AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Mott MacDonald Structural Engineer Interview Questions, Process, and Tips
Top Mott MacDonald Structural Engineer Interview Questions and Answers
- Q1. In which direction will you add bracing in steel structure? and why?
- Q2. What type of structures have you worked upon?
- Q3. What are different check in footing?
Mott MacDonald Structural Engineer Interview Experiences
2 interviews found
Anonymous
(1 Question)
- Q1. LOD stages in BIM
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Oct 2023. There were 2 interview rounds.
(5 Questions)
- Q1. In which direction will you add bracing in steel structure? and why?
- Ans.
Bracing should be added in the weak axis direction to provide stability and prevent buckling.
Bracing should be added in the weak axis direction to prevent buckling.
Bracing helps to stabilize the structure and distribute loads more efficiently.
Examples of bracing in steel structures include diagonal bracing, cross bracing, and portal bracing.
- Q2. What are different check in footing?
- Ans.
Different checks in footing include bearing capacity check, settlement check, sliding check, and overturning check.
Bearing capacity check ensures the soil can support the load without failure.
Settlement check ensures the footing settles within acceptable limits.
Sliding check ensures the footing does not slide on the soil.
Overturning check ensures the footing does not overturn due to lateral forces.
- Q3. One way shear and two way shear in footing explain
- Ans.
One way shear occurs in footings when load is applied in one direction, while two way shear occurs when load is applied in two directions.
One way shear typically occurs in rectangular footings where the load is applied in one direction.
Two way shear occurs in square footings or when the load is applied in two directions.
One way shear is calculated using the formula Vc = 0.5 * f'c * b * d, while two way shear is calcula
- Q4. What type of structures have you worked upon?
- Ans.
I have worked on various types of structures including commercial buildings, residential homes, bridges, and industrial facilities.
Commercial buildings
Residential homes
Bridges
Industrial facilities
- Q5. Why do you want to switch?
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
Selected
I applied via LinkedIn and was interviewed in Sep 2024. There were 2 interview rounds.
(2 Questions)
- Q1. SFD and BMD diagrams
- Q2. Moment and shear connection in steel structures
- Ans.
Moment and shear connections are critical in steel structures for transferring loads between members.
Moment connections transfer bending forces between beams and columns
Shear connections transfer shear forces between beams and columns
Common types of moment connections include bolted end plate connections and welded connections
Common types of shear connections include bolted shear tabs and welded shear plates
(2 Questions)
- Q1. Structural detailing
- Q2. Base shear calculation
(2 Questions)
- Q1. Basic Questions direct from book, this company mainly focused on book, you have to know Is codes and reasons behind every clause like, at the beam support why minimum striups spacing is 6d . You have to k...
- Q2. How moment is transfer from beam to column, In I section what is the main work of web Check points for. Designing of beam column sab foundation What is dynamic analysis Difference between fundamental tim...
- Ans.
Structural Engineer interview questions on moment transfer, I section web work, beam-column-slab foundation design, dynamic analysis, bending theory, neutral axis, balanced section, etc.
Moment transfer from beam to column
Web work in I section
Designing of beam-column-slab foundation
Dynamic analysis
Difference between fundamental time period and natural time period of building
Base shear
Moment connection
PMM ratio curve
Theo...
Interview Preparation Tips
Love you all and all the best
This is not final
Life is great
Think big
And one day you will be succeed
And always Help other and be Kind to every
Interview Questionnaire
1 Question
- Q1. Analysis of frames
- Ans.
Analysis of frames involves determining the internal forces and stresses in the members of a structural frame.
Frames are analyzed using structural analysis methods such as the method of joints or method of sections.
Internal forces such as axial, shear, and bending moments are calculated for each member.
Stresses are then determined using the material properties and cross-sectional area of each member.
Frame analysis is i...
Skills evaluated in this interview
Selected
I applied via LinkedIn and was interviewed in Sep 2024. There were 2 interview rounds.
(2 Questions)
- Q1. SFD and BMD diagrams
- Q2. Moment and shear connection in steel structures
- Ans.
Moment and shear connections are critical in steel structures for transferring loads between members.
Moment connections transfer bending forces between beams and columns
Shear connections transfer shear forces between beams and columns
Common types of moment connections include bolted end plate connections and welded connections
Common types of shear connections include bolted shear tabs and welded shear plates
(2 Questions)
- Q1. Structural detailing
- Q2. Base shear calculation
I applied via Walk-in and was interviewed before May 2023. There was 1 interview round.
(3 Questions)
- Q1. What is pile foundation
- Ans.
Pile foundation is a type of deep foundation that is used to transfer loads from a structure to a stronger layer of soil or rock deep below the surface.
Pile foundations are used when shallow foundations are not feasible due to weak soil conditions or high structural loads.
Piles are long, slender columns made of materials such as concrete, steel, or timber that are driven into the ground.
There are different types of pil...
- Q2. Type of foundation
- Ans.
The type of foundation for structural steel detailing can vary depending on the specific project requirements and site conditions.
Common types of foundations for structural steel include spread footings, mat foundations, and pile foundations.
The choice of foundation type is influenced by factors such as soil conditions, building loads, and local building codes.
For example, in areas with poor soil conditions, deep found...
- Q3. How can set scale in autocad.
- Ans.
To set scale in AutoCAD, use the 'SCALE' command and specify the reference length and new length.
Open AutoCAD and select the objects you want to scale.
Type 'SCALE' in the command line and press Enter.
Select the base point for scaling and then specify the reference length.
Enter the new length that you want to scale the objects to.
Press Enter to apply the scale.
For example, to scale an object to double its size, specify ...
Interview Preparation Tips
(2 Questions)
- Q1. Basic Questions direct from book, this company mainly focused on book, you have to know Is codes and reasons behind every clause like, at the beam support why minimum striups spacing is 6d . You have to k...
- Q2. How moment is transfer from beam to column, In I section what is the main work of web Check points for. Designing of beam column sab foundation What is dynamic analysis Difference between fundamental tim...
- Ans.
Structural Engineer interview questions on moment transfer, I section web work, beam-column-slab foundation design, dynamic analysis, bending theory, neutral axis, balanced section, etc.
Moment transfer from beam to column
Web work in I section
Designing of beam-column-slab foundation
Dynamic analysis
Difference between fundamental time period and natural time period of building
Base shear
Moment connection
PMM ratio curve
Theo...
Interview Preparation Tips
Love you all and all the best
This is not final
Life is great
Think big
And one day you will be succeed
And always Help other and be Kind to every
Interview Questionnaire
1 Question
- Q1. Analysis of frames
- Ans.
Analysis of frames involves determining the internal forces and stresses in the members of a structural frame.
Frames are analyzed using structural analysis methods such as the method of joints or method of sections.
Internal forces such as axial, shear, and bending moments are calculated for each member.
Stresses are then determined using the material properties and cross-sectional area of each member.
Frame analysis is i...
Skills evaluated in this interview
Mott MacDonald Interview FAQs
Tell us how to improve this page.
Mott MacDonald Interviews By Designations
- Mott MacDonald Financial Analyst Interview Questions
- Mott MacDonald Electrical Engineer Interview Questions
- Mott MacDonald Bridge Engineer Interview Questions
- Mott MacDonald EHS Officer Interview Questions
- Mott MacDonald Structural Engineer Interview Questions
- Mott MacDonald Accountant Interview Questions
- Mott MacDonald BIM Modeller Interview Questions
- Mott MacDonald Civil QS Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Civil Structural Engineer Interview Questions
- Senior Structural Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Junior Structural Engineer Interview Questions
- Senior Structural Design Engineer Interview Questions
- Civil Structural Designer Interview Questions
- Structural Engineer Trainee Interview Questions
- Structural Steel Detailer Interview Questions
- Show more
Mott MacDonald Structural Engineer Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
Mott MacDonald Structural Engineer Reviews and Ratings
based on 9 reviews
Rating in categories
|
Mechanical Engineer
52
salaries
|  ₹5.3 L/yr - ₹15 L/yr |
|
Consultant
37
salaries
| ₹5.4 L/yr - ₹10.6 L/yr |
|
IT Analyst
36
salaries
| ₹4.7 L/yr - ₹18 L/yr |
|
Senior Consultant
34
salaries
| ₹7.2 L/yr - ₹15.5 L/yr |
|
Electrical Engineer
33
salaries
| ₹5.2 L/yr - ₹14.5 L/yr |
AECOM
Jacobs Engineering Group
WSP
Arup
- Home >
- Interviews >
- Mott MacDonald Interview Questions >
- Mott MacDonald Structural Engineer Interview Questions
