AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Indus Projects Civil Site Engineer Interview Questions and Answers
Indus Projects Civil Site Engineer Interview Experiences
1 interview found
Interview Questionnaire
3 Questions
- Q1. Different between one and two way slabs?
- Ans.
One-way slabs span in one direction while two-way slabs span in two directions.
One-way slabs are supported on two opposite sides while two-way slabs are supported on all four sides.
One-way slabs are designed to resist bending in one direction while two-way slabs are designed to resist bending in two directions.
One-way slabs are typically used for long and narrow spans while two-way slabs are used for shorter spans with...
- Q2. Steel weight of metre length?
- Ans.
The weight of steel per meter length varies depending on the type of steel used.
The weight of steel per meter length can be calculated by multiplying the volume of steel with its density.
The density of steel varies depending on the type of steel used.
For example, the density of mild steel is 7850 kg/m³, while the density of stainless steel is 7480 kg/m³.
The weight of steel per meter length can also be found in steel we...
- Q3. Design the staircase?
- Ans.
Designing a staircase involves determining the number of steps, riser height, tread depth, and overall dimensions.
Determine the height of the floor to floor distance
Calculate the number of steps required based on the height and desired riser height
Determine the tread depth based on the number of steps and available space
Design the handrail and balustrade for safety
Consider the building code requirements for staircases
Top trending discussions
Interview questions from similar companies
Civil Site Engineer Interview Questions & Answers
Bahwan Engineering
Anonymous
posted on 27 Oct 2023
Selected
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
(1 Question)
- Q1. 1. Self indirection ? 2. What about the fall ceiling work ? 3. What kind of material using for waterproofing ? 4. What meaning of PPM ? 5. He was supervisor one door key is missing so what can you do ? 6. ...
- Ans.
I am Loganathan Gangadharan I Finished diploma in civil engineering with 10 years experience in Construction Field. Building background to eat not come down
(4 Questions)
- Q1. 1. 12 mm Steel Rod using for construction ok that lapping length how much
- Ans.
The lapping length for a 12 mm steel rod used in construction is typically 60 times the diameter of the rod.
Lapping length is usually 60 times the diameter of the steel rod
For a 12 mm steel rod, the lapping length would be 12 mm x 60 = 720 mm
Lapping is done to ensure continuity and strength in the reinforcement
- Q2. What type of footting using the oman country
- Ans.
In Oman, commonly used footings include spread footings, strip footings, and raft footings.
Spread footings are used for individual columns or walls and distribute the load over a larger area.
Strip footings are continuous footings that support a line of columns or walls.
Raft footings are used for large or irregularly shaped structures to distribute the load over a wider area.
In Oman, due to the sandy soil conditions, de...
- Q3. One concrete floor for broken so rectify the floor what kind of material using
- Ans.
To rectify a broken concrete floor, materials like concrete mix, epoxy resin, or self-leveling compound can be used.
Use concrete mix to fill in the broken areas and level the floor.
Apply epoxy resin to seal cracks and strengthen the floor.
Consider using self-leveling compound for a smooth and even surface.
Ensure proper preparation and cleaning of the floor before applying any material.
Consult with a structural engineer
- Q4. Concrete setting times how many days
- Ans.
Concrete setting times can vary depending on factors like temperature and mix design.
Concrete typically sets within 24-48 hours, but continues to harden over time.
Factors affecting setting time include temperature, humidity, and mix design.
For example, in hot weather, concrete may set faster, while in cold weather it may take longer.
Accelerators or retarders can be added to the mix to adjust setting times as needed.
Interview Preparation Tips
Civil Site Engineer Interview Questions & Answers
Patel Infrastructure
Anonymous
posted on 29 Jan 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2023. There were 2 interview rounds.
(1 Question)
- Q1. Plz brief himself
(2 Questions)
- Q1. Which type of foundation you done?
- Ans.
I have experience with various types of foundations including shallow foundations, deep foundations, and pile foundations.
Shallow foundations: These are used when the soil is stable and can support the load of the structure. Examples include spread footings and mat foundations.
Deep foundations: These are used when the soil near the surface is not suitable for supporting the load. Examples include pile foundations and d...
- Q2. Open foundation or pile foundation
Interview Preparation Tips
- Foundation
- Girder
- Piling
- Mnb
- Mjb
- culverts
- Flyovers
- Casting yard
- Reinforcement
- Site Execution
(5 Questions)
- Q1. Why are remove the pile head.
- Ans.
Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.
To prepare for further construction on top of the piles
To ensure proper load transfer to the foundation
To facilitate the installation of pile caps or beams
To adjust the pile length if necessary
- Q2. How many deduction of 90 degree angle.
- Ans.
There are four deductions of 90 degree angles.
A 90 degree angle is formed when two lines intersect at a right angle.
In a square, all four angles are 90 degrees.
In a rectangle, opposite angles are 90 degrees.
In a right triangle, one angle is always 90 degrees.
- Q3. What is static load test and dynamic load test.
- Ans.
Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.
Static load test involves applying a constant load to a structure and measuring its response over time.
Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.
Static load test helps determine the maxi...
- Q4. How many tolerance of pile load test.
- Ans.
The number of tolerance of pile load test depends on the specific project requirements and standards.
The number of tolerance of pile load test can vary based on the project specifications and standards.
Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.
Some projects may have more stringent tolerance requirements depending on the criticality of the structure.
It is important to refer...
- Q5. What is rang Density of bentonite and why is this use.
- Ans.
Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.
Range density of bentonite is typically between 17-22 lb/gal.
Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.
The range density of bentonite is important for determining its effectiveness in different applications.
Higher range density ...
Skills evaluated in this interview
(2 Questions)
- Q1. Questions will be asked on previous company roles and responsibilities.
- Q2. Depends upon previous experience.
(2 Questions)
- Q1. Basics on structure and finishings
- Q2. Questions on structure and finishings
Interview Preparation Tips
I applied via Job Fair and was interviewed before May 2023. There was 1 interview round.
(2 Questions)
- Q1. Why should we Hire you?
- Q2. Tell me ABT your self
Interview Questionnaire
6 Questions
- Q1. They were asked about previous work experience in detail.
- Q2. Previous Project details.
- Q3. Previous projects shuttering area and type of formwork
- Ans.
The previous projects involved various types of formwork with a total shuttering area of approximately 10,000 square meters.
Used traditional timber formwork for a residential building project
Implemented modular steel formwork for a commercial complex
Utilized aluminum formwork for a high-rise construction
Employed tunnel formwork for an underground structure
- Q4. Build-up area
- Q5. About subcontractors billing.
- Q6. Formwork,steel and masonry work daily productive
Interview Preparation Tips
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. What is the height of top guard rails,mid rails and toe board rails?
- Ans.
The height of top guard rails, mid rails, and toe board rails varies depending on the specific application and regulations.
The height of top guard rails is typically between 42 and 45 inches above the walking surface.
Mid rails are typically located halfway between the top rail and the walking surface.
Toe board rails are typically between 4 and 6 inches high and are installed at the base of the guardrail system.
Specific...
- Q2. What is safe working load and formula?
- Ans.
Safe working load is the maximum weight a structure or equipment can safely support without risk of failure.
SWL is determined by factors such as material strength, design, and intended use.
Formula for SWL varies depending on the type of equipment or structure.
For example, the SWL formula for a crane may take into account the boom length, angle, and weight distribution.
It is important to always follow the manufacturer's...
- Q3. Job role and duties of HSE engineer
Interview Preparation Tips
Dharanitharan M
Software or tool test
(2 Questions)
- Q1. Related to technical question about fabrication.
- Q2. Tool related question
Selected
I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.
(3 Questions)
- Q1. What was your previous salary what is your expect
- Ans.
I am unable to provide my previous salary as it is confidential. However, I am expecting a competitive salary based on my qualifications and experience.
My previous salary is confidential and I am unable to disclose it.
I am expecting a salary that is commensurate with my qualifications and experience.
I am open to discussing salary expectations during the negotiation process.
I believe that a competitive salary is importa...
- Q2. Previous salary 1 expected salary 2 whatever.
- Q3. Educational mass card certificate documents previous salary certificate if you worked
Interview Preparation Tips
Indus Projects Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Civil Foreman Interview Questions
- Site Engineer Interview Questions
- Civil Supervisor Interview Questions
- Show more
Civil Site Engineer Interview Questions from Similar Companies
Indus Projects Civil Site Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Site Engineer
10
salaries
|  ₹2.4 L/yr - ₹6 L/yr |
|
Senior Engineer
8
salaries
| ₹6 L/yr - ₹7.2 L/yr |
|
Civil Site Engineer
7
salaries
| ₹2.2 L/yr - ₹4.5 L/yr |
|
HR Executive
6
salaries
| ₹2.7 L/yr - ₹4.5 L/yr |
|
Account Assistant
6
salaries
| ₹2.5 L/yr - ₹4.4 L/yr |
Patel Infrastructure
CTS Consulting & Technical Support
J K Fenner
Saudi Binladin Group
- Home >
- Interviews >
- Indus Projects Interview Questions >
- Indus Projects Civil Site Engineer Interview Questions
