AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
DesignTech Systems
Compare
Filter interviews by
DesignTech Systems Component Design Engineer Interview Questions, Process, and Tips
DesignTech Systems Component Design Engineer Interview Experiences
1 interview found
Anonymous
I applied via Naukri.com and was interviewed in Nov 2020. There was 1 interview round.
Interview Questionnaire
5 Questions
- Q1. 1)what is casting &it's types?
- Ans.
Casting is a manufacturing process in which a liquid material is poured into a mold and allowed to solidify.
Types of casting include sand casting, investment casting, die casting, and continuous casting.
Sand casting involves creating a mold from sand and pouring the molten metal into it.
Investment casting involves creating a wax pattern and coating it in ceramic before pouring in the molten metal.
Die casting involves i...
- Q2. 2)difference between cylindricity and runout
- Ans.
Cylindricity is the roundness of a cylinder while runout is the deviation of a rotating part from its axis.
Cylindricity is a 2D measurement while runout is a 3D measurement.
Cylindricity is measured using a cylindrical gauge while runout is measured using a dial gauge.
Cylindricity is important in manufacturing cylindrical parts while runout is important in ensuring smooth rotation of parts.
Examples of cylindricity inclu...
- Q3. 3) difference between run out and total runout
- Ans.
Runout is the deviation of a rotating component from its ideal axis, while total runout is the maximum amount of runout in any direction.
Runout is a measure of how much a rotating component deviates from its ideal axis
Total runout is the maximum amount of runout in any direction
Runout can be caused by factors such as manufacturing defects, wear and tear, or misalignment
Total runout is important in ensuring that a rotat...
- Q4. 4) difference between curve mesh and curve through mesh in ug nx software
- Ans.
Curve mesh and curve through mesh are two different methods of creating curves in UG NX software.
Curve mesh creates a curve that passes through the mesh points, while curve through mesh creates a curve that follows the mesh points.
Curve mesh is useful for creating curves that need to pass through specific points, while curve through mesh is useful for creating smooth curves that follow the mesh.
Curve mesh can be create...
- Q5. 5)what is hot & cold chamber casting
- Ans.
Hot and cold chamber casting is a process used to cast metals with different melting points.
Hot chamber casting is used for metals with low melting points like zinc and magnesium
Cold chamber casting is used for metals with high melting points like aluminum and copper
In hot chamber casting, the metal is melted in the casting machine itself
In cold chamber casting, the metal is melted in a separate furnace and then transf...
Interview Preparation Tips
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
SAGAR SHAH
Interview Preparation Tips
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.
Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60
Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.
Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P
General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P
Interview Questionnaire
3 Questions
- Q1. Why our company?
- Ans.
Your company's innovative approach to design and engineering aligns with my passion for pushing boundaries and creating impactful solutions.
Your company's reputation for excellence in the industry
The opportunity to work with a talented and diverse team
The chance to work on challenging and exciting projects
The potential for professional growth and development
The company's commitment to sustainability and social responsi
- Q2. What can you offer to our company?
- Ans.
I can offer my expertise in design engineering, strong problem-solving skills, and a passion for innovation.
Expertise in design engineering
Strong problem-solving skills
Passion for innovation
Ability to work collaboratively in a team environment
Experience with CAD software such as SolidWorks and AutoCAD
Familiarity with manufacturing processes and materials
Excellent communication and presentation skills
- Q3. You have a good CG why aren’t you going for higher studies?
- Ans.
I believe that practical experience is equally important as higher studies in my field.
I have gained valuable experience through internships and projects
I am constantly learning and improving my skills through online courses and workshops
I am open to pursuing higher studies in the future if it aligns with my career goals
I believe that hands-on experience is crucial in the design engineering field
Interview Preparation Tips
Experience: Two tests were there. One CAT type questions- maths, quant, verbal Another related to the department. Both were objective type.
Tips: Even without any CAT preparation, you can clear it quite easily. For the department related exam, a basic preparation of core subjects for placements is enough. Most of the questions were CV based. No negative marks, I think. So fill all the questions.
Round: Interview
Experience: It went on for about 20 mins. All were technical questions and most of them were from the things I’ve stated in my CV.
Tips: Write only what you’ve done in your CV, if not at least be prepared to defend everything. Otherwise if you are confident with your basics it should not be a big problem to clear this round.
Round: Interview
Experience: By the time I got till here, I already knew that I almost got placed. So it was very friendly and went on for about 10 minutes.
Skill Tips: Being a core design consultancy, more emphasis was on academic performance. I think a CGPA above 7.5 or 8 is very ideal. They looked deep into my internship and project. Various questions about what I had done there and how well I got practical exposure were tested.
College Name: IIT KHARAGPUR
Interview Questionnaire
1 Question
- Q1. What is PHP
- Ans.
PHP is a server-side scripting language used for web development.
PHP stands for Hypertext Preprocessor.
It is an open-source language.
PHP code is executed on the server, generating HTML which is sent to the client.
It can be embedded into HTML code.
PHP is commonly used for creating dynamic web pages and web applications.
Popular websites like Facebook, Wikipedia, and WordPress are built using PHP.
Interview Preparation Tips
Skills evaluated in this interview
I was interviewed before Aug 2016.
Interview Preparation Tips
Experience: If we clear the cut-off criteria, we're eligible to sit for the test.
Tips: Needs strong basics. So read up on your core subjects.
Duration: 1 hour 30 minutes
Total Questions: 50
Round: Group Discussion
Experience: Once the topic was set, we were all given a chance to speak and express our views. After which the discussion was open for debate.
Tips: 1. Make sure to express your point. But not force it down anyone's throat
2. Sometime interjecting is all right. Especially if its against your point
3. It's okay to change your views. That's the whole point of a GD
4. If you get to summarise the proceeding of the GD, you can score brownie point
5. Have a discussion, not an argument
Duration: 1 hour
Round: Technical Interview
Experience: Questions in this interview begin with basic science and physics questions, that move on to questions from basic concepts of engineering. If the candidate is able to answer these questions, the interviewer proceeds to more technical questions.
Tips: Again, basics need to be strong. Answer to the point. Be polite and friendly with the interviewer. Answer confidently. But if you don't know the answer, say that you don't know instead of BS.
Round: HR Interview
Experience: Questions about family background. Career plan of the candidate. How many years the candidate hopes to work with the company.
Tips: Don't lie. Don't make false promises.
Skills: Aptitude, Technical Skills
College Name: PES Institute Of Technology, Bangalore South Campus, Bangalore
Interview Questionnaire
2 Questions
- Q1. Previous experience and some technical questions in subjects
- Q2. Package
Interview Preparation Tips
Experience: technical skill
tool knowledge
experience
Round: Test
Experience: tool test
I applied via Approached by Company and was interviewed in Nov 2017. There were 4 interview rounds.
Interview Preparation Tips
Experience: Design Engineer
Round: Test
Experience: Tool test in CATIA V5 Software
General Tips: Design basics,
CATIA V5 tool knowledge
Skills: Engineering Drawing, Mechanical Engineering, Design Engineering, Catia
Duration: <1 week
Design Engineer Interview Questions & Answers
Tata Technologies
Lokeshwaran p.s
posted on 19 May 2018
I applied via Naukri.com and was interviewed in Dec 2017. There were 5 interview rounds.
Interview Questionnaire
2 Questions
- Q1. As usual tell me about your self after that based on my self intro next questions are asked,
- Q2. Reason for changing job
- Ans.
Seeking new challenges and opportunities for growth
Looking for a more challenging role to further develop my skills
Interested in exploring new technologies and industries
Seeking a company with better career advancement opportunities
Interview Preparation Tips
Experience: Given door pigtail wiring harness to root, followed by questions on catia electrical harness,
After that questions from CHS
General Tips: Just update weekly or at least monthly once your naukri profile,
Daily check the mails from naukri,
Present the things what you doing currently, highlight the work which one you know well also speak similar to the posting for which they interviewing, try to reduce saying don't know.
Skills: CHS , Catia, Communication
Duration: 1-4 weeks
I applied via Referral and was interviewed before May 2018. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Only what my previous work and my role and during that what I have achieved
Interview Preparation Tips
Skills: Communication, Body Language, Problem Solving, Presentation Skills, Decision Making Skills
Duration: <1 week
I applied via Referral and was interviewed in Sep 2019. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Current rating of USB used in bus?
- Ans.
The current rating of USB used in a bus varies depending on the USB version.
The USB 1.0 and 2.0 versions have a maximum current rating of 500mA.
The USB 3.0 version has a maximum current rating of 900mA.
The USB 3.1 and 3.2 versions have a maximum current rating of 1.5A.
USB Power Delivery (USB PD) can provide up to 5A of current.
The actual current rating may also depend on the specific USB device and its power requiremen
Interview Preparation Tips
DesignTech Systems Interview FAQs
Tell us how to improve this page.
DesignTech Systems Interviews By Designations
- DesignTech Systems Design Engineer Interview Questions
- DesignTech Systems CAE Engineer Interview Questions
- DesignTech Systems Talent Acquisition Executive Interview Questions
- DesignTech Systems Component Design Engineer Interview Questions
- DesignTech Systems Senior Engineer Interview Questions
- DesignTech Systems Intern Interview Questions
- DesignTech Systems Technical Engineer Interview Questions
- DesignTech Systems Junior Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Component Engineer Interview Questions
- Design Engineer Interview Questions
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- R&D Engineer Interview Questions
- Structural Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Research and Development Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
|
Design Engineer
435
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Technical Service Engineer
138
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Mechanical Engg. Design
85
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Design Engineer
84
salaries
| ₹0 L/yr - ₹0 L/yr |
|
CAE Engineer
78
salaries
| ₹0 L/yr - ₹0 L/yr |
Geometric
Tata Technologies
KPIT Technologies
Cadcamguru Solutions
- Home >
- Interviews >
- DesignTech Systems Interview Questions >
- DesignTech Systems Component Design Engineer Interview Questions
