Filter interviews by
I applied via Recruitment Consulltant and was interviewed before Jan 2024. There were 2 interview rounds.
Self introduction,BD process,pm process, Document mantain,spare mantain,
I applied via Newspaper Ad and was interviewed in Mar 2023. There were 2 interview rounds.
The number of departments in a company varies depending on its size and structure.
The number of departments can range from a few to dozens or even hundreds.
Common departments in a company include finance, human resources, marketing, operations, and IT.
The number of departments may also depend on the industry and specific needs of the organization.
Large companies may have separate departments for different product lines...
I appeared for an interview in Oct 2022.
Maintenance activities involve the regular inspection, repair, and upkeep of equipment and facilities to ensure their optimal functioning.
Maintenance activities include preventive maintenance, corrective maintenance, and predictive maintenance.
Preventive maintenance involves scheduled inspections and maintenance tasks to prevent equipment breakdowns.
Corrective maintenance involves repairing equipment after a breakdown ...
I applied via Campus Placement and was interviewed in Aug 2021. There were 3 interview rounds.
A 4-stroke engine is a type of internal combustion engine that completes four separate strokes (intake, compression, power, exhaust) in two crankshaft revolutions.
4-stroke engines are commonly used in cars, motorcycles, and other vehicles.
They are more fuel efficient and produce less emissions compared to 2-stroke engines.
Examples of 4-stroke engines include the engines found in most modern cars and motorcycles.
Transfer refers to the movement of something from one place to another.
Transfer can involve the movement of physical objects, data, or energy.
Examples of transfer include transferring files from one computer to another, transferring heat from a hot object to a cooler one, and transferring goods from one location to another.
In maintenance engineering, transfer may refer to moving equipment or materials from one location
Three-phase motors are commonly used in industrial applications due to their efficiency and power output.
Three-phase motors have three sets of windings that are spaced 120 degrees apart.
They are more efficient and have a higher power output compared to single-phase motors.
Examples of three-phase motors include induction motors, synchronous motors, and brushless DC motors.
Transfer refers to the movement of something from one place to another.
Transfer can involve the movement of physical objects, data, energy, or even people.
Examples of transfer include transferring files from one computer to another, transferring heat from a hot object to a cooler one, and transferring patients from one hospital to another.
Samvardhana Motherson Group interview questions for designations
Top trending discussions
I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.
I applied via Approached by Company and was interviewed before Nov 2021. There were 4 interview rounds.
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
I applied via Company Website and was interviewed in May 2019. There were 4 interview rounds.
There are several types of valves in instrumentation.
Gate valve
Ball valve
Butterfly valve
Globe valve
Check valve
Diaphragm valve
Needle valve
Plug valve
Pressure relief valve
Safety valve
PT, LT and LVDT are types of sensors used in engineering for measuring pressure, temperature and displacement respectively.
PT stands for Pressure Transducer and is used to measure pressure in various applications such as hydraulic systems, engines, and pipelines.
LT stands for Linear Transducer and is used to measure temperature in various applications such as engines, HVAC systems, and industrial processes.
LVDT stands ...
Calibration of I/P converter involves adjusting the output pressure to match the input signal.
Connect the I/P converter to a pressure source and a signal generator
Adjust the input signal to the desired value
Measure the output pressure and adjust it to match the input signal
Repeat the process at different input signal levels to ensure accuracy
Document the calibration results for future reference
A load cell is a transducer that converts force into an electrical signal. Calibration involves applying known loads and adjusting the output signal.
Load cell measures force or weight
It converts the force into an electrical signal
Calibration involves applying known loads and adjusting the output signal
Calibration can be done using a calibration machine or weights
Calibration should be done regularly to ensure accurate r
I appeared for an interview before Jul 2016.
My areas of interest include electrical systems, mechanical systems, and preventive maintenance.
Electrical systems: I have a strong interest in troubleshooting and repairing electrical systems, such as motors, control panels, and wiring.
Mechanical systems: I enjoy working with mechanical components, such as pumps, valves, and conveyors. I have experience in maintaining and repairing these systems.
Preventive maintenance...
I applied via Campus Placement and was interviewed before Nov 2020. There were 5 interview rounds.
A strain gauge is a device used to measure strain or deformation in an object.
It consists of a thin wire or foil that is attached to the object being measured.
As the object deforms, the wire or foil also deforms, causing a change in its electrical resistance.
This change in resistance is measured and used to calculate the amount of strain or deformation in the object.
Strain gauges are commonly used in engineering and ma...
Different types of gears include spur gears, helical gears, bevel gears, worm gears, and rack and pinion gears.
Spur gears have straight teeth and are the simplest and most common type of gear.
Helical gears have angled teeth and provide smoother and quieter operation compared to spur gears.
Bevel gears have cone-shaped teeth and are used to transmit power between intersecting shafts.
Worm gears consist of a worm and a wor...
My favorite subject is mechanical engineering, as it combines creativity with technical skills to solve real-world problems.
Mechanical engineering principles help in designing efficient systems, like HVAC for buildings.
I enjoy learning about thermodynamics, which is crucial for understanding energy systems.
Hands-on projects, such as building a small engine, enhance my practical skills and understanding.
Studying materia...
Pumps are selected based on the required flow rate, head, and fluid properties.
Determine the required flow rate and head for the application
Consider the fluid properties such as viscosity, temperature, and corrosiveness
Select a pump type that is suitable for the application, such as centrifugal, positive displacement, or axial flow
Choose a pump material that is compatible with the fluid being pumped
Consider the operati...
Boilers are classified based on their design, fuel type, and application.
Fire-tube boilers
Water-tube boilers
Electric boilers
Gas boilers
Oil boilers
Solid fuel boilers
Combination boilers
Condensing boilers
Industrial boilers
Residential boilers
Threads are helical ridges or grooves on the surface of a cylindrical object. There are different types of threads.
Unified Thread Standard (UTS)
Metric Thread Standard
Pipe Thread Standard
ACME Thread
Buttress Thread
Knuckle Thread
Square Thread
Round Thread
Valves are devices used to control the flow of fluids or gases. There are several types of valves used in different applications.
Gate valve
Ball valve
Butterfly valve
Globe valve
Check valve
Diaphragm valve
Needle valve
Pressure relief valve
Safety valve
DCV stands for Directional Control Valve in hydraulics which controls the direction of fluid flow.
DCV is used to control the direction of fluid flow in hydraulic systems.
It is a type of valve that directs the flow of fluid to different parts of the system.
DCV can be manually operated or automated depending on the application.
Examples of DCV include spool valves, poppet valves, and rotary valves.
DCV is an important comp...
based on 6 interviews
2 Interview rounds
based on 31 reviews
Rating in categories
Assistant Engineer
972
salaries
| ₹1 L/yr - ₹5.1 L/yr |
Engineer
646
salaries
| ₹1.8 L/yr - ₹7 L/yr |
Assistant Manager
579
salaries
| ₹4 L/yr - ₹13.8 L/yr |
Production Engineer
485
salaries
| ₹1.1 L/yr - ₹6 L/yr |
Senior Engineer
483
salaries
| ₹2.8 L/yr - ₹9 L/yr |
Bosch
JBM Group
MRF Tyres
Ceat Tyres