Institute of Technical Education Interview Questions and Answers

Basic Aptitude Questions Reasoning & Verbal Ability

How is culture at IT Industries

Q1. What are the tensile forces acts on material
Ans. 
Tensile forces are forces that stretch or pull materials apart.
• Tensile forces act in the opposite direction of compressive forces

• Examples of tensile forces include stretching a rubber band or pulling on a rope

• Tensile strength is a measure of a material's ability to withstand tensile forces
Answered by AI
Add your answer
Q2. Write all formulas you know of Fluid Mechanics
Ans. 
Formulas in Fluid Mechanics
• Bernoulli's equation: P + 0.5ρv^2 + ρgh = constant

• Continuity equation: A1v1 = A2v2

• Navier-Stokes equation: ρ(∂v/∂t + v∇v) = -∇P + μ∇^2v + ρg

• Ideal gas law: PV = nRT

• Poiseuille's Law: Q = πr^4(ΔP)/(8ηL)
Answered by AI
Add your answer
Q3. Laws of thermodynamics
Ans. 
The fundamental laws of thermodynamics govern the behavior of energy in systems.
• First Law of Thermodynamics: Energy cannot be created or destroyed, only transferred or converted.

• Second Law of Thermodynamics: The entropy of an isolated system will always increase over time.

• Third Law of Thermodynamics: As temperature approaches absolute zero, the entropy of a system approaches a minimum value.

• Examples: A car engine conve...read more
Answered by AI
Add your answer
Q4. What is Fouriers Law write its equation
Ans. 
Fourier's Law describes the flow of heat through a material.
• Fourier's Law states that the rate of heat transfer through a material is directly proportional to the negative gradient of temperature and the area perpendicular to the direction of heat flow.

• The equation for Fourier's Law is q = -k * A * (dT/dx), where q is the heat transfer rate, k is the thermal conductivity of the material, A is the cross-sectional area, ...read more
Answered by AI
Add your answer
Q5. Explain Iron Carbon phase diagram
Ans. 
The Iron-Carbon phase diagram illustrates the phases and microstructures of iron-carbon alloys as a function of temperature and composition.
• Shows the phases of iron and carbon at different temperatures and compositions

• Includes regions for austenite, ferrite, cementite, and pearlite

• Critical points such as eutectic point and eutectoid point are marked

• Used to predict the microstructure of steel based on composition and he
Answered by AI
Add your answer
Q6. Stress Strain Curve Explain
Ans. 
The stress-strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.
• The curve typically consists of three main regions: elastic deformation, plastic deformation, and fracture.

• In the elastic region, the material deforms elastically and returns to its original shape when the stress is removed.

• The plastic region is where permanent deformation occurs, but the mater...read more
Answered by AI
Add your answer
Q7. Calculate SFD & BMD
Ans. 
SFD and BMD are calculated using equations of equilibrium and relationships between load, shear force, and bending moment.
• Calculate reactions at supports using equations of equilibrium

• Determine the shear force at different points along the beam by considering the applied loads and reactions

• Calculate the bending moment at different points by integrating the shear force diagram

• Plot the SFD and BMD based on the calculated...read more
Answered by AI
Add your answer
Q8. How to Calculate velocity of fluid flowing through pipe
Ans. 
Velocity of fluid flowing through a pipe can be calculated using the formula Q = A * V, where Q is the flow rate, A is the cross-sectional area of the pipe, and V is the velocity of the fluid.
• Calculate the cross-sectional area of the pipe using the formula A = π * r^2, where r is the radius of the pipe.

• Determine the flow rate (Q) of the fluid, which is typically measured in cubic meters per second (m^3/s) or liters per...read more
Answered by AI
Add your answer
Q9. What is Difference between entropy and enthalpy
Ans. 
Entropy is a measure of disorder or randomness in a system, while enthalpy is a measure of the heat energy in a system.
• Entropy is a thermodynamic property that measures the amount of energy in a system that is not available to do work.

• Enthalpy is a thermodynamic property that measures the total heat content of a system.

• Entropy increases in irreversible processes, while enthalpy remains constant.

• Entropy is denoted by S,...read more
Answered by AI
Add your answer
Q10. Draw Refrigeration Cycle Graph
Ans. 
The Refrigeration Cycle graph shows the process of cooling a space by transferring heat from inside to outside.
• The cycle starts with the refrigerant entering the compressor as a low-pressure gas.

• The refrigerant is compressed, raising its temperature and pressure, before entering the condenser where it releases heat to the surroundings.

• After losing heat, the refrigerant becomes a high-pressure liquid and flows into the ...read more
Answered by AI
Add your answer
Q11. Draw vapour absorption cycle graph
Ans. 
The vapor absorption cycle graph shows the relationship between pressure, temperature, and enthalpy during the process.
• The graph typically shows pressure on the y-axis and temperature on the x-axis.

• It includes lines representing the various stages of the cycle such as evaporation, absorption, and desorption.

• The enthalpy values at different points in the cycle can also be plotted on the graph.

• Example: The graph will sho...read more
Answered by AI
Add your answer
Q12. Draw Rankine otto & diesel cycle graph
Ans. 
The Rankine, Otto, and Diesel cycle graphs are commonly used in thermodynamics to analyze different types of heat engines.
• The Rankine cycle is used in steam power plants and consists of four processes: heat addition, isentropic expansion, heat rejection, and isentropic compression.

• The Otto cycle is used in spark-ignition engines and consists of four processes: isentropic compression, constant volume heat addition, isen...read more
Answered by AI
Add your answer

Q1. To be described the previous project and experience
Add your answer
Q2. Project requirement and arrengements
Add your answer
Q3. How to deal with the client
Add your answer
Q4. How to deal with the subcontractor
Add your answer

Q1. Brief about your education, career, previous projects handled, and role & responsibility in past organisations?
Add your answer
Q2. Current roles & responsibilities and value addition done by you and your team?
Add your answer
Q3. Process flow for planning throughout project life-cycle?
Add your answer
Q4. Critical/concerning areas to be monitored?
Add your answer
Q5. Productivity and permissible material wastage, process to prepare material reconciliation?
Add your answer
Q6. Understanding about claim and type of claim raised/supported to raise in past experience?
Add your answer
Q7. Experience of technical aspects and planning assessment required at tendering stage, capabilities to prepare tender submittals and proving insights to management on same?
Add your answer
Q8. Necessity of providing PMO support to management?
Add your answer
Q9. Understanding about role & responsibility of regional planning manager?
Add your answer
Q10. MIS and type of reports prepared in past and their significance for Top managemennt?
Add your answer

Q1. It was more related to what was mentioned in resume.
Add your answer

Q1. More related to high level judgement
Add your answer

Q1. Basic HR questions .
Add your answer

Q1. Your last work details
Add your answer
Q2. Your personal details
Add your answer

It was a technicaL + aptitude test with 60 minutes duration.

Q1. Basic questions regarding the projects that i have done.
Add your answer
Q2. They asked me about my favourite subjects and then they asked some basic questions regarding those subjects.
Add your answer

Q1. HR round in TCE is not an interview round rather it is a video assessment wherein we were given with two HR questions and we have to record a video answering the questions. maximum duration of the video sh...read more
Add your answer

Q1. What is hira ?
Ans. 
HIRA stands for Hazard Identification and Risk Assessment. It is a systematic process used to identify potential hazards and analyze the associated risks in a workplace.
• HIRA involves identifying hazards that could cause harm, assessing the risks associated with those hazards, and implementing control measures to mitigate the risks.

• It helps in creating a safer work environment by proactively addressing potential risks b...read more
Answered by AI
Add your answer
Q2. What is ua/uc.
Ans. 
UA/UC stands for Unsafe Acts/Unsafe Conditions, which are factors that contribute to accidents in the workplace.
• UA refers to actions taken by individuals that are unsafe, such as not wearing proper protective equipment.

• UC refers to conditions in the workplace that are unsafe, such as faulty equipment or inadequate lighting.

• Identifying and addressing UA/UC is crucial in preventing accidents and promoting a safe work env
Answered by AI
Add your answer

Q1. What is jsa. & LOTo system.
Ans. 
JSA stands for Job Safety Analysis, a process of identifying potential hazards in a job task. LOTO system stands for Lockout/Tagout, a safety procedure to ensure dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.
• JSA involves breaking down a job task into steps, identifying potential hazards at each step, and implementing controls to mitigate the r...read more
Answered by AI
Add your answer
Q2. What is material handling.How many types of Material handing.
Ans. 
Material handling refers to the movement, control, and protection of materials throughout the manufacturing, warehousing, distribution, consumption, and disposal processes.
• Material handling involves the movement of raw materials, work in progress, and finished goods within a facility or between different locations.

• There are four main types of material handling: manual, semi-automated, automated, and mechanized.

• Examples...read more
Answered by AI
Add your answer