to monitor and control incoming and outgoing network traffic based on predetermined security rules.
They can be hardware-based or software-based.
Examples of firewall devices include Cisco ASA, Palo Alto Networks, and Fortinet.
Firewalls can be configured to block certain types of traffic, such as specific websites or protocols.
They are essential for n...
- Q5. How many types of switches uses in networking for LAN network and CCTV network ?
- Ans.
There are two main types of switches used in networking for LAN network and CCTV network: managed switches and unmanaged switches.
Managed switches offer more control and features, such as VLAN support and Quality of Service (QoS) settings.
Unmanaged switches are simpler and easier to set up, but offer less customization and control.
Examples of managed switches include Cisco Catalyst series and HP ProCurve series.
Example...
(2 Questions)
- Q1. About Your current CTC?
- Q2. Expected CTC
Basic aptitude questions
(1 Question)
- Q1. Mechanical related questions
(1 Question)
- Q1. Tell me about yourself
(2 Questions)
- Q1. Gghhgg yhhh ddf
- Q2. Ghsjsk
Interview Preparation Tips
Electrical Supervisor Interview Questions & Answers
Bahwan Engineering
Anonymous
posted on 23 Jan 2025
Selected
I was interviewed in Dec 2024.
(4 Questions)
- Q1. Procedure about maintenance
- Ans.
Maintenance procedures involve regular inspections, testing, and repairs to ensure equipment functionality and safety.
Regularly schedule maintenance tasks to prevent breakdowns and ensure equipment longevity
Conduct thorough inspections to identify potential issues before they escalate
Keep detailed records of maintenance activities and equipment history
Train staff on proper maintenance procedures and safety protocols
Uti...
- Q2. Knowledge about LOTO
- Q3. Haw to maintain a battery bank
- Ans.
To maintain a battery bank, regular inspections, proper charging, temperature control, and monitoring electrolyte levels are essential.
Perform regular inspections to check for signs of corrosion, leaks, or damage
Ensure proper charging by following manufacturer's guidelines and avoiding overcharging
Control temperature to prevent overheating or freezing, which can reduce battery life
Monitor electrolyte levels and top up ...
- Q4. Asking about ptw
MEP Engineer Interview Questions & Answers
Descon Engineering
6128_ SILAMBARASAN K
posted on 3 Dec 2024
Selected
I applied via Campus Placement and was interviewed in Nov 2024. There was 1 interview round.
(5 Questions)
- Q1. Ducting types youed
- Q2. Ducting any types of material
- Q3. Mep for explain
- Q4. Mep basic form housed property
- Q5. Electrical line
Senior Territory Sales Management Executive Interview Questions & Answers
Walplast Products
Anonymous
posted on 13 Jan 2025
(1 Question)
- Q1. The only way I could do that
(2 Questions)
- Q1. Very cool and very well executed
- Q2. Good luck to all
Interview Preparation Tips
Engineer Trainee Interview Questions & Answers
CTS Consulting & Technical Support
RAMYA PALANIAPPAN
posted on 29 Nov 2024
I applied via Company Website and was interviewed in Oct 2024. There was 1 interview round.
(5 Questions)
- Q1. Introduce yourself
- Q2. What are your strengths
- Q3. Asked about the role
- Q4. Asked about projects
- Q5. Projects related qns
Process Construction And Technical Services Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
Process Construction And Technical Services Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
Process Construction And Technical Services Reviews and Ratings
based on 41 reviews
Rating in categories
|
Piping Engineer
13
salaries
|  ₹1.7 L/yr - ₹7 L/yr |
|
Fireman
10
salaries
| ₹0.9 L/yr - ₹2.5 L/yr |
|
Safety Officer
9
salaries
| ₹2.3 L/yr - ₹5.9 L/yr |
|
Instrument Engineer
8
salaries
| ₹3.6 L/yr - ₹9.1 L/yr |
|
Project Engineer
6
salaries
| ₹2.7 L/yr - ₹10 L/yr |
CTS Consulting & Technical Support
Patel Infrastructure
J K Fenner
Saudi Binladin Group
- Home >
- Interviews >
- Process Construction And Technical Services Interview Questions
