i
M3M India
Filter interviews by
The weight of 12 mm ply as per IS code varies depending on the type of wood used.
The weight of 12 mm ply can range from 22 to 30 kg per sheet.
The weight can also vary based on the density of the wood used.
IS code may specify a range of acceptable weights for 12 mm ply.
The weight of steel varies depending on the type and dimensions of the steel.
The weight of steel is typically measured in pounds or kilograms.
The weight of steel can range from 7.85 g/cm³ for mild steel to 8.05 g/cm³ for high-strength steel.
The weight of a specific piece of steel can be calculated by multiplying its volume by its density.
I applied via LinkedIn and was interviewed before Apr 2023. There were 2 interview rounds.
The diameter of steel refers to the width of a steel rod or pipe, while the weight of steel is determined by its density and volume.
The diameter of steel is typically measured in inches or millimeters.
The weight of steel can be calculated using the formula: weight = volume x density.
For example, a steel rod with a diameter of 1 inch and a length of 1 foot will have a certain weight based on its density.
Mortar ratio and grade of concrete are crucial factors in construction projects.
Mortar ratio refers to the proportion of cement, sand, and water in mortar mix.
Grade of concrete indicates the strength of the concrete mix.
Common mortar ratios include 1:3 (cement:sand) for general masonry work and 1:1 (cement:sand) for plastering.
Concrete grades range from M10 to M80, with higher grades indicating higher strength.
Proper s...
I applied via Recruitment Consulltant and was interviewed before Aug 2021. There were 3 interview rounds.
I completed various projects during my Bachelor's degree, including a design project for a new bridge and a research project on renewable energy.
Designed a new bridge using CAD software
Researched and implemented renewable energy sources on campus
Collaborated with classmates on a group project to improve campus sustainability
I completed my 6 months internship at ABC Engineering Firm, where I gained hands-on experience in project management and design.
Internship at ABC Engineering Firm
Focused on project management and design
Hands-on experience gained
I applied via Naukri.com and was interviewed in May 2023. There were 3 interview rounds.
Project refers to a specific task with a defined start and end, while project engineering involves the technical aspects of planning, designing, and executing the project.
Project is the overall task or objective to be completed within a specific timeframe.
Project engineering focuses on the technical aspects such as planning, designing, and executing the project.
Project management involves coordinating resources and tas...
Types of services in interior fitout include design, construction, project management, and installation.
Design services involve creating layouts, selecting materials, and creating 3D visualizations.
Construction services include building partitions, ceilings, and flooring.
Project management services involve coordinating schedules, budgets, and contractors.
Installation services include fitting furniture, fixtures, and eq...
Some common problems faced on site include delays in material delivery, inclement weather, and coordination issues.
Delays in material delivery can impact project timelines and budgets
Inclement weather can halt work progress and cause safety concerns
Coordination issues between different teams can lead to misunderstandings and errors
Agreement is a mutual understanding between parties, while a bond is a legal document that ensures fulfillment of obligations.
Agreement is a mutual understanding between two or more parties.
A bond is a legal document that guarantees the fulfillment of obligations.
Agreements are usually informal and may not always be legally binding.
Bonds are formal and legally enforceable documents.
Examples of agreements include contra...
I applied via Company Website and was interviewed in Feb 2023. There were 2 interview rounds.
The coefficient of cement is a measure of its ability to expand or contract due to changes in temperature or moisture.
The coefficient of cement is also known as the coefficient of thermal expansion.
It is an important factor to consider in construction projects to prevent cracking or damage to structures.
The coefficient of cement varies depending on the type and composition of the cement.
For example, Portland cement typ...
Escalation of materials refers to the process of increasing the priority or urgency of obtaining necessary materials for a project.
Escalation may occur when there are delays in the delivery of materials or when the demand for materials exceeds the supply.
Project managers may escalate materials by contacting suppliers to expedite delivery or by seeking alternative sources for the materials.
Escalation can impact project ...
I applied via Company Website and was interviewed before Jan 2023. There was 1 interview round.
Chiller efficiency is a measure of how well a chiller unit is able to cool a space while using the least amount of energy.
Chiller efficiency is typically measured by the Coefficient of Performance (COP), which is the ratio of cooling output to energy input.
Regular maintenance and cleaning of chiller components can improve efficiency.
Upgrading to a more energy-efficient chiller model can also increase efficiency.
Proper ...
Water cooled systems are generally more efficient than air cooled systems due to higher heat transfer capabilities.
Water has higher heat transfer capabilities compared to air
Water cooled systems can maintain more consistent temperatures
Water cooled systems are typically used in high performance applications such as data centers and industrial machinery
Duct velocity can be improved by increasing the fan speed or reducing the duct size.
Increase the fan speed to increase the air velocity in the duct.
Reduce the duct size to increase the air velocity.
Use dampers or adjustable louvers to control and optimize the airflow.
Ensure proper sealing of duct joints to minimize air leakage.
Consider using smooth and straight ducts to reduce friction and improve airflow.
Regularly cle...
The chiller system uses various types of gases for cooling purposes.
Common types of gases used in chiller systems include R-134a, R-410A, and ammonia.
R-134a is a hydrofluorocarbon (HFC) refrigerant commonly used in air conditioning systems.
R-410A is a blend of hydrofluorocarbons used as a replacement for older refrigerants.
Ammonia (NH3) is often used in industrial chiller systems due to its high cooling capacity.
Other ...
The VRF system capacity is determined based on the area's cooling and heating load requirements.
Calculate the total cooling load and heating load for the area
Consider factors such as insulation, windows, occupancy, and equipment
Select VRF system capacity based on the calculated load requirements
Consult with HVAC professionals for accurate sizing
I applied via Company Website and was interviewed in May 2021. There was 1 interview round.
I applied via Referral and was interviewed in Jul 2023. There were 2 interview rounds.
based on 4 interviews
Interview experience
based on 3 reviews
Rating in categories
Assistant Manager
165
salaries
| ₹4.2 L/yr - ₹12.1 L/yr |
Deputy Manager
90
salaries
| ₹5 L/yr - ₹13.5 L/yr |
Manager
82
salaries
| ₹5.5 L/yr - ₹21.5 L/yr |
Senior Manager
78
salaries
| ₹6.5 L/yr - ₹25 L/yr |
Senior Executive
58
salaries
| ₹3.5 L/yr - ₹9 L/yr |
Knight Frank
R.S. Infraprojects
SMEC
BPTP