J. Kumar Infraprojects Senior Structural Engineer Interview Questions and Answers

Q1. Bridge construction and BBS
Add your answer
Q2. Execution of site like vup
Add your answer

Q1. What is the is code for structure
Ans. 
The IS code for structures in India is IS 456:2000, which covers the general requirements for the design and construction of reinforced concrete structures.
• The IS code for structures in India is IS 456:2000

• It covers the general requirements for the design and construction of reinforced concrete structures

• The code provides guidelines for materials, design, construction, quality control, and maintenance of structures
Answered by AI
Add your answer

Q1. What is your straight & weakness?
Add your answer

Q1. What is the IS code of pile.
Ans. 
IS 2911 is the Indian Standard code for design and construction of pile foundations.
• IS 2911 is the code for design and construction of pile foundations in India.

• It covers various types of piles including driven piles, bored cast-in-situ piles, etc.

• The code provides guidelines for the design, materials, construction, and testing of piles.

• It ensures the safety and stability of structures supported by piles.

• Example: IS 29...read more
Answered by AI
Add your answer
Q2. What is the density of bentonite during piling.
Ans. 
The density of bentonite during piling is typically around 1.0 to 1.2 g/cm^3.
• The density of bentonite can vary depending on the specific type and concentration used.

• Higher density bentonite is often preferred for better support during piling operations.

• Typical range of density for bentonite during piling is 1.0 to 1.2 g/cm^3.
Answered by AI
Add your answer

Q1. What is mean by shear key
Ans. 
Shear key is a device used to transfer shear forces between two components in a structure.
• Shear keys are typically used in construction joints to prevent sliding between adjacent components.

• They are designed to resist horizontal forces and ensure stability.

• Shear keys can be found in structures such as bridges, buildings, and dams.

• Examples include shear keys in bridge expansion joints to prevent movement between bridge
Answered by AI
Add your answer
Q2. Different between columns and beams
Ans. 
Columns are vertical structural members that support loads, while beams are horizontal members that transfer loads to columns or walls.
• Columns are vertical and primarily support compressive loads.

• Beams are horizontal and primarily support bending loads.

• Columns are typically taller than they are wide, while beams are typically wider than they are tall.

• Examples: In a building, columns support the weight of the floors abo...read more
Answered by AI
Add your answer

Q1. Bolt to botlt distance how much
Ans. 
The bolt to bolt distance depends on the specific design requirements and standards for the structural connection.
• The bolt to bolt distance is typically specified in the design drawings or calculations provided by the engineer.

• It is important to follow the recommended bolt to bolt distance to ensure the structural integrity of the connection.

• The bolt to bolt distance may vary depending on factors such as the size and t...read more
Answered by AI
View 1 more answer
Q2. Edge distance how much ?
Ans. 
Edge distance refers to the distance between the edge of a structural member and the center of a hole or fastener.
• Edge distance is typically specified in design codes and standards.

• It is important to maintain adequate edge distance to prevent failure of the connection.

• The required edge distance can vary depending on the type of connection and the loading conditions.

• For example, in steel connections, the minimum edge di...read more
Answered by AI
View 1 more answer
Q3. Column to base plate which type of weld ?
Ans. 
The type of weld used for connecting a column to a base plate is typically a fillet weld.
• Fillet welds are commonly used for connecting structural steel components.

• The size of the fillet weld is determined based on the forces and stresses the connection will experience.

• Proper welding procedures and inspections are essential to ensure the weld's quality and strength.
Answered by AI
View 1 more answer
Q4. Column to beam how to joint ?
Ans. 
Column to beam joints are typically connected using various methods such as welding, bolting, or using mechanical connectors.
• Common methods for connecting column to beam include welding, bolting, or using mechanical connectors

• Welding is a common method where the column and beam are fused together using heat

• Bolting involves using bolts to secure the column and beam together

• Mechanical connectors such as shear connectors ...read more
Answered by AI
View 2 more answers
Q5. Top moment column to beam top side which weld ?
Ans. 
The top moment column to beam top side is typically welded on the compression side of the beam.
• Weld the top moment connection on the compression side of the beam for maximum strength.

• Ensure proper welding techniques and inspections are followed to maintain structural integrity.

• Consider using fillet welds or groove welds depending on the design requirements.

• Consult structural engineering codes and standards for specific...read more
Answered by AI
View 1 more answer
Q6. Edge distance to cover vertical reinforcement 75 mm all type of fdn
Ans. 
Edge distance of 75mm is required to cover vertical reinforcement in all types of foundations.
• Edge distance is important to ensure proper anchorage and structural integrity of the reinforcement.

• In this case, a minimum edge distance of 75mm is specified for covering vertical reinforcement in all types of foundations.

• Examples of foundations where this requirement applies include spread footings, pile caps, and mat founda
Answered by AI
View 1 more answer

Social media connecting people

Q1. Timoshenko beam theory
Add your answer
Q2. Sfd and bmd diagram
Ans. 
Sfd and bmd diagrams show the variation of shear force and bending moment along the length of a structural member.
• SFD (Shear Force Diagram) shows the variation of shear force along the length of a beam or structural member.

• BMD (Bending Moment Diagram) shows the variation of bending moment along the length of a beam or structural member.

• SFD and BMD are essential for analyzing the internal forces and moments in a structu...read more
Answered by AI
Add your answer

Q1. Introduce yourself
Ans. 
I am a structural engineer with 5 years of experience in designing and analyzing buildings and bridges.
• Graduated with a degree in Civil Engineering

• Worked on various projects including high-rise buildings and pedestrian bridges

• Proficient in software such as AutoCAD and SAP2000
Answered by AI
Add your answer
Q2. Preference of job location
Ans. 
I am open to job locations that offer opportunities for growth and development.
• I am willing to relocate for the right job opportunity

• I prefer job locations with good transportation options

• I am open to both urban and rural locations depending on the job requirements
Answered by AI
Add your answer