Add office photos
Filter interviews by
Jaypee Infratech Civil Structural Engineer Interview Questions and Answers
Jaypee Infratech Civil Structural Engineer Interview Experiences
1 interview found
Selected
I applied via Walk-in and was interviewed before Oct 2022. There were 3 interview rounds.
(1 Question)
- Q1. What is hunch purpose
- Ans.
A hunch purpose is a preliminary design or concept that is based on intuition or educated guess rather than detailed analysis.
Hunch purpose is used in the early stages of a project to explore different design options.
It helps engineers to quickly visualize and communicate ideas before investing time and resources into detailed analysis.
Hunch purpose can be a rough sketch, a simple model, or a basic calculation to test
(2 Questions)
- Q1. Steel unit weight
- Ans.
Steel unit weight is the weight of a specific volume of steel material.
Steel unit weight is typically around 7850 kg/m^3.
It is important to consider the unit weight of steel when designing structures.
Different types of steel may have slightly different unit weights.
- Q2. What is concrete grade
- Ans.
Concrete grade refers to the strength of the concrete mix in terms of the minimum compressive strength it can withstand.
Concrete grade is typically denoted by the M prefix followed by a number, such as M20, M30, etc.
The number in the concrete grade represents the compressive strength of the concrete in megapascals (MPa) after 28 days of curing.
Higher concrete grades indicate higher strength and are typically used for s...
Interview Preparation Tips
Interview questions from similar companies
Civil Structural Engineer Interview Questions & Answers
L&T Construction
Anonymous
posted on 27 Jan 2022
I applied via Company Website and was interviewed in Jan 2022. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. What is GFC drawing
- Ans.
GFC drawing stands for Good for Construction drawing, which is a final set of drawings used for construction purposes.
GFC drawings are the final set of drawings used for construction purposes
They include all the necessary details and dimensions required for construction
GFC drawings are used by contractors and builders to construct the building as per the design
They are also used for obtaining necessary permits and appr...
- Q2. How's types of interview writin &burbly
Interview Preparation Tips
Civil Structural Engineer Interview Questions & Answers
Ashoka Buildcon
Anonymous
posted on 16 Feb 2022
I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.
(1 Question)
- Q1. What is volume of concrete?
- Ans.
The volume of concrete refers to the amount of space occupied by concrete.
Volume of concrete is measured in cubic units (e.g., cubic meters or cubic feet).
It is calculated by multiplying the length, width, and height of the concrete element.
For example, if a concrete slab has a length of 5 meters, width of 3 meters, and height of 0.15 meters, the volume of concrete would be 5 x 3 x 0.15 = 2.25 cubic meters.
Interview Preparation Tips
I applied via campus placement at Birla Institute of Technology and Science (BITS), Pilani and was interviewed in Jul 2024. There were 3 interview rounds.
Social media connecting people
(2 Questions)
- Q1. Timoshenko beam theory
- Q2. Sfd and bmd diagram
- Ans.
Sfd and bmd diagrams show the variation of shear force and bending moment along the length of a structural member.
SFD (Shear Force Diagram) shows the variation of shear force along the length of a beam or structural member.
BMD (Bending Moment Diagram) shows the variation of bending moment along the length of a beam or structural member.
SFD and BMD are essential for analyzing the internal forces and moments in a structu...
(2 Questions)
- Q1. Introduce yourself
- Ans.
I am a structural engineer with 5 years of experience in designing and analyzing buildings and bridges.
Graduated with a degree in Civil Engineering
Worked on various projects including high-rise buildings and pedestrian bridges
Proficient in software such as AutoCAD and SAP2000
- Q2. Preference of job location
- Ans.
I am open to job locations that offer opportunities for growth and development.
I am willing to relocate for the right job opportunity
I prefer job locations with good transportation options
I am open to both urban and rural locations depending on the job requirements
Interview Preparation Tips
Civil Structural Designer Interview Questions & Answers
McDermott International
Anonymous
posted on 26 Aug 2023
Selected
I applied via Recruitment Consulltant and was interviewed in Jul 2023. There were 2 interview rounds.
(6 Questions)
- Q1. Bolt to botlt distance how much
- Ans.
The bolt to bolt distance depends on the specific design requirements and standards for the structural connection.
The bolt to bolt distance is typically specified in the design drawings or calculations provided by the engineer.
It is important to follow the recommended bolt to bolt distance to ensure the structural integrity of the connection.
The bolt to bolt distance may vary depending on factors such as the size and t...
- Q2. Edge distance how much ?
- Ans.
Edge distance refers to the distance between the edge of a structural member and the center of a hole or fastener.
Edge distance is typically specified in design codes and standards.
It is important to maintain adequate edge distance to prevent failure of the connection.
The required edge distance can vary depending on the type of connection and the loading conditions.
For example, in steel connections, the minimum edge di...
- Q3. Column to base plate which type of weld ?
- Ans.
The type of weld used for connecting a column to a base plate is typically a fillet weld.
Fillet welds are commonly used for connecting structural steel components.
The size of the fillet weld is determined based on the forces and stresses the connection will experience.
Proper welding procedures and inspections are essential to ensure the weld's quality and strength.
- Q4. Column to beam how to joint ?
- Ans.
Column to beam joints are typically connected using various methods such as welding, bolting, or using mechanical connectors.
Common methods for connecting column to beam include welding, bolting, or using mechanical connectors
Welding is a common method where the column and beam are fused together using heat
Bolting involves using bolts to secure the column and beam together
Mechanical connectors such as shear connectors ...
- Q5. Top moment column to beam top side which weld ?
- Ans.
The top moment column to beam top side is typically welded on the compression side of the beam.
Weld the top moment connection on the compression side of the beam for maximum strength.
Ensure proper welding techniques and inspections are followed to maintain structural integrity.
Consider using fillet welds or groove welds depending on the design requirements.
Consult structural engineering codes and standards for specific...
- Q6. Edge distance to cover vertical reinforcement 75 mm all type of fdn
- Ans.
Edge distance of 75mm is required to cover vertical reinforcement in all types of foundations.
Edge distance is important to ensure proper anchorage and structural integrity of the reinforcement.
In this case, a minimum edge distance of 75mm is specified for covering vertical reinforcement in all types of foundations.
Examples of foundations where this requirement applies include spread footings, pile caps, and mat founda
Interview Preparation Tips
Structural Engineer Interview Questions & Answers
H.G. Infra Engineering
Anonymous
posted on 15 Sep 2023
Selected
I applied via Job Portal
About Previous experience and some site questions
(1 Question)
- Q1. Civil and Highway Structure related Question
Interview Preparation Tips
Structural Engineer Interview Questions & Answers
Consulting Engineers Group
Anonymous
posted on 10 May 2024
Selected
I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. I was shortlisted to the interview through my university. The interview was quite friendly and questions such as basic SFD and BMD were asked, losses of prestress were asked to explain, details about India...
Senior Structural Engineer Interview Questions & Answers
Gayatri Projects
Anonymous
posted on 17 Mar 2021
I applied via Naukri.com and was interviewed in Sep 2020. There were 3 interview rounds.
Interview Questionnaire
6 Questions
- Q1. 1. What is density of Steel ?
- Ans.
The density of steel is approximately 7.85 grams per cubic centimeter.
The density of steel is commonly measured in grams per cubic centimeter (g/cm³).
The density of steel can vary depending on the specific type and composition of the steel.
For example, the density of carbon steel is typically around 7.85 g/cm³.
Stainless steel, on the other hand, has a slightly lower density of around 7.9 g/cm³.
The density of steel is a...
- Q2. 2. Density of RCC and PCC
- Ans.
The density of RCC (Reinforced Cement Concrete) and PCC (Plain Cement Concrete) varies depending on the mix proportions.
The density of RCC typically ranges from 2200 to 2500 kg/m³.
The density of PCC generally ranges from 2200 to 2400 kg/m³.
The density can vary based on the type and size of aggregates used, the water-cement ratio, and the presence of additives.
For example, a mix with a higher proportion of aggregates wi...
- Q3. What is BBS and how it is calculated ?
- Ans.
BBS stands for Bar Bending Schedule. It is a document that provides details of reinforcement steel bars required for a construction project.
BBS is calculated based on the design drawings and specifications.
It includes details such as bar diameter, length, shape, and number of bars required for each structural element.
BBS helps in estimating the quantity of steel required and also ensures that the reinforcement is place...
- Q4. What type of Structures you executed before ?
- Ans.
I have executed various types of structures including high-rise buildings, bridges, and industrial facilities.
Executed high-rise buildings with complex structural systems
Designed and analyzed bridges with different span lengths and types of materials
Managed the structural design of industrial facilities such as power plants and manufacturing plants
Worked on retrofitting and rehabilitation of existing structures
Collabor...
- Q5. How much experience do you have ?
- Q6. What is your salary expectation?
Interview Preparation Tips
Skills evaluated in this interview
(2 Questions)
- Q1. What is dual case in finding R value in EQ
- Ans.
Dual case in finding R value in EQ refers to considering both the worst-case scenario and the best-case scenario.
Dual case involves analyzing the structure's response to both maximum and minimum loads.
It helps in determining the range of possible outcomes for the structure.
For example, in seismic design, dual case analysis considers both the maximum and minimum seismic forces that the structure may experience.
- Q2. Why you are shifting your job
Interview Preparation Tips
Civil Structural Engineer Interview Questions & Answers
Ashoka Buildcon
Anonymous
posted on 5 Feb 2022
I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.
(1 Question)
- Q1. What's volume of concrete?
- Ans.
Volume of concrete refers to the amount of space occupied by concrete.
Volume of concrete is measured in cubic meters or cubic feet.
It is calculated by multiplying the length, width, and height of the concrete structure.
For example, if a concrete slab is 10 meters long, 5 meters wide, and 0.15 meters thick, the volume of concrete would be 7.5 cubic meters.
The volume of concrete is an important factor in determining the ...
Interview Preparation Tips
Jaypee Infratech Interview FAQs
Tell us how to improve this page.
Jaypee Infratech Interviews By Designations
- Jaypee Infratech Civil Structural Engineer Interview Questions
- Jaypee Infratech Desktop Support Engineer Interview Questions
- Jaypee Infratech General Manager Interview Questions
- Jaypee Infratech Manager Interview Questions
- Jaypee Infratech Quantity Surveyor Interview Questions
- Jaypee Infratech System Engineer Interview Questions
Interview Questions for Popular Designations
- Structural Engineer Interview Questions
- Senior Structural Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Junior Structural Engineer Interview Questions
- Senior Structural Design Engineer Interview Questions
- Structural Engineer Trainee Interview Questions
- Civil Structural Designer Interview Questions
- Structural Steel Detailer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
|
Assistant Manager
5
salaries
|  ₹7 L/yr - ₹8.5 L/yr |
|
Manager
4
salaries
| ₹7.5 L/yr - ₹10 L/yr |
|
Civil Site Engineer
4
salaries
| ₹2.2 L/yr - ₹3.3 L/yr |
|
Senior Field Engineer
4
salaries
| ₹6 L/yr - ₹7 L/yr |
|
Plaza Controller
4
salaries
| ₹2.6 L/yr - ₹3 L/yr |
DLF
Larsen & Toubro Limited
Tata Projects
GMR Group
Calculate your in-hand salary
- Home >
- Interviews >
- Jaypee Infratech Interview Questions >
- Jaypee Infratech Civil Structural Engineer Interview Questions
