Filter interviews by
I applied via LinkedIn and was interviewed in Dec 2024. There was 1 interview round.
I applied via campus placement at Rizvi College of Engineering, Mumbai and was interviewed in Jun 2024. There were 3 interview rounds.
Questions on basics of steel structures and on basic reasoning and aptitude. Anyone with basic knowledge of steel structures can clear it.
Detailing involves creating specific drawings and plans based on the design, while designing is the process of creating the initial concept and calculations.
Designing is the process of coming up with the initial concept and calculations for a structure or project.
Detailing involves creating specific drawings, plans, and specifications based on the design.
Designing requires a deep understanding of engineering principles...
Different types of welds include fillet welds, groove welds, plug welds, and slot welds.
Fillet welds are used to join two surfaces at right angles, forming a triangular cross-section.
Groove welds are used to join two pieces of metal that are parallel or nearly parallel.
Plug welds are used to fill a hole on one workpiece with weld metal.
Slot welds are used to join two overlapping pieces of metal by filling a slot with w
Welded connections are generally considered good in steel structures due to their strength and durability.
Welded connections provide high strength and stiffness
They are more durable and require less maintenance compared to bolted connections
Welded connections are more resistant to fatigue and vibration
Examples include fillet welds, groove welds, and plug welds
Steel structures are used in industries due to their strength, durability, and cost-effectiveness.
Steel is a strong material, capable of supporting heavy loads and withstanding harsh environmental conditions.
Steel structures are durable and have a long lifespan, reducing the need for frequent repairs or replacements.
Steel construction is cost-effective compared to other materials, as it is readily available and easy to...
SFD (Shear Force Diagram) and BMD (Bending Moment Diagram) show the variation of shear force and bending moment along the length of a beam.
SFD shows the variation of shear force along the length of a beam.
BMD shows the variation of bending moment along the length of a beam.
SFD and BMD are essential for analyzing the internal forces in a beam.
The point of zero shear force on SFD corresponds to the point of maximum bendi...
I applied via campus placement at Datta Meghe College of Engineering, Mumbai and was interviewed in Jun 2024. There were 3 interview rounds.
Really easy aptitude test based on riddle questions and some of which were technical
I use parameters such as dimensions, materials, connections, and tolerances in major projects.
Dimensions of structural components
Materials used for construction
Types of connections between components
Tolerances for fabrication and assembly
The unit of moment is Newton meter (Nm) or foot-pound (ft-lb).
The unit of moment is a combination of a force and a distance.
In the metric system, moment is measured in Newton meters (Nm).
In the imperial system, moment is measured in foot-pounds (ft-lb).
BSD of I section beam shows the distribution of bending stress along the length of the beam.
BSD is a graphical representation of bending stress distribution in an I section beam.
It helps in understanding how the bending stress varies along the length of the beam.
The diagram typically shows the maximum and minimum bending stress points.
It is important for structural engineers to analyze the BSD to ensure the beam can wi
Calculate the load-bearing capacity of a beam given its dimensions and material properties
Shear force and bending moment diagrams show the variation of internal forces along a structural element.
Shear force diagram shows the variation of shear force along the length of a beam.
Bending moment diagram shows the variation of bending moment along the length of a beam.
Shear force changes sign at point of applied load, while bending moment is zero at point of applied load.
PV Elite is a software used for designing pressure vessels and heat exchangers in the oil and gas industry.
PV Elite is commonly used by civil engineers in the oil and gas industry for designing pressure vessels and heat exchangers.
The software allows engineers to analyze and design pressure vessels according to various international codes and standards.
PV Elite provides tools for designing components such as shells, he...
Water cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
Water cement ratio is a crucial factor in determining the strength and durability of concrete.
A lower water cement ratio results in stronger and more durable concrete.
The ideal water cement ratio varies depending on the type of concrete mix and its intended use.
For example, a water cement ratio of 0.5 is commonly used
The father of mix concrete ratio is Duff Abrams.
Duff Abrams is known as the father of mix concrete ratio.
He developed the Abrams' Law which is used to determine the water-cement ratio in concrete mix design.
Abrams' Law states that the strength of concrete is inversely proportional to the water-cement ratio.
Pan Gulf Technologies interview questions for popular designations
I applied via Company Website and was interviewed in Mar 2024. There were 3 interview rounds.
I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.
I am a BIM Modeller with 5 years of experience in creating detailed 3D models for construction projects.
I have a Bachelor's degree in Architecture
Proficient in using BIM software such as Revit and AutoCAD
Experience in coordinating with architects, engineers, and contractors to ensure accurate models
Strong attention to detail and ability to meet project deadlines
Completed projects include residential, commercial, and in
The Revit Arch tool test assesses the candidate's proficiency in using Revit Architecture software.
Demonstrate knowledge of creating and editing architectural elements in Revit
Show understanding of how to use Revit tools for modeling and documentation
Be able to navigate the Revit interface and work efficiently with the software
Provide examples of past projects where Revit Architecture was used
Revit Str tool test is a test to evaluate a candidate's proficiency in using the Revit Structure tool.
Revit Str tool test evaluates candidate's ability to use Revit Structure tool efficiently
Candidates may be asked to demonstrate their skills in creating structural elements like beams, columns, and slabs
Knowledge of creating structural connections and detailing may also be tested
I applied via Indeed and was interviewed in Jan 2024. There were 2 interview rounds.
Shear force and bending moment diagrams are graphical representations of the internal forces in a structural element.
Shear force diagram shows the variation of shear force along the length of the beam.
Bending moment diagram shows the variation of bending moment along the length of the beam.
Both diagrams are essential for analyzing the structural behavior of a beam under different loading conditions.
posted on 16 Aug 2024
I applied via Recruitment Consulltant and was interviewed in Feb 2024. There was 1 interview round.
I applied via Job Portal
Pv elite is a software used for designing pressure vessels and heat exchangers.
Pv elite is commonly used in the oil and gas industry for designing pressure vessels.
The software allows engineers to analyze and design pressure vessels according to various international codes and standards.
Pv elite includes features for designing heat exchangers, towers, and horizontal vessels as well.
Engineers can input design parameters...
I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 2 interview rounds.
Top trending discussions
The duration of Pan Gulf Technologies interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 14 interviews
Interview experience
based on 130 reviews
Rating in categories
Tekla Modeller
40
salaries
| â‚ą3 L/yr - â‚ą7.5 L/yr |
Detailer
23
salaries
| â‚ą2.6 L/yr - â‚ą5.8 L/yr |
Checker
21
salaries
| â‚ą4.1 L/yr - â‚ą7.9 L/yr |
Team Lead
20
salaries
| â‚ą5 L/yr - â‚ą13 L/yr |
Detailing Engineer
19
salaries
| â‚ą2.7 L/yr - â‚ą4.6 L/yr |
TCS
Infosys
Wipro
HCLTech