Filter interviews by
Clear (1)
I applied via Campus Placement and was interviewed in Dec 2022. There were 3 interview rounds.
Quantative aptitude, reasoning, comprehensive English
I applied via Campus Placement and was interviewed before Jan 2024. There were 3 interview rounds.
Can be found on yt. Available on yt
I applied via Referral and was interviewed before Feb 2023. There were 2 interview rounds.
Aptitude and technical
Bolt connection design involves selecting appropriate bolt size, material, and tightening torque to ensure proper joint behavior.
Consider factors like load, environment, and material compatibility when designing bolt connections.
Properly calculate bolt size and length to ensure sufficient strength and prevent failure.
Select appropriate bolt material based on factors like corrosion resistance and strength requirements.
U...
I applied via Campus Placement and was interviewed before Feb 2022. There were 4 interview rounds.
National level online exam conducted on campus
Importance of time management in professional life
Time management helps in achieving goals and meeting deadlines
It reduces stress and increases productivity
Prioritizing tasks and avoiding procrastination is key
Effective time management leads to better work-life balance
Examples: scheduling meetings, setting reminders, delegating tasks
L&T Construction interview questions for designations
I applied via Campus Placement and was interviewed in Jun 2021. There were 3 interview rounds.
I applied via Campus Placement and was interviewed before Nov 2020. There were 3 interview rounds.
Designing an industrial roof shed involves considering factors such as the type of industry, location, weather conditions, and materials.
Determine the type of industry and its requirements
Consider the location and weather conditions
Choose appropriate materials for the roof and support structure
Ensure proper ventilation and lighting
Design for safety and accessibility
Consider future expansion or modifications
Top trending discussions
posted on 4 Feb 2024
I applied via Referral and was interviewed in Aug 2023. There was 1 interview round.
The yield strength of 8mm dia steel of 550 grade can be found using standard testing methods.
Yield strength is the maximum stress a material can withstand without permanent deformation
Standard testing methods like tensile testing can be used to determine the yield strength
The 550 grade refers to the minimum yield strength of the steel
Consulting the material's specification or conducting tests can provide the exact yiel
Bleeding and segregation are phenomena that occur in concrete during its placement and curing process.
Bleeding is the process of water rising to the surface of freshly placed concrete due to the settlement of solid particles.
Segregation refers to the separation of coarse aggregates from the rest of the concrete mix, resulting in an uneven distribution of materials.
Bleeding can lead to a weakened surface layer and reduc...
The design mix ratios of concrete mixes vary depending on the specific requirements and applications.
Design mix ratios are determined based on factors such as strength, workability, durability, and environmental conditions.
Common design mix ratios include 1:2:4 (cement:sand:aggregate) for general construction, 1:1.5:3 for reinforced concrete, and 1:0.5:1 for high-strength concrete.
Different types of concrete mixes, suc...
Shear force and bending moment diagrams are graphical representations of the internal forces and moments in a structural element.
Shear force diagram shows the variation of shear force along the length of the element.
Bending moment diagram shows the variation of bending moment along the length of the element.
Shear force and bending moment diagrams are commonly used in structural analysis and design.
These diagrams help e...
posted on 12 Nov 2020
I applied via Company Website and was interviewed in May 2020. There were 3 interview rounds.
MPLS is a protocol used for efficient packet forwarding. It uses labels to identify paths instead of IP addresses.
MPLS stands for Multiprotocol Label Switching
Labels are assigned to packets at the ingress router
Labels are used to identify the path a packet should take through the network
Labels are swapped at each MPLS router along the path
The last MPLS router removes the label and forwards the packet based on the IP ad...
Route reflector is a BGP feature that allows a router to advertise routes to its clients without requiring full mesh connectivity.
Route reflector reduces the number of iBGP peerings required in a network.
It helps in scaling the network by reducing the number of updates and processing required.
Route reflector can be configured in a hierarchical manner to further reduce the number of iBGP peerings.
It is commonly used in ...
posted on 21 Mar 2023
I applied via Referral and was interviewed in Feb 2023. There were 2 interview rounds.
I applied via Walk-in and was interviewed before Dec 2020. There were 5 interview rounds.
The neutral axis is the line where the stress is zero in a reinforced concrete structure.
The neutral axis divides the cross-section of the structure into two parts: the compression zone and the tension zone.
The depth of the neutral axis depends on the moment of resistance of the section and the bending moment applied.
The position of the neutral axis affects the amount of reinforcement required in the tension zone.
The n...
based on 4 interviews
3 Interview rounds
based on 3 reviews
Rating in categories
Assistant Manager
1.1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
703
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Construction Manager
504
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Site Engineer
393
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineering Manager
323
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Projects
Shapoorji Pallonji Group
Hindustan Construction Company
GAMMON INDIA