Filter interviews by
Saturated steam is steam that is in equilibrium with liquid water at the same temperature and pressure.
Saturated steam is commonly used in industrial processes for heating and sterilization.
It is often produced by boiling water in a closed vessel, such as a boiler.
Saturated steam has a high heat content and can transfer heat efficiently.
It is important to control the quality of saturated steam to prevent damage to equi...
I have experience in commissioning and operating various types of plants.
I have worked with oil and gas plants, chemical plants, and power plants.
I am familiar with the process of pre-commissioning, commissioning, and start-up of plants.
I have experience in troubleshooting and resolving issues during plant operations.
I am knowledgeable in safety procedures and regulations in plant operations.
I have worked with various ...
Compressor startup procedures involve several steps to ensure safe and efficient operation.
Check oil levels and pressure
Inspect for leaks and damage
Open suction and discharge valves
Start motor and monitor for abnormal vibrations or sounds
Gradually increase speed and monitor pressure and temperature
Close bypass valve once operating conditions are stable
Delta D on steam line can be monitored using differential pressure transmitter.
Install a differential pressure transmitter across the steam line.
Calibrate the transmitter to measure the pressure difference between two points.
Convert the pressure difference to delta D using the known properties of the fluid.
Monitor the delta D reading regularly to detect any changes in the steam line.
Take corrective actions if the delta
I am a trainee at XYZ Company, currently working on various projects under the guidance of senior team members.
Trainee at XYZ Company
Working on various projects
Under the guidance of senior team members
I am a dedicated and hardworking individual with a passion for learning and growth.
I have a strong work ethic and am always eager to take on new challenges.
I am a quick learner and adapt well to new environments.
I am detail-oriented and strive for excellence in everything I do.
I applied via Naukri.com and was interviewed in Oct 2024. There was 1 interview round.
Petrofac interview questions for popular designations
Manpower nhandling only
Get interview-ready with Top Petrofac Interview Questions
Transformers are rated in kVA because it indicates the maximum amount of power that can be safely handled by the transformer.
kVA rating is used to determine the maximum load that a transformer can handle without overheating.
It takes into account both the voltage and current ratings of the transformer.
kVA rating helps in selecting the right size of transformer for a specific application.
For example, a 100 kVA transforme...
MCCB stands for Molded Case Circuit Breaker.
MCCB is a type of circuit breaker that is commonly used in electrical distribution systems.
It provides protection against overcurrent and short circuit faults.
MCCBs have adjustable trip settings for different levels of current protection.
Examples of MCCB manufacturers include Schneider Electric, Siemens, and ABB.
I applied via Company Website and was interviewed in Jun 2023. There were 3 interview rounds.
Graph based question. Duration: 45 mins
Various sensors used in oil and gas industries include pressure sensors, temperature sensors, flow sensors, level sensors, and gas detectors.
Pressure sensors - used to measure pressure in pipelines and equipment.
Temperature sensors - monitor temperature levels in various processes.
Flow sensors - measure the flow rate of liquids or gases in pipelines.
Level sensors - detect the level of liquids in tanks or vessels.
Gas de...
HAZOP stands for Hazard and Operability Study, while HAZID stands for Hazard Identification.
HAZOP is a systematic method to identify potential hazards and operability issues in a process plant.
HAZID is a process used to identify hazards in a facility or operation before they become accidents.
Both HAZOP and HAZID are important tools in risk assessment and management in engineering projects.
P, PI, PID are types of controllers used in process control to regulate the output based on the input.
P stands for Proportional controller, which adjusts the output based on the error signal.
PI stands for Proportional-Integral controller, which not only adjusts based on error signal but also integrates the error over time.
PID stands for Proportional-Integral-Derivative controller, which adjusts based on error signal, i...
Digital Electronics is a branch of electronics that deals with digital signals and systems.
Deals with digital signals (0s and 1s)
Involves logic gates, flip-flops, and digital circuits
Used in computers, calculators, digital watches, etc.
Binary arithmetic and Boolean algebra are fundamental concepts
Level sensor, flow sensor, and temperature sensor are devices used to measure different physical parameters in various industries.
Level sensor measures the level of a substance in a container or tank, such as liquid level sensors in water tanks.
Flow sensor measures the flow rate of a fluid, like a flow meter in a pipeline.
Temperature sensor measures the temperature of a system or environment, for example, a thermocoupl
Saudi Aramco Engineering Standards are guidelines and specifications used in engineering projects for Saudi Aramco.
Saudi Aramco Engineering Standards cover various aspects of engineering design, materials, construction, and operation.
These standards ensure consistency, quality, and safety in all engineering projects undertaken by Saudi Aramco.
Examples of areas covered by the standards include piping design, electrical ...
Safe practices in design involve considering potential hazards, following regulations, and prioritizing safety.
Identify potential hazards in the design process
Follow industry regulations and standards for safety
Prioritize safety over cost or convenience
Regularly review and update safety protocols
Include safety features in the design, such as emergency shut-off valves
Consider environmental impact and sustainability in d
Quality of deliverables is crucial for successful project completion.
Ensuring accuracy and completeness of drawings and documents
Adhering to project specifications and standards
Regularly reviewing and revising deliverables to meet client requirements
Seeking feedback from stakeholders to improve quality
Using software tools effectively to enhance deliverables
Maintaining clear communication with team members for consisten
posted on 9 Jul 2024
I applied via LinkedIn and was interviewed before Jul 2023. There was 1 interview round.
I applied via Walk-in and was interviewed in Jul 2023. There were 3 interview rounds.
Pressure drop criteria for liquid and vapor phases are essential for accurate hydraulic calculations.
Pressure drop criteria for liquid phase typically range from 0.5-2 psi per 100 feet of pipe length.
Pressure drop criteria for vapor phase can vary depending on the specific application and design parameters.
Factors such as flow rate, pipe diameter, fluid properties, and equipment specifications must be considered when d...
Some of the top questions asked at the Petrofac interview -
The duration of Petrofac interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 28 interviews
Interview experience
based on 883 reviews
Rating in categories
Senior Engineer
65
salaries
| ₹0 L/yr - ₹0 L/yr |
Principal Engineer
61
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Design Engineer
49
salaries
| ₹0 L/yr - ₹0 L/yr |
Instrument Engineer
35
salaries
| ₹0 L/yr - ₹0 L/yr |
Process Engineer
33
salaries
| ₹0 L/yr - ₹0 L/yr |
L&T Energy Hydrocarbon
TechnipFMC
McDermott International
Saipem