Upload Button Icon Add office photos

Intel

Compare button icon Compare button icon Compare

Filter interviews by

Intel Component Design Engineer Interview Questions, Process, and Tips

Updated 23 Aug 2024

Top Intel Component Design Engineer Interview Questions and Answers

  • Q1. NAND, NOR structures and their sizing and how they would vary depending on loads
  • Q2. How to speed up a circuit. Can voltage scaling be helpful
  • Q3. Timing Analysis , what changes are required if circuit violets hold time and set up time constraints.
View all 14 questions

Intel Component Design Engineer Interview Experiences

14 interviews found

Interview Preparation Tips

Round: technical interview
Experience: In the first round they started with basic question like “Tell me about yourself?” . The entire technical questions were basic from the two books I suggested above. He asked me about 4-5 questions related to my M.Tech thesis work. The interviews went only for 20-25 min.

Round: TECHNICAL INTERVIEW
Experience: The second round was also based on basic and about 20-30 min.Third round was about 40-45 min in which all the question were based on resume. He asked me on every point which I have mentioned in my resume. He also asked to write algorithm related some basic puzzles.

Round: HR Interview
Experience: I was asked basic HR questions.

General Tips: Final Tips :
1. Resume plays the most important role in the selection. Make sure that you prepare well for the points you are writing in your resume.
2. Identify the companies you want to target. Be pragmatic in your choice and prepare accordingly.
3. For the aptitude problems form a group of people who are targeting same or relevant companies and discuss various problems. It will help you in understanding concepts/problems in less time.


College Name: IIT Kanpur

I applied via Campus Placement and was interviewed in Dec 2016. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. Draw a domino logic circuit
  • Ans. 

    A domino logic circuit is a type of digital circuit that uses a chain of inverters to propagate a signal.

    • A domino logic circuit consists of a chain of inverters connected in series.

    • The output of each inverter is connected to the input of the next inverter.

    • The input signal is applied to the first inverter in the chain.

    • The output of the last inverter in the chain is the output of the circuit.

    • Domino logic circuits are fas...

  • Answered by AI
  • Q2. How to speed up a circuit. Can voltage scaling be helpful
  • Ans. 

    Yes, voltage scaling can help speed up a circuit by increasing the voltage to improve signal propagation.

    • Increasing the voltage can reduce the resistance and capacitance effects, leading to faster signal propagation.

    • Voltage scaling can also increase the switching speed of transistors, improving overall circuit performance.

    • However, higher voltage levels may also increase power consumption and generate more heat, requiri...

  • Answered by AI
  • Q3. Static timing analysis. Asked to write equation for a circuit with 2 flipflops with a latch in middle(latch clock has a delay from FF clock). Concept of time borrowing
  • Q4. Transistor level designs for simple logic gates
  • Ans. 

    Transistor level designs involve using transistors to create simple logic gates.

    • Transistors can be used to create logic gates such as AND, OR, and NOT gates.

    • In an AND gate, two transistors are connected in series.

    • In an OR gate, two transistors are connected in parallel.

    • In a NOT gate, a single transistor is used.

    • Logic gates can be combined to create more complex circuits.

  • Answered by AI
  • Q5. Why Intel?
  • Ans. 

    Intel is a global leader in semiconductor technology, offering innovative solutions and a strong focus on research and development.

    • Intel has a strong reputation for cutting-edge technology and innovation

    • Intel invests heavily in research and development, providing opportunities for growth and learning

    • Intel offers a diverse range of products and services, allowing for a variety of projects and challenges

    • Intel has a globa...

  • Answered by AI
  • Q6. Asked about my PoRs

Interview Preparation Tips

Round: Technical Interview
Experience: Be clear about
Tips: Static timing analysis, Transistor level implementations

Round: HR Interview
Experience: Just for formality.
Tips: Show to enthusiasm to work in Intel

College Name: IIT Madras

Component Design Engineer Interview Questions Asked at Other Companies

Q1. 4) difference between curve mesh and curve through mesh in ug nx ... read more
Q2. what is stress ,strain, behavior of ductile material for tensile ... read more
asked in Intel
Q3. NAND, NOR structures and their sizing and how they would vary dep ... read more
asked in Intel
Q4. How to speed up a circuit. Can voltage scaling be helpful
Q5. Pipe flows ,distribution of stress , what is divergence , vortex ... read more

Interview Questionnaire 

6 Questions

  • Q1. NAND, NOR structures and their sizing and how they would vary depending on loads
  • Ans. 

    NAND and NOR structures are logic gates used in digital circuits. Their sizing varies based on the loads they need to drive.

    • NAND and NOR gates are fundamental building blocks in digital circuit design.

    • The size of NAND and NOR gates is determined by the number of inputs and the loads they need to drive.

    • For NAND gates, the size of the transistors in the pull-up network is increased to handle larger loads.

    • For NOR gates, t...

  • Answered by AI
  • Q2. Timing analysis questions
  • Q3. Design flow for a chip development
  • Ans. 

    The design flow for chip development involves several stages, including specification, architecture, design, verification, and manufacturing.

    • Specification: Define the requirements and functionality of the chip.

    • Architecture: Determine the high-level structure and components of the chip.

    • Design: Create the detailed circuitry and layout of the chip.

    • Verification: Test and validate the chip design for functionality and perfo...

  • Answered by AI
  • Q4. Questions on timings. delay in digital circuits
  • Q5. Where energy is consumed in transistors?
  • Ans. 

    Energy is consumed in transistors primarily in the form of heat.

    • Energy is consumed in the form of heat due to resistive losses in the transistor.

    • Switching between on and off states also consumes energy.

    • Leakage current in transistors leads to energy consumption.

    • Energy consumption can vary based on the transistor's size, material, and operating conditions.

  • Answered by AI
  • Q6. Based on given situation

Interview Preparation Tips

Round: Interview
Experience: Questions were like: What is HOLD and SETup time? Which is more important? How to solve the hold and set up time faults? Questions from chip development were from starting of Specs till it comes out of Fibs. Front end and back-end design, design cycle, timing closure.etc. Tech interv.iew concentrated on stuff from Rabaey's digital book. To be specific, they asked about sizing of NMOS & PMOS in CMOS logic, parasitic caps in wires,basics of VLSI design flow, synthesis.

Round: Interview
Experience: They asked normal HR questions and in ethics they gave some cases like the one thatfollows:'Your friend' is working in a rival company and he forgets some important data in your room that can benefit your company. Would you go ahead and use those data?

Skill Tips: """Good CGPA is a must."""
Skills: Tech Fundaeu00b7s, General Knowledge, Proper knowledge of work done in Internships
College Name: IIT Madras

Skills evaluated in this interview

Interview Preparation Tips

Round: Test
Experience: It was outsourced to some online venture.. Test was quite tough.. 
Tips: A good grasp on aptitude questions will help immensely.. There are many common aptitude questions which will be asked in most exams.. study them well.. be good with probability, permutations and combinations.. Should know the basic electronic circuits, KCL, KVL etc thoroughly..

Round: Technical Interview
Experience: Technical Interview went well.. They asked only simple basic questions!
Tips: Study the following courses well- Digital systems, Digital IC Design, Computer architecture..Knowledge on steps of VLSI design flow and latest technologies will give you an extra edge in the interview 

Round: HR Interview
Experience: there were two rounds! Asked some convention HR questions. Also based on resume..
Tips: Be ready with answers to conventional HR questions like "Why do you want to join Intel?" , "Why should we hire you" etc. Make sure that your answers will let them know that you have done a good background study on the company(you SHOULD do that in advance!).. Be ready to explain each and every point in resume. Many time they were looking for non conventional answers.. Good preparation in advance helped me a lot!

General Tips: Be prepared.. In an interview what matters most is preparation not CGPA!
Skills:
College Name: IIT Madras
Motivation: Its the best in the world!

Intel interview questions for designations

 Design Engineer

 (3)

 Analog Design Engineer

 (3)

 Hardware Design Engineer

 (1)

 SOC Design Engineer

 (6)

 Physical Design Engineer

 (2)

 Senior Physical Design Engineer

 (2)

 Physical Design Engineer Trainee

 (2)

 Digital Design Engineer

 (2)

Intel Interview FAQs

How many rounds are there in Intel Component Design Engineer interview?
Intel interview process usually has 2 rounds. The most common rounds in the Intel interview process are Technical, Resume Shortlist and One-on-one Round.
How to prepare for Intel Component Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Intel. The most common topics and skills that interviewers at Intel expect are Design Engineering, Perl, System Verilog, Python and Circuit Designing.
What are the top questions asked in Intel Component Design Engineer interview?

Some of the top questions asked at the Intel Component Design Engineer interview -

  1. NAND, NOR structures and their sizing and how they would vary depending on lo...read more
  2. How to speed up a circuit. Can voltage scaling be help...read more
  3. Timing Analysis , what changes are required if circuit violets hold time and se...read more

Tell us how to improve this page.

Intel Component Design Engineer Interview Process

based on 2 interviews

4 Interview rounds

  • Technical Round
  • HR Round
  • Aptitude Test Round
  • Personal Interview1 Round
View more

Interview Questions from Similar Companies

Qualcomm Interview Questions
3.8
 • 274 Interviews
Tata Electronics Interview Questions
4.0
 • 148 Interviews
Texas Instruments Interview Questions
4.1
 • 125 Interviews
Nvidia Interview Questions
3.7
 • 104 Interviews
Synopsys Interview Questions
3.8
 • 89 Interviews
Molex Interview Questions
3.9
 • 53 Interviews
View all
Intel Component Design Engineer Salary
based on 62 salaries
₹12 L/yr - ₹39 L/yr
68% more than the average Component Design Engineer Salary in India
View more details

Intel Component Design Engineer Reviews and Ratings

based on 4 reviews

5.0/5

Rating in categories

3.2

Skill development

5.0

Work-life balance

4.6

Salary

4.8

Job security

4.1

Company culture

3.2

Promotions

3.9

Work satisfaction

Explore 4 Reviews and Ratings
Software Engineer
334 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

SOC Design Engineer
221 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

System Validation Engineer
197 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Development Engineer
160 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
159 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Intel with

Qualcomm

3.8
Compare

Nvidia

3.7
Compare

Microsoft Corporation

4.0
Compare

Advanced Micro Devices

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview