Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 3 interview rounds.
Aptitude test and IQ test and mathamets questions
I applied via Recruitment Consulltant
I applied via Company Website and was interviewed in Mar 2022. There were 3 interview rounds.
Curing machine problem analyzing
Identify the specific problem with the curing machine
Check for any error codes or warning messages
Inspect the machine for any physical damage or wear and tear
Review the machine's maintenance and repair history
Consult with other maintenance engineers or experts in the field
Curing press problem analysis
Installation and Commissioning completion
I applied via campus placement at Loyola College, Chennai and was interviewed before May 2023. There were 2 interview rounds.
Types of pumps include centrifugal, reciprocating, and rotary pumps. Turbines include steam, gas, and hydraulic turbines.
Centrifugal pumps use centrifugal force to move fluid through the pump
Reciprocating pumps use a piston or diaphragm to create pressure
Rotary pumps use rotating mechanisms to move fluid
Steam turbines use steam to generate mechanical energy
Gas turbines use combustion gases to generate mechanical energy
...
Quantitative and analtical aptitude
MRF Tyres interview questions for designations
I applied via Recruitment Consultant and was interviewed in Dec 2021. There were 3 interview rounds.
Hydraulic pressure is measured in bar and NAC is not a commonly used term in this context.
Hydraulic pressure is typically measured in bar or psi
The amount of pressure required depends on the specific system and application
NAC is not a commonly used term in the context of hydraulic systems
Get interview-ready with Top MRF Tyres Interview Questions
I applied via Approached by Company and was interviewed before Nov 2021. There were 4 interview rounds.
I applied via Campus Placement and was interviewed before Nov 2020. There were 5 interview rounds.
A P-V diagram of a double stage air compressor shows the pressure-volume relationship during compression.
The diagram consists of two stages of compression.
The first stage compresses the air from atmospheric pressure to an intermediate pressure.
The second stage compresses the air from the intermediate pressure to the final pressure.
The volume decreases as the pressure increases during compression.
The diagram can be used...
A strain gauge is a device used to measure strain or deformation in an object.
It consists of a thin wire or foil that is attached to the object being measured.
As the object deforms, the wire or foil also deforms, causing a change in its electrical resistance.
This change in resistance is measured and used to calculate the amount of strain or deformation in the object.
Strain gauges are commonly used in engineering and ma...
Bearings are used to reduce friction between two moving parts. There are different types of bearings.
Plain bearings
Rolling element bearings
Jewel bearings
Fluid bearings
Magnetic bearings
Different types of gears include spur gears, helical gears, bevel gears, worm gears, and rack and pinion gears.
Spur gears have straight teeth and are the simplest and most common type of gear.
Helical gears have angled teeth and provide smoother and quieter operation compared to spur gears.
Bevel gears have cone-shaped teeth and are used to transmit power between intersecting shafts.
Worm gears consist of a worm and a wor...
Pumps are selected based on the required flow rate, head, and fluid properties.
Determine the required flow rate and head for the application
Consider the fluid properties such as viscosity, temperature, and corrosiveness
Select a pump type that is suitable for the application, such as centrifugal, positive displacement, or axial flow
Choose a pump material that is compatible with the fluid being pumped
Consider the operati...
Boilers are classified based on their design, fuel type, and application.
Fire-tube boilers
Water-tube boilers
Electric boilers
Gas boilers
Oil boilers
Solid fuel boilers
Combination boilers
Condensing boilers
Industrial boilers
Residential boilers
Threads are helical ridges or grooves on the surface of a cylindrical object. There are different types of threads.
Unified Thread Standard (UTS)
Metric Thread Standard
Pipe Thread Standard
ACME Thread
Buttress Thread
Knuckle Thread
Square Thread
Round Thread
Valves are devices used to control the flow of fluids or gases. There are several types of valves used in different applications.
Gate valve
Ball valve
Butterfly valve
Globe valve
Check valve
Diaphragm valve
Needle valve
Pressure relief valve
Safety valve
DCV stands for Directional Control Valve in hydraulics which controls the direction of fluid flow.
DCV is used to control the direction of fluid flow in hydraulic systems.
It is a type of valve that directs the flow of fluid to different parts of the system.
DCV can be manually operated or automated depending on the application.
Examples of DCV include spool valves, poppet valves, and rotary valves.
DCV is an important comp...
I was interviewed before Jul 2016.
My areas of interest include electrical systems, mechanical systems, and preventive maintenance.
Electrical systems: I have a strong interest in troubleshooting and repairing electrical systems, such as motors, control panels, and wiring.
Mechanical systems: I enjoy working with mechanical components, such as pumps, valves, and conveyors. I have experience in maintaining and repairing these systems.
Preventive maintenance...
Top trending discussions
I was interviewed in Aug 2024.
A mechanical engineer is a professional who designs, develops, and maintains mechanical systems and machinery.
Designing and analyzing mechanical systems
Developing prototypes and testing them for efficiency
Maintaining and troubleshooting mechanical equipment
Collaborating with other engineers and professionals on projects
The motor is a device that converts electrical energy into mechanical energy to power machinery or equipment.
Motors can be found in various applications such as industrial machinery, household appliances, and vehicles.
There are different types of motors including AC motors, DC motors, and servo motors.
Motors consist of a rotor, stator, and various components such as coils, magnets, and brushes.
Common examples of motors...
There are two main types of motors: AC motors and DC motors.
AC motors: Alternating current motors that are commonly used in household appliances and industrial applications.
DC motors: Direct current motors that are often used in battery-operated devices and automotive applications.
A turbine is a machine that converts the energy in a fluid flow into mechanical energy.
Turbines are commonly used in power plants to generate electricity.
There are different types of turbines such as steam turbines, gas turbines, and wind turbines.
Turbines have blades that rotate when the fluid flow passes through them, causing a shaft to spin and generate power.
The Bering is a strait that separates Russia and Alaska.
The Bering Strait is a narrow passage of water connecting the Arctic Ocean to the Bering Sea.
It separates the easternmost point of Asia from the westernmost point of North America.
Named after the explorer Vitus Bering who first documented it in 1728.
The mechanism in a hydraulic press is the system of components that allows for the transmission of force through a fluid to generate a large amount of pressure.
Hydraulic press uses a hydraulic cylinder to generate force.
The force is transmitted through a fluid, typically oil or water.
The mechanism includes valves, pumps, and pistons to control the flow of the fluid and generate pressure.
The pressure created by the mech...
Forging is a manufacturing process involving the shaping of metal using localized compressive forces.
Heating the metal to a high temperature to make it more malleable
Applying compressive forces to shape the metal into the desired form
Cooling the forged metal to strengthen it
Types of forging include open-die forging, closed-die forging, and seamless rolled ring forging
based on 2 interviews
3 Interview rounds
based on 22 reviews
Rating in categories
Production Supervisor
531
salaries
| ₹1.8 L/yr - ₹5.5 L/yr |
Junior Officer
378
salaries
| ₹2.8 L/yr - ₹6 L/yr |
Territory Sales Supervisor
308
salaries
| ₹4.3 L/yr - ₹8 L/yr |
Production Officer
240
salaries
| ₹3 L/yr - ₹6.6 L/yr |
Operation Assistant
239
salaries
| ₹2.8 L/yr - ₹4.7 L/yr |
Apollo Tyres
Ceat Tyres
Balkrishna Industries
JK Tyres