AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Kia Motors Technician Interview Questions and Answers
Kia Motors Technician Interview Experiences
1 interview found
I applied via campus placement at Kuvempu University, Karnataka and was interviewed in Dec 2021. There were 2 interview rounds.
(4 Questions)
- Q1. Turbo charger And SuperCharger
- Q2. What is the ratio of petrol
- Ans.
The ratio of petrol refers to the proportion of petrol in a mixture or fuel.
The ratio of petrol is typically expressed as a fraction or percentage.
For example, a fuel mixture with a petrol ratio of 1:4 means that for every 1 part of petrol, there are 4 parts of other components.
The petrol ratio can vary depending on the specific fuel blend or application.
It is important to maintain the correct petrol ratio for optimal ...
- Q3. Difference between CRDI And MPFI
- Ans.
CRDI and MPFI are fuel injection systems used in automobiles. CRDI is used in diesel engines while MPFI is used in petrol engines.
CRDI stands for Common Rail Direct Injection and MPFI stands for Multi-Point Fuel Injection.
CRDI injects fuel directly into the engine cylinder while MPFI injects fuel into the intake manifold.
CRDI is more efficient and provides better fuel economy than MPFI.
CRDI is used in diesel engines wh...
- Q4. How to work TDC to BDC
- Ans.
To work TDC to BDC, rotate the crankshaft until the piston is at top dead center (TDC) and then rotate it in the direction of engine rotation until it reaches bottom dead center (BDC).
Locate the timing marks on the crankshaft pulley and the timing cover
Rotate the crankshaft until the timing mark on the pulley aligns with the TDC mark on the cover
Rotate the crankshaft in the direction of engine rotation until the timing...
Interview Preparation Tips
- Mechanical technician
Don’t limit yourself to online application to during your job search
Remember that your resume
Top trending discussions
Interview questions from similar companies
Surya Kushwaha
Selected
I was interviewed in Dec 2024.
(3 Questions)
- Q1. What should be done if the air conditioning unit is not cooling and water is overflowing?
- Ans.
Check for clogged air filters, condensate drain line, and refrigerant levels. Call a professional if needed.
Check air filters for clogs and replace if necessary
Inspect condensate drain line for blockages and clear if needed
Check refrigerant levels and call a professional if low
Ensure the thermostat is set correctly and the unit is not overheating
- Q2. Ac wire lose
- Ans.
Ac wire feet protectly
- Q3. Ac gas lik Ac gas use
- Ans.
AC gas is used in air conditioning systems to cool the air inside a building or vehicle.
AC gas is a refrigerant that absorbs heat from the air inside the system and releases it outside.
Common AC gases include R-410A, R-22, and R-134a.
AC gas leaks can lead to decreased cooling efficiency and potential harm to the environment.
Regular maintenance and proper handling of AC gas are important for optimal performance.
(2 Questions)
- Q1. Ac feet ac change ac repair Ac gas lok
- Q2. Ac service
(2 Questions)
- Q1. Ac gas use ac feet
- Ans.
The question is unclear and seems to be asking about the usage of AC gas in terms of feet.
AC gas is typically measured in pounds or kilograms, not feet.
The amount of AC gas used depends on the size of the AC unit and any leaks in the system.
It is important to have a professional technician handle AC gas refills to prevent damage to the unit.
Regular maintenance of the AC unit can help prevent leaks and reduce the need f
- Q2. Ac gas use
- Ans.
AC gas is used to cool the air in air conditioning systems.
AC gas is a refrigerant used in air conditioning systems to absorb and release heat.
Common types of AC gas include R-410A, R-22, and R-134a.
AC gas should only be handled by trained technicians to prevent leaks and environmental damage.
(2 Questions)
- Q1. Ac feet ac gas use
- Ans.
The question is asking about the use of AC gas in air conditioning units.
AC gas is used in air conditioning units to cool the air that is circulated throughout a building.
The amount of AC gas used depends on the size of the unit and the frequency of use.
Regular maintenance of AC units can help ensure efficient use of AC gas.
- Q2. Ac change ac repair
(2 Questions)
- Q1. Ac feet ac gas use
- Ans.
The question is asking about the use of AC gas in air conditioning units.
AC gas is used in air conditioning units to cool the air that is circulated throughout a building.
The amount of AC gas used depends on the size of the unit and the frequency of use.
Regular maintenance of AC units can help ensure efficient use of AC gas.
- Q2. Ac service ac change
(2 Questions)
- Q1. Ac repair ac gas use
- Ans.
AC repair involves checking and refilling AC gas to ensure proper functioning.
AC repair technicians check for leaks in the AC system before refilling gas.
The type of gas used depends on the specific AC unit and its requirements.
Properly refilling AC gas can improve cooling efficiency and extend the lifespan of the unit.
- Q2. Ac frrt
Any hou I will do sir
I can do work in company
Any how i do work in company maruti suzuki
Study and read polectly riting good also
I am do work profectly
I do work hardly I am do all work so I do work
Study and read writing
Nice good night friends
I am mechanical so do gime work ac technician any problem sir
Selected
I applied via Newspaper Ad and was interviewed in Aug 2023. There were 5 interview rounds.
(6 Questions)
- Q1. Iam completely diploma mechanical engineering
- Ans.
iam looking the Toyota company in andhara pradesh
- Q2. My dream mechanical
- Q3. Cars all parts touching hord mechanic
- Q4. Air filter ac filter brackpads engine oil filling
- Ans.
frist pepping in all safety itams
- Q5. Weels testing engine and power testing
- Q6. I love my cars mechanical engineering
(2 Questions)
- Q1. Big mnc company in Toyota
- Q2. Number of the company in Toyota
(7 Questions)
- Q1. Mostly best company in Toyota
- Q2. Best careers company in Toyota
- Q3. Toyota company or all employees lifelong well-done settled in Toyota
- Q4. Employee safety
- Q5. Toyota cars good brand in international
- Q6. Best company in Toyota
- Q7. Iam looking Toyota company
(1 Question)
- Q1. Best lunch big company in Toyota international
Interview Preparation Tips
I applied via Campus Placement and was interviewed in May 2024. There was 1 interview round.
(1 Question)
- Q1. Tcf auto mantnance
Technician Interview Questions & Answers
Hyundai Motor India Limited
Anonymous
posted on 11 Mar 2023
Selected
I applied via AmbitionBox and was interviewed in Feb 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Which is company, and what timing to reach
- Q2. What salary pacage in what duty hour
- Ans.
The salary package for a Technician varies depending on the duty hours.
The salary package may be based on an hourly rate or a fixed monthly salary.
The duty hours can range from part-time to full-time employment.
Different industries and companies may offer different salary packages for Technicians.
Some companies may provide additional benefits such as health insurance or retirement plans.
Examples: A Technician working f...
Interview Preparation Tips
(3 Questions)
- Q1. Engine Overheating problem
- Ans.
Engine overheating can be caused by various factors such as coolant leaks, radiator issues, or a malfunctioning thermostat.
Check for coolant leaks in the system
Inspect the radiator for any blockages or damage
Test the thermostat to ensure it is functioning properly
Verify the condition of the water pump
Ensure proper airflow through the radiator by checking the cooling fan
Consider the possibility of a blown head gasket
- Q2. What reason ,Engine not starting
- Ans.
Possible reasons for an engine not starting
Faulty ignition system
Fuel delivery issues
Battery or starter motor problems
Faulty sensors or computer system
Mechanical issues like a seized engine
- Q3. Engine excessive exaust smoke
- Ans. Lubricant consume, not properly fuel burning due to clogged air filter, clogged fuel injector.
How to deal your customer on your duty period
Interview Preparation Tips
I applied via Walk-in and was interviewed before Sep 2021. There were 4 interview rounds.
Mathematics prectise
Eglish test with barain test
Pepar work with group
(1 Question)
- Q1. Regard my qualifications
Interview Preparation Tips
- Family information
But need to improve regard response
I applied via Campus Placement and was interviewed before Apr 2017. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. If your job is confirmed in TOYOTA are you ready to work in any department any group first question
- Ans.
Yes, I am ready to work in any department or group at TOYOTA.
I am adaptable and willing to learn new skills.
I have experience working in various departments in my previous roles.
I believe in the importance of cross-functional collaboration for overall success.
I am excited about the opportunity to gain a diverse range of experiences at TOYOTA.
- Q2. Y do you prefer this company
- Ans.
I prefer this company because of its strong commitment to employee development and innovative approach to education.
Strong commitment to employee development through training programs
Innovative approach to education with cutting-edge technology
Positive company culture that values collaboration and growth opportunities
Interview Preparation Tips
I boosted myself and finally selected for the company TOYOTA.
WHERE THERE IS A WILL THERE IS A WAY ADOPTED THIS THEORY.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-4 weeks
College Name: TOYOTA TECHININCAL TRAINING INSTITUTE
I applied via LinkedIn
(3 Questions)
- Q1. What is the current
- Q2. What is the capacitor
- Ans.
A capacitor is an electronic component that stores and releases electrical energy in a circuit.
Capacitors are used to filter out noise in electronic circuits.
They can also be used to store energy in flash cameras.
Capacitors are measured in Farads (F).
- Q3. What is the transform
- Ans.
A transform is a function that converts data from one form to another.
Transforms are commonly used in signal processing to convert signals from one domain to another (e.g. time domain to frequency domain)
In mathematics, a transform is a function that maps a set of values into another set of values
Examples of transforms include Fourier transform, Laplace transform, and wavelet transform
(2 Questions)
- Q1. What is the semiconductor
- Ans.
A semiconductor is a material that has electrical conductivity between a conductor and an insulator, commonly used in electronic devices.
Semiconductors have a conductivity between that of a conductor and an insulator
They are commonly used in electronic devices such as transistors and diodes
Examples of semiconductors include silicon, germanium, and gallium arsenide
- Q2. What is the investors
- Ans.
Investors are individuals or organizations that provide capital to businesses in exchange for ownership stake or profit.
Investors can be individuals, venture capital firms, private equity firms, or angel investors.
They provide funding to businesses in exchange for equity ownership or a share of profits.
Investors can also provide expertise, guidance, and networking opportunities to help the business grow.
Examples of inv...
Skills evaluated in this interview
I applied via Referral and was interviewed in Oct 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Why differancial used is outomobile
- Ans.
Differential is used in automobiles to allow the wheels to rotate at different speeds while turning.
Differential helps in turning the vehicle smoothly by allowing the outer wheel to rotate faster than the inner wheel.
It also helps in distributing power evenly between the wheels.
Without differential, the wheels would skid while turning.
Examples of differential types are open differential, limited-slip differential, and
- Q2. What is the ffunction of cluch plate
- Ans.
The clutch plate is a component in a manual transmission system that engages and disengages the engine from the transmission.
The clutch plate is located between the engine and the transmission.
It is responsible for transmitting power from the engine to the transmission.
When the clutch pedal is pressed, the clutch plate disengages from the flywheel, allowing the engine to spin freely.
When the clutch pedal is released, t...
- Q3. Diffrence between four wheel drive and two wheel drive
- Ans.
Four wheel drive (4WD) uses all four wheels to power the vehicle, while two wheel drive (2WD) uses only two wheels.
4WD provides better traction and control in off-road and slippery conditions
2WD is more fuel efficient and less expensive
Examples of 4WD vehicles include SUVs and trucks, while 2WD vehicles include sedans and coupes
Interview Preparation Tips
Kia Motors Interview FAQs
Tell us how to improve this page.
Kia Motors Interviews By Designations
- Kia Motors Junior Engineer Interview Questions
- Kia Motors Neem Trainee Interview Questions
- Kia Motors Assistant Manager Interview Questions
- Kia Motors Company Trainee Interview Questions
- Kia Motors Quality Engineer Interview Questions
- Kia Motors Team Lead Interview Questions
- Kia Motors Assistant Engineer Interview Questions
- Kia Motors Executive Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Electrical Technician Interview Questions
- Mechanical Technician Interview Questions
- Instrumentation Technician Interview Questions
- Hvac Technician Interview Questions
- Electrical Maintenance Technician Interview Questions
- Senior Electrical Technician Interview Questions
- Senior Technician Interview Questions
- Lab Technician Interview Questions
- Show more
Technician Interview Questions from Similar Companies
Fast track your campus placements
Kia Motors Technician Reviews and Ratings
based on 12 reviews
Rating in categories
|
Junior Engineer
651
salaries
|  ₹2.2 L/yr - ₹6 L/yr |
|
Company Trainee
389
salaries
| ₹2.2 L/yr - ₹4.5 L/yr |
|
Neem Trainee
310
salaries
| ₹1.5 L/yr - ₹3 L/yr |
|
Assistant Manager
286
salaries
| ₹4.9 L/yr - ₹15 L/yr |
|
Assistant Engineer
272
salaries
| ₹3.5 L/yr - ₹9.6 L/yr |
Hyundai Motor India Limited
Maruti Suzuki
Tata Motors
Mahindra & Mahindra
- Home >
- Interviews >
- Kia Motors Interview Questions >
- Kia Motors Technician Interview Questions
