AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Samvardhana Motherson Group Assistant Engineer Interview Questions and Answers
Samvardhana Motherson Group Assistant Engineer Interview Experiences
3 interviews found
Anonymous
I applied via Campus Placement and was interviewed in Oct 2020. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. What are you doing
- Q2. What you earn your life
- Ans.
I earn my life by working as an Assistant Engineer.
I earn my life by working in the field of engineering.
I am employed as an Assistant Engineer and receive a salary for my work.
My earnings come from the projects I work on and the services I provide as an Assistant Engineer.
Interview Preparation Tips
I applied via Campus Placement and was interviewed before May 2021. There was 1 interview round.
(2 Questions)
- Q1. How the working culture of mssl
- Ans.
The working culture at MSSL is collaborative, innovative, and focused on continuous improvement.
MSSL encourages teamwork and open communication among employees.
The company values creativity and encourages employees to think outside the box.
Continuous learning and development opportunities are provided to employees.
MSSL has a strong focus on quality and customer satisfaction.
The company promotes a healthy work-life bala
- Q2. Mssl working experience is good.. all are systematic work.. good communication. Team work..
Interview Preparation Tips
Interview Questionnaire
2 Questions
- Q1. What is the use of combination set?
- Ans.
A combination set is a tool used for measuring and marking angles, distances, and depths accurately.
Combination sets are commonly used in engineering and construction.
They typically include a protractor, ruler, and depth gauge.
The protractor is used to measure and mark angles.
The ruler is used to measure and mark distances.
The depth gauge is used to measure and mark depths.
Combination sets are versatile and can be used...
- Q2. How many types of CNC controls units?
- Ans.
There are several types of CNC control units used in engineering.
There are three main types of CNC control units: open-loop, closed-loop, and computer numerical control (CNC).
Open-loop control units are the simplest and least expensive, but they do not provide feedback on the actual position of the machine.
Closed-loop control units use feedback sensors to continuously monitor and adjust the position of the machine, res...
Interview Preparation Tips
Experience: I have answered all the questions sucessfully....
Tips: confidentely
Interview questions from similar companies
Interview Preparation Tips
Experience: My CGPA was 9.08/10 . The initial shortlisting was done on the basis of Resume/CGPA
Round: Test
Experience: There was an online core test across all mechanical department.
Duration: 2 Hours minutes
Round: Group Discussion
Experience: There was no Group Discussion.
Round: Group Activity
Experience: There was no Group Activity.
Round: Interview
Experience: In this round my knowledge and the skills from the projects which i did , were tested. They were asked in detail.
Round: Interview
Experience: There was no HR round
Skill Tips: I had done algorithm development in my intern which matched their job profile. Interviewer
openly stated my Maths Olympiad achievement as the reason I was there. Also , a significant amount of my BTP work and intern work helped me getting the job.
College Name: IIT-Madras
Interview Questionnaire
6 Questions
- Q1. 1)Tell me about yourself
- Ans.
I am a highly motivated and experienced professional with a passion for leadership and team development.
I have over 5 years of experience in management roles
I excel at creating and implementing strategies to improve team performance
I am skilled in communication, problem-solving, and decision-making
I am dedicated to continuous learning and development
I am excited about the opportunity to bring my skills and experience t
- Q2. 2) Why Bosch?
- Ans.
Bosch is a global leader in technology and innovation, with a strong commitment to sustainability and employee development.
Bosch's reputation for quality and innovation is unmatched in the industry
The company's commitment to sustainability aligns with my personal values
Bosch offers excellent opportunities for career growth and development
I am impressed by the company's focus on employee well-being and work-life balance
- Q3. 3) Why should i hire you?
- Ans.
I have the necessary skills, experience, and passion to excel in this role.
I have X years of experience in management and have consistently exceeded targets.
I have strong communication and leadership skills, which have helped me motivate and guide teams to success.
I am passionate about the industry and am always looking for ways to improve processes and drive growth.
I am a quick learner and am always eager to take on n...
- Q4. 4) Strengths and Weakness?
- Ans.
My strengths include leadership, problem-solving, and communication. My weakness is that I tend to be too detail-oriented.
Strengths: Leadership - I have experience leading teams and delegating tasks effectively. Problem-solving - I am able to analyze situations and come up with creative solutions. Communication - I am able to clearly convey ideas and instructions to others.
Weakness: Detail-oriented - While attention to...
- Q5. 5) What will you do if a member of a group doesn't work?
- Ans.
I will address the issue with the member and try to find out the reason for their lack of work and provide support if needed.
Have a one-on-one conversation with the member to understand their situation
Identify any obstacles or challenges they may be facing and offer support or resources to help them overcome it
Set clear expectations and goals for the group and hold everyone accountable
Consider involving higher manageme
- Q6. 6) What if your boss doesn't help u?
- Ans.
I would try to find alternative solutions and resources to complete the task at hand.
I would first try to communicate with my boss and express my concerns.
If that doesn't work, I would try to seek help from other colleagues or departments.
I would also try to research and find resources online or in books to help me complete the task.
If all else fails, I would try to break down the task into smaller manageable parts and...
Interview Preparation Tips
Experience: The initial shortlisting was done on CGPA and a test. I had 7.64/10 as my CGPA.
Round: Group Discussion
Experience: There was no Group Discussion.
Round: Test
Experience: It was an online test.
Test1: 1hr Test2: 30min
Round: Group Activity
Experience: There was no group activity.
Round: HR Interview
Tips: Be confident in the HR round.
Round: Technical Interview
Tips: Be perfect on the projects and intern described in the resume.
General Tips: SoM, IC engines, Heat Transfer, Thermodynamics, Mantech, TurboMachinery are to be focused upon.
1) Quant Skills : Speed and accuracy.
2) GD prep : conducted GD among ur friends and classmates
3) Interview : Be confident and cool.
4) Resume : Keep it to 1 page and prepare well.
Skill Tips: I think I got selected because of my confidence and my performance in both the rounds. Also, projects related to manufacturing sector will help u in the interview.
Test1: CAT preparation is sufficient.
Test2: GATE book, notes and slides from mechanical google site(created by sumit patil)
HR prep: Get to know about the various type of HR questions(many files in LAN)
Notes and slides from mechanical google site (created by sumit patil) helped a lot
College Name: IIT Madras
Interview Preparation Tips
Experience: There was a test based shortlisting. The test was objective had two sections. The first section had 60 aptitude questions which were very easy and the time was 60 minutes. The second section was technical(core) which had 30 questions which needed to be answered in 30 minutes.
This sections had 3-4 questions from important topics like Strength of Materials, Fluid Mech, Man Tech, KDOMS ,DOME, etc
Duration: 90 minutes
Round: Interview
Experience: The company wanted to acquire members for Manufacturing and R&D. The interviewer asked me basic questions in Man Tech like different types of Manufacturing (conventional and non-conventional). As I told him that I was interested in automobiles, he asked me about the engine and its parts, their materials, etc. A CAD drawing was shown to me to test the basic symbols like roughness parameters, etc.
Round: Interview
Experience: It was like a normal HR round with nothing radical. Basic preparation to questions like tell me about yourself, biggest achievement, strengths,weakness, etc is enough. Confidence is another important aspect they were looking for.
General Tips: Started my preparation in October but never really took off until November. It may help immensely to start early because as placements draw close, it may be tough to find time to study decently owing to tests and ppts. Also, I didn't prepare for non-core companies, but wrote the tests to improve my experience and speed in quant.
Skill Tips: Brushed up basics of all mechanical courses and prepared for HR questions. It is better to target certain companies,prepare according to each, rather than going for every company that appears on the portal. I prepared from GATE book which covers almost all topics. The lectures from placement preparation website also helped. The aptitude questions were very easy and basic quant preparation is sufficient. As I didn't write CAT, had to adjust to the time limit in the written tests. It is better to practice quant papers for improving the speed. GATE book and placement preparation website were sufficient for core fundaes. Had GDs with wingmates.
College Name: IIT Madras
Interview Preparation Tips
Experience: There were three rounds.The first was a general interview that was mainly to brief the resume.
Tips: It helps if they find something interesting in your resume that fits their profile, like a project,skill or internship.
Round: Interview
Experience: Questions were mainly centered on man tech, IC engines, conventional and non-conventional mfg procedures, 2/4 stroke engines, etc
Skill Tips: ""
College Name: IIT Madras
Interview Questionnaire
6 Questions
- Q1. Tell me about Yourself?
- Ans.
I am a highly motivated and organized individual with experience in management and customer service.
I have worked in various management roles, including as a supervisor at a retail store and as a team leader at a call center.
I am skilled in problem-solving and conflict resolution, having dealt with difficult customers and employees in the past.
I am also proficient in Microsoft Office and have experience with scheduling...
- Q2. Why Bosch?
- Ans.
Bosch is a leading global technology and services company with a strong focus on innovation and sustainability.
Bosch has a reputation for quality and reliability in its products and services.
The company invests heavily in research and development to stay ahead of the curve.
Bosch has a strong commitment to sustainability and social responsibility.
The company offers opportunities for growth and career development.
Bosch h
- Q3. Why should i hire you?
- Ans.
I have the necessary skills, experience, and passion to excel in this role.
I have experience in managing teams and achieving targets.
I am skilled in problem-solving and decision-making.
I have a passion for customer service and ensuring customer satisfaction.
I am a quick learner and adaptable to new situations.
I am a team player and can work collaboratively with others.
I am committed to achieving success and contributin
- Q4. Strengths and Weakness?
- Ans.
My strength is my ability to lead and motivate a team. My weakness is that I can be too detail-oriented at times.
Strength: Strong leadership and motivational skills
Strength: Ability to delegate tasks effectively
Weakness: Tendency to be too detail-oriented
Weakness: Sometimes struggle with time management
- Q5. What will you do if a member of a group doesn't work?
- Ans.
I will address the issue with the individual and the group, and take appropriate action based on the situation.
Speak with the individual privately to understand the reason for their lack of work
Discuss the issue with the group to ensure everyone is aware of their responsibilities
Provide support or resources to help the individual improve their performance
Take disciplinary action if necessary, such as a verbal warning o...
- Q6. What if your boss doesn't help u?
- Ans.
I would try to find alternative solutions and resources to complete the task at hand.
Communicate with colleagues or other departments for assistance
Research and gather information to solve the problem independently
Take initiative and make decisions to move forward
Document the situation and bring it to the attention of higher management if necessary
Interview Preparation Tips
Experience: There was an Online Aptitude+Tech test.
Tips: Mug up important formulae , even the big ones in DOME as most of them were direct formula based questions (which kinda sucks) ...!!!
Duration: 90 min minutes
Round: Group Discussion
Experience: There was no Group Discussion
Round: Group Activity
Experience: There was no group activity ...
Round: Interview
Experience: There was nothing particularly different .
Round: Interview
Experience: Interview lasted for 50 minutes. I was grilled on the two internships that I had done during last two summers. And about 15 minutes of grilling on a self study course -CNC Machining just because I happened to be the class rep. There was a single guy questioning and not a panel which is good in some ways. He asked me if I had good quantitative skills. I replied yes. And then he asked a lot of math puzzles. Nothing too tough.
Tips: Just go through placement materials. Make sure you have a core resume for and you are thorough with everything you have written. Be prepared for anything. Learn the basics of important topic and practice some online core tests.SoM, IC engines, Heat Transfer, Thermodynamics, Mantech, TurboMachinery should be prepared properly . And also, be perfect on the projects and intern described in the resume.
General Tips: I started preparing for placements from October mid. Starting earlier always helps you. I did not prepare for non-core companies. Quant and Verbal through CAT preparation(improve your speed and accuracy) , Core from GATE book, notes, slides (according to the company profile) , Conducted around 7 wing GDs (get to know the mistakes) , helped me a lot in the whole placement preparation process.
Skill Tips: I think I was selected because of my performance in both the rounds. Throughout both the interviews they were more concerned about leading and managing people. In my case my PORs helped me, to answer those questions by giving suitable examples and confident answers. They also looked for manufacturing profile. So projects related to manufacturing sector will help you in the interview.
Skills: Leadership skills, Managing people.
College Name: IIT-Madras
Interview Questionnaire
5 Questions
- Q1. What are your strengths, weaknesses..?
- Ans.
My strengths include leadership, problem-solving, and communication. My weaknesses are time management and public speaking.
Strengths: Leadership - I have experience leading teams and delegating tasks. Problem-solving - I am able to think critically and find solutions to complex problems. Communication - I am able to effectively communicate with team members and clients.
Weaknesses: Time management - I sometimes struggle...
- Q2. What irritates you most..?
- Ans.
Inefficiency and lack of communication irritate me the most.
Inefficiency in completing tasks
Lack of communication within the team
Not being able to meet deadlines due to lack of planning
Unnecessary delays in decision-making
Micromanagement
Lack of clarity in instructions
- Q3. What do you do in such situations..?
- Ans.
I assess the situation, gather information, and make a decision based on company policies and procedures.
Assess the situation and determine the severity of the issue
Gather information from all parties involved
Refer to company policies and procedures for guidance
Make a decision based on the information gathered and company guidelines
Communicate the decision to all parties involved
- Q4. Are you a leader or a follower...?
- Ans.
I am a leader who can also follow when necessary.
I believe in leading by example and inspiring others to follow.
I am comfortable taking charge and making decisions, but also value input from others.
I am adaptable and can switch between leading and following depending on the situation.
For example, in a team project, I would take the lead in organizing and delegating tasks, but also listen to and incorporate ideas from t...
- Q5. Which one is good
Interview Preparation Tips
Experience: I have a CGPA 7.38.
Round: Test
Experience: There was an online objective test
Tips: Previous year IIT Gate book is the best thing to prepare for the technical test for any company. I started doing it in October only.
Duration: 80 min minutes
Round: Interview
Experience: There were two rounds of interview ; 30min for Tech and 10 min HR.
Tips: If you are in ED they will test your basic design skills. They showed a CAD drawing and asking the meaning of symbols, then they asked questions related to general designs available in our surroundings like why is that sewage hole round on the ground why not square or others. If you are in Mechanical, they will ask u core Mech subjects. So please first prepare very well subjects related to your respective interns. A whole interview can be drawn on that. In my case it was IC engine so I answered all the questions related to it and that didn't allow them to ask in any other topic.
Round: Interview
Experience: It was gen. All HR rounds just want to test how much positive you are in life, whether you will leave the company soon.
Tips: Be prepared with answers beforehand. The answers to all the above questions should be "depends on the
situation" and describe them in which situation u will choose which one. PS: if it’s a panel where HR is also there, they will try to excite you by asking gen questions like which team you support in IPL, do u have any gf etc. to make you lite, then again shoot you with some questions. Please don’t get deviated by those.
Skill Tips: Mock tests, Aimcats, Gate book. For GDs, we organised them in our wing. It was very helpful.
Kindly do it often in your wing and among your batch mates too. Same goes for interview. There
are lots of general interview questions available on FTP server, prepare for them well and have
mock interviews. "Alumni interviews" were very helpful, please attend that. Randstad sessions were an absolutely waste of money and time. I was mainly selected due to my internship with Bosch. Prepare all subjects related to your intern. It will be the game changer.
College Name: IIT Madras
Interview Preparation Tips
Experience: CGPA cut-off: 7. The test had two parts. The level of the questions in the first part was very easy and do not require GRE or CAT skills. It had questions on verbal ability (readinc comprehension and vocabulary) and Math (time- work problems, arithmetic, percentages etc). The second part had questions related to Mechanical Engineering. It was slightly tough having a wide range of questions from Kinematics, design of machine elements, fluids , and thermodynamics .However, one can easily crack the test.
Tips: Don’t leave the questions unaswered as there is no negative marking.
Round: Interview
Experience: Around 60 students were shortlisted for the interview .There was only one round of interview which had both HR and technical questions. The interviewers were very friendly. The interview went on for approximately forty minutes. They started by asking me about my hometown, family, interests etc. Few question were: “Tell me about yourself”, “Describe your hometown”, “Why do u want to join Bosch and what do you know about it”, “Why won’t you go for MS or PhD”. The rest of the interview process was about the projects and internships and a few basic concepts of Mechanical Engineering. Each student was asked questions from different topics depending on the projects he was involved in. Basic questions I was asked : “What is casting”, “What is forming”, “How is a gear manufactured”, “What is the profile oF the gears used and why”. Apart from these, afew things about CRDi technology were asked.
Tips: Being a part of technology events in the hall will help a lot during the interview process. Google about ABS, CRDi, bearings, gears etc and study the “Thermodynamic cycles” from any thermodynamics book before the interview. Be confident.Never create an impression that you are a research orientated guy and will be going for MS or PhD. Do not panic. Do not try to bluff - they are experienced people and will find it out. Prepare very thoroughly about the projects. Learn about recent developments in the automobile sector (any technology developed by Bosch). Always smile .
General Tips: Having a CGPA>8 will enhance your chances. In mechanical, almost all the students who got selected had a CGPA of around 8.5. Mine was 8.4. However, Class X and Class XII percentages do not matter.
Internships in automobile industries definitely help. My sophomore intern was at Tata Motors Ltd. which caught the interviewer’s attention. The interview was guided by the project done by me at Tata Motors. Having a few academic projects also helps. Generally, they ask about projects mentioned in the CV. So, it’s better to be prepared about any project you may have done. Knowledge of the auto-sector is a must. Learn about recent developments in this sector.
College Name: IIT KHARAGPUR
Samvardhana Motherson Group Interview FAQs
Tell us how to improve this page.
Samvardhana Motherson Group Interviews By Designations
- Samvardhana Motherson Group Quality Engineer Interview Questions
- Samvardhana Motherson Group Production Engineer Interview Questions
- Samvardhana Motherson Group Engineer Interview Questions
- Samvardhana Motherson Group Senior Engineer Interview Questions
- Samvardhana Motherson Group Graduate Engineer Trainee (Get) Interview Questions
- Samvardhana Motherson Group Assistant Manager Interview Questions
- Samvardhana Motherson Group Design Engineer Interview Questions
- Samvardhana Motherson Group Computer Operator Interview Questions
- Show more
Interview Questions for Popular Designations
- Assistant Manager Interview Questions
- Assistant Manager Maintenance Interview Questions
- Assistant Electrical Engineer Interview Questions
- Assistant Manager Quality Interview Questions
- Assistant Manager - Production Interview Questions
- Assistant Engineer Production Interview Questions
- Assistant Manager Quality Assurance Interview Questions
- Assistant Professor Interview Questions
- Show more
Samvardhana Motherson Group Assistant Engineer Interview Process
based on 1 interview
Interview experience
Assistant Engineer Interview Questions from Similar Companies
Fast track your campus placements
Samvardhana Motherson Group Assistant Engineer Reviews and Ratings
based on 218 reviews
Rating in categories
|
Assistant Engineer
854
salaries
|  ₹1.1 L/yr - ₹5.4 L/yr |
|
Engineer
650
salaries
| ₹1.8 L/yr - ₹7 L/yr |
|
Assistant Manager
538
salaries
| ₹4 L/yr - ₹13.8 L/yr |
|
Senior Engineer
481
salaries
| ₹2.9 L/yr - ₹9 L/yr |
|
Production Engineer
466
salaries
| ₹1.1 L/yr - ₹5.8 L/yr |
Bosch
JBM Group
MRF Tyres
Ceat Tyres
- Home >
- Interviews >
- Samvardhana Motherson Group Interview Questions >
- Samvardhana Motherson Group Assistant Engineer Interview Questions
