Upload Button Icon Add office photos

Jacobs Engineering Group

Compare button icon Compare button icon Compare

Filter interviews by

Jacobs Engineering Group Assistant Engineer - Civil Interview Questions and Answers

Updated 11 Jul 2024

Jacobs Engineering Group Assistant Engineer - Civil Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I was interviewed before Jul 2023.

Round 1 - Technical 

(1 Question)

  • Q1. Basic Highway design

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. BMD draw SFD draw

I applied via LinkedIn and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. What is hydration process during casting of concrete?
  • Ans. 

    Hydration process is the chemical reaction between cement and water which results in the hardening of concrete.

    • Hydration process starts as soon as water is added to cement.

    • The reaction produces heat and causes the mixture to harden and gain strength.

    • The process continues for weeks and even months, resulting in a stronger and more durable concrete.

    • The amount of water used in the mixture affects the hydration process and...

  • Answered by AI
  • Q2. Concrete strength depend ?
  • Ans. 

    Concrete strength depends on various factors.

    • Water-cement ratio

    • Type and quality of cement

    • Aggregate size and shape

    • Curing conditions

    • Mix design

    • Age of concrete

    • Temperature and humidity

    • Presence of admixtures

  • Answered by AI
  • Q3. Why used send in concrete mixer
  • Ans. 

    Water is added to concrete mixer to make the mixture more workable and to achieve the desired consistency.

    • Water is added to hydrate the cement and activate the chemical reaction that causes it to harden

    • The amount of water added affects the strength and durability of the concrete

    • Too much water can weaken the concrete and cause cracking

    • The water should be added gradually and mixed thoroughly to ensure even distribution

    • Ot...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for AECOM Assistant Engineer - Civil interview:
  • Environmental effect on concrete
Interview preparation tips for other job seekers - Please increase knowledge inhance of fresher and experienced

I applied via Naukri.com and was interviewed in May 2020. There were 3 interview rounds.

Interview Questionnaire 

8 Questions

  • Q1. Previous what experience you have ?
  • Q2. What type of checking done on site?
  • Q3. Which grade used on your site?
  • Ans. 

    We use grade 40 concrete for our site construction.

    • Grade 40 concrete is commonly used for structural applications in construction.

    • It has a compressive strength of 40 megapascals (MPa) after 28 days of curing.

    • Grade 40 concrete is suitable for various construction projects such as buildings, bridges, and pavements.

  • Answered by AI
  • Q4. Why cover is provide to the structure s?
  • Ans. 

    Cover is provided to structures for protection against environmental factors and to increase their lifespan.

    • Protects against rain, snow, wind, and sunlight

    • Prevents corrosion and deterioration of materials

    • Increases lifespan of the structure

    • Improves aesthetics of the structure

    • Examples: roofs, walls, paint coatings

  • Answered by AI
  • Q5. Acceptance criteria for the compressive strength ?
  • Ans. 

    Acceptance criteria for compressive strength in civil engineering

    • Compressive strength is the ability of a material to withstand compressive loads

    • Acceptance criteria for compressive strength is determined by the design specifications and standards

    • The compressive strength of concrete is typically measured in pounds per square inch (psi)

    • The acceptance criteria for compressive strength of concrete varies depending on the t

  • Answered by AI
  • Q6. How to check reinforcement ?
  • Ans. 

    Reinforcement can be checked by visual inspection, measuring diameter, spacing, and cover, and using non-destructive testing methods.

    • Visual inspection for any visible damage or corrosion

    • Measuring diameter of reinforcement bars using a caliper or micrometer

    • Measuring spacing between reinforcement bars using a tape measure

    • Measuring cover using a cover meter

    • Using non-destructive testing methods such as ultrasonic testing o

  • Answered by AI
  • Q7. If the cubes are failed then what will you do ?
  • Ans. 

    I will investigate the cause of failure and take necessary actions.

    • I will check if the cubes were properly cured and stored before testing.

    • I will verify if the testing machine was calibrated and operated correctly.

    • If the failure is due to poor quality of materials, I will reject the lot and order new ones.

    • If the failure is due to improper construction practices, I will instruct the workers to rectify the issue.

    • I will d...

  • Answered by AI
  • Q8. What kind of steel you used in previous project ?
  • Ans. 

    In the previous project, we used structural steel for the construction of the building.

    • Structural steel was used for its high strength and durability.

    • It was used in the construction of beams, columns, and other load-bearing elements.

    • The specific type of steel used may vary depending on the project requirements and design specifications.

    • Examples of commonly used structural steels include ASTM A36, ASTM A572, and ASTM A9

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Genuinely learn your work. And get deep knowledge related to the work .your marks percentage and all doesn't matter .but what type of experience ,you have got it's really matter.learn more as well as grow more .

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Feb 2023. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. Basic questions regarding previous jobs.
  • Q2. What type of work You do?
  • Q3. How much experience do you have and in which sector?

Interview Preparation Tips

Interview preparation tips for other job seekers - Just prepared for basic questions regarding site execution, QS, BBS etc

I applied via Approached by company and was interviewed in Dec 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. What is mixtatio of concrete, what are the type of IS code, what is setting time of cement why proved clear cover, transition curve , supervisor elevation, pavement design, what cover use in beam , sorry I...
  • Ans. 

    Answering questions related to concrete mix, IS codes, cement setting time, clear cover, transition curve, supervisor elevation, pavement design, and beam cover.

    • Mix ratio of concrete is the proportion of cement, sand, and aggregate used in the mixture.

    • IS codes are Indian Standards codes that provide guidelines for construction materials and practices.

    • Setting time of cement is the time taken by cement to harden and gain...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be serious during interview
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. LOD stages in BIM
  • Ans. 

    LOD stages in BIM refer to the Level of Development which defines the amount of detail and accuracy of a model at different stages of a project.

    • LOD 100: Conceptual design with basic massing and spatial relationships

    • LOD 200: Generalized elements with approximate quantities, size, shape, location, and orientation

    • LOD 300: Specific elements with accurate quantities, size, shape, location, and orientation

    • LOD 400: Detailed e...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Excessive toxicity and office politics.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical questions regarding codes and standards ASHRAE/NFPA/IPC
  • Q2. Technical questions regarding codes and standards

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview will be technical in nature. They look for engineers/modelers hence revit test will also be there
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Approached by Company and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. In which direction will you add bracing in steel structure? and why?
  • Ans. 

    Bracing should be added in the weak axis direction to provide stability and prevent buckling.

    • Bracing should be added in the weak axis direction to prevent buckling.

    • Bracing helps to stabilize the structure and distribute loads more efficiently.

    • Examples of bracing in steel structures include diagonal bracing, cross bracing, and portal bracing.

  • Answered by AI
  • Q2. What are different check in footing?
  • Ans. 

    Different checks in footing include bearing capacity check, settlement check, sliding check, and overturning check.

    • Bearing capacity check ensures the soil can support the load without failure.

    • Settlement check ensures the footing settles within acceptable limits.

    • Sliding check ensures the footing does not slide on the soil.

    • Overturning check ensures the footing does not overturn due to lateral forces.

  • Answered by AI
  • Q3. One way shear and two way shear in footing explain
  • Ans. 

    One way shear occurs in footings when load is applied in one direction, while two way shear occurs when load is applied in two directions.

    • One way shear typically occurs in rectangular footings where the load is applied in one direction.

    • Two way shear occurs in square footings or when the load is applied in two directions.

    • One way shear is calculated using the formula Vc = 0.5 * f'c * b * d, while two way shear is calcula

  • Answered by AI
  • Q4. What type of structures have you worked upon?
  • Ans. 

    I have worked on various types of structures including commercial buildings, residential homes, bridges, and industrial facilities.

    • Commercial buildings

    • Residential homes

    • Bridges

    • Industrial facilities

  • Answered by AI
  • Q5. Why do you want to switch?

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Hr conform my interview cedul not ablable person.
  • Q2. No any question
Round 3 - Technical 

(4 Questions)

  • Q1. Conform to interview
  • Q2. Conform my job queak
  • Q3. No question any other to
  • Q4. No any questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Quick conform

Jacobs Engineering Group Interview FAQs

How many rounds are there in Jacobs Engineering Group Assistant Engineer - Civil interview?
Jacobs Engineering Group interview process usually has 1 rounds. The most common rounds in the Jacobs Engineering Group interview process are Technical.

Tell us how to improve this page.

Jacobs Engineering Group Assistant Engineer - Civil Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Jacobs Engineering Group Assistant Engineer - Civil Salary
based on 6 salaries
₹5 L/yr - ₹9.3 L/yr
56% more than the average Assistant Engineer - Civil Salary in India
View more details
Design Engineer
258 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
154 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Design Engineer
104 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
100 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
73 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jacobs Engineering Group with

AECOM

4.2
Compare

Bechtel

4.0
Compare

Fluor Corporation

4.3
Compare

Worley

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview