Upload Button Icon Add office photos

Filter interviews by

Motherson Automotive Technologies and Engineering Assistant Engineer Interview Questions and Answers

Updated 18 Mar 2025

Motherson Automotive Technologies and Engineering Assistant Engineer Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. Working relationships
  • Q2. Personal interview
Interview experience
3
Average
Difficulty level
-
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the root cause of burn mark
  • Ans. 

    The root cause of burn marks can vary depending on the context, but common causes include heat exposure, electrical currents, chemical reactions, and friction.

    • Heat exposure: Direct contact with hot objects or surfaces can cause burn marks.

    • Electrical currents: Electric shocks or faulty electrical equipment can result in burn marks.

    • Chemical reactions: Contact with corrosive substances or strong acids can lead to burn mar...

  • Answered by AI
  • Q2. Why using double ejection in injection molds
  • Ans. 

    Double ejection is used in injection molds to improve part ejection and reduce cycle time.

    • Double ejection helps in ejecting complex parts with undercuts or threads.

    • It reduces the risk of part damage during ejection.

    • By ejecting the part from both sides simultaneously, it speeds up the overall cycle time.

    • Double ejection can prevent the need for manual intervention in part removal.

    • It is commonly used in industries like au

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't panic and what you know tell openly . Don't tell lie .To Improve the trouble shooting product online issue

Assistant Engineer Interview Questions Asked at Other Companies

Q1. How do we take slump for casting of concrete and what if when we ... read more
asked in Randstad
Q2. 1.Define the term capacitance & inductance 2.what is Rectifie ... read more
Q3. What is the 5s.and how is the important of a industry??
Q4. Why do we take only 1 set of cube sample at a casting of concrete ... read more
asked in TCE
Q5. What are the provisions you check for, designing a beam/column ac ... read more
Interview experience
5
Excellent
Difficulty level
-
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Previous company role
  • Q2. Solve any problem releted with mfg assembly fitments
  • Q3. What is 7 QC tools ?
  • Ans. 

    The 7 QC tools are a set of problem-solving tools used in quality control and process improvement.

    • Check sheet: Used to collect and analyze data

    • Control chart: Monitors process performance over time

    • Histogram: Visualizes data distribution

    • Pareto chart: Identifies and prioritizes problems

    • Cause-and-effect diagram: Identifies root causes of problems

    • Scatter diagram: Shows relationship between two variables

    • Flowchart: Illustrate

  • Answered by AI
  • Q4. Can i relocate?

Interview Preparation Tips

Interview preparation tips for other job seekers - No so hard

Interview questions from similar companies

I applied via Referral and was interviewed in Aug 2018. There were 2 interview rounds.

Interview Preparation Tips

Round: Resume Shortlist
Experience: By skill specialist & interview call;regarding knowledge of domain.

General Tips: Krishna maruti group is very excellent place of working.big group..many plants..zero tension of job security..means a viable place to do long service.no late sitting..
Culture is greater govt.than central govt offices.
Negative is higher mismatch between ctc & in hand.
10% of basic they deduct for superannuation fund from AM level..which is unaccountable.
Avg..1000rs deduction for lunch mandatory for bad canteen good & uniform deduction.
I means to say ,anybody should discuss only in hand salary during interview.means a monthly ctc of 60k became 45k & avg 4.5k will never receive(lunch/uniform/s.a.)
Duration: <1 week
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Press shop related. About process of components. Work instruction.
Round 3 - HR 

(1 Question)

  • Q1. About previous company environment.salary expectation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Best environment in the company. Skh provide

Best salary.

I applied via Recruitment Consulltant and was interviewed in Dec 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Project related questions Previous learning from projects Any new technology used in previous projects. Coat saving projects.
  • Q2. 1. Why you want to change? 2. Have you interview us before?
  • Q3. Related to profile either weld engineering or press engineering.

Interview Preparation Tips

Interview preparation tips for other job seekers - You should be very confident about your answers .
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Write NC program PFMEA details and knowledge of depth to proportion GD&T Past company experience and technical knowledge, cast reduction, process knowledge
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical round 2. Interviewed by ME head. Capacity calculation,line balancing,PPAP,APQP,MSD,machine selaction, process selection.

Interview Preparation Tips

Interview preparation tips for other job seekers - I you have too technical knowledge you will get the job definitely.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Problem and route cause

Round 3 - One-on-one 

(1 Question)

  • Q1. Process and risk assessment
Round 4 - Technical 

(1 Question)

  • Q1. Quality tools and assurance activities

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong with what you have put in your resume
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself?
  • Q2. Parameters of costing?
  • Ans. 

    Parameters of costing refer to the factors that influence the cost of a product or service.

    • Parameters can include materials, labor, overhead, and profit margin.

    • Other factors like transportation costs, taxes, and market demand can also impact costing.

    • Understanding and analyzing these parameters is crucial for accurate pricing and cost control.

    • For example, in manufacturing, the cost of raw materials and labor are key par

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please make your CV effective & to the point. Don't put any irrelevant thing which you don't know.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is Tolerance Mode
  • Ans. 

    Tolerance Mode is a feature in some electronic devices that allows for a certain level of deviation or error without triggering an alarm or shutdown.

    • Tolerance Mode is commonly used in industrial settings to prevent unnecessary shutdowns due to minor fluctuations in readings.

    • It can be set to allow for a specific range of values before taking action.

    • For example, a temperature sensor in a manufacturing plant may be set to...

  • Answered by AI
  • Q2. How to Overcome from Temp.
  • Ans. 

    To overcome from temporary setbacks, it is important to stay positive, seek support, set goals, and take action.

    • Stay positive and maintain a growth mindset

    • Seek support from friends, family, or a mentor

    • Set specific, achievable goals to work towards

    • Take action by creating a plan and following through with it

  • Answered by AI

Motherson Automotive Technologies and Engineering Interview FAQs

How many rounds are there in Motherson Automotive Technologies and Engineering Assistant Engineer interview?
Motherson Automotive Technologies and Engineering interview process usually has 1-2 rounds. The most common rounds in the Motherson Automotive Technologies and Engineering interview process are Technical and Resume Shortlist.
How to prepare for Motherson Automotive Technologies and Engineering Assistant Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Motherson Automotive Technologies and Engineering. The most common topics and skills that interviewers at Motherson Automotive Technologies and Engineering expect are Cipet, Injection Moulding, Maintenance, Breakdown Maintenance and Leadership Skills.
What are the top questions asked in Motherson Automotive Technologies and Engineering Assistant Engineer interview?

Some of the top questions asked at the Motherson Automotive Technologies and Engineering Assistant Engineer interview -

  1. Why using double ejection in injection mo...read more
  2. What is the root cause of burn m...read more
  3. What is 7 QC tool...read more

Tell us how to improve this page.

Motherson Automotive Technologies and Engineering Assistant Engineer Interview Process

based on 4 interviews

Interview experience

4.3
  
Good
View more
9% less than the average Assistant Engineer Salary in India
View more details

Motherson Automotive Technologies and Engineering Assistant Engineer Reviews and Ratings

based on 63 reviews

4.0/5

Rating in categories

4.0

Skill development

3.6

Work-life balance

3.3

Salary

4.4

Job security

3.7

Company culture

3.1

Promotions

3.8

Work satisfaction

Explore 63 Reviews and Ratings
Engineer
361 salaries
unlock blur

₹2 L/yr - ₹7 L/yr

Assistant Engineer
277 salaries
unlock blur

₹1.5 L/yr - ₹5.4 L/yr

Senior Engineer
263 salaries
unlock blur

₹3.6 L/yr - ₹10.5 L/yr

Assistant Manager
241 salaries
unlock blur

₹4.8 L/yr - ₹14 L/yr

Trainee Technician
240 salaries
unlock blur

₹1.4 L/yr - ₹3.6 L/yr

Explore more salaries
Compare Motherson Automotive Technologies and Engineering with

Delphi TVS

3.9
Compare

Belrise Industries

3.8
Compare

Krishna Maruti

4.0
Compare

Faurecia

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview