Filter interviews by
I applied via Naukri.com and was interviewed in Jun 2022. There were 3 interview rounds.
The least count of a micrometer is the smallest measurement that can be accurately read on the micrometer scale.
The least count is determined by the number of divisions on the micrometer scale and the pitch of the screw.
It is usually expressed in micrometers or millimeters.
For example, if a micrometer has 50 divisions on the scale and the pitch of the screw is 0.5 mm, then the least count would be 0.01 mm (0.5 mm / 50
Vernier least count is the smallest measurement that can be made using a Vernier scale.
Vernier least count is determined by the difference between one main scale division and one Vernier scale division.
It helps in increasing the accuracy of measurements made using a Vernier scale.
For example, if the main scale has divisions of 1 mm and the Vernier scale has divisions of 0.1 mm, the least count would be 0.1 mm.
I applied via Referral and was interviewed before Jan 2022. There were 2 interview rounds.
Musashi Auto Parts interview questions for designations
Top trending discussions
I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.
I applied via Referral and was interviewed before Jun 2022. There were 3 interview rounds.
Use quality tools like Pareto chart, fishbone diagram, and 5 Whys to analyze and address customer complaints.
Identify the root cause of the complaint using tools like fishbone diagram.
Prioritize the issues using a Pareto chart to focus on the most critical problems first.
Use the 5 Whys technique to dig deeper into the root cause of the complaint.
Implement corrective actions based on the analysis to prevent similar comp
I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.
7QC tools are a set of quality control tools used for process improvement and problem-solving.
Check sheet: Used to collect and analyze data, such as tallying defects in a manufacturing process.
Pareto chart: Helps identify the most significant factors contributing to a problem, based on the 80/20 rule.
Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.
Histogram: Repre...
QA focuses on preventing defects in the process, while QC focuses on identifying defects in the product.
QA is process oriented, focusing on preventing defects by improving processes and procedures.
QC is product oriented, focusing on identifying defects through testing and inspection.
QA involves activities like reviews, audits, and process improvements.
QC involves activities like testing, inspections, and quality contro...
FMEA stands for Failure Modes and Effects Analysis, a systematic method for identifying and preventing potential failures in a system.
FMEA is a structured approach to identifying and prioritizing potential failure modes in a system.
It involves analyzing the potential effects of these failures and developing mitigation strategies.
FMEA helps in improving the reliability, safety, and quality of a system or process.
There a...
Process & product audit type of poka yoke ensures errors are prevented during audits.
Poka yoke in process audit involves using checklists to ensure all steps are followed correctly
Poka yoke in product audit involves using sensors to detect defects before they occur
Examples include using color-coded labels to prevent mix-ups in audits
posted on 12 Feb 2024
I applied via Naukri.com and was interviewed before Feb 2023. There was 1 interview round.
The 7 QC tools are a set of problem-solving tools used in quality control and process improvement.
Check sheet: Used to collect and analyze data
Control chart: Monitors process performance over time
Histogram: Visualizes data distribution
Pareto chart: Identifies and prioritizes problems
Cause-and-effect diagram: Identifies root causes of problems
Scatter diagram: Shows relationship between two variables
Flowchart: Illustrate
posted on 1 Apr 2024
I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 2 interview rounds.
Identify root cause, analyze impact, propose solutions, test solutions, implement changes
Identify the root cause of the random problem by analyzing existing parameters
Analyze the impact of the problem on the system or project
Propose potential solutions to address the random problem
Test the proposed solutions to ensure effectiveness
Implement changes based on the tested solutions
Monitor the system to ensure the random pr
When sudden rejection goes higher how you handle situation
based on 7 interviews
1 Interview rounds
based on 137 reviews
Rating in categories
Assistant Engineer
611
salaries
| ₹1.7 L/yr - ₹6 L/yr |
Engineer
167
salaries
| ₹2.8 L/yr - ₹7 L/yr |
Assistant Manager
140
salaries
| ₹6.5 L/yr - ₹14 L/yr |
Senior Engineer
126
salaries
| ₹4 L/yr - ₹11.2 L/yr |
Production Engineer
84
salaries
| ₹2.2 L/yr - ₹7.8 L/yr |
Delphi TVS
Motherson Automotive Technologies and Engineering
Belrise Industries
Krishna Maruti