Upload Button Icon Add office photos

Inductotherm

Compare button icon Compare button icon Compare

Filter interviews by

Inductotherm Interview Questions, Process, and Tips

Updated 20 Sep 2024

Top Inductotherm Interview Questions and Answers

View all 9 questions

Inductotherm Interview Experiences

Popular Designations

9 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - Technical 

(7 Questions)

  • Q1. First angle and third angle symbol
  • Ans. 

    First angle and third angle symbols are used in engineering drawings to indicate the orientation of the views.

    • First angle projection is commonly used in Europe and Asia, where the top view is placed below the front view.

    • Third angle projection is commonly used in North America, where the top view is placed above the front view.

    • The symbol for first angle projection is a triangle with the number 1 inside, while the symbol...

  • Answered by AI
  • Q2. Welding symbols
  • Q3. Types of gears and bearings
  • Ans. 

    Types of gears include spur, helical, bevel, worm, rack and pinion. Types of bearings include ball, roller, plain, and fluid bearings.

    • Types of gears: spur, helical, bevel, worm, rack and pinion

    • Types of bearings: ball, roller, plain, fluid

  • Answered by AI
  • Q4. Four Heat treatment process name
  • Ans. 

    Four common heat treatment processes are annealing, quenching, tempering, and normalizing.

    • Annealing involves heating the material to a specific temperature and then slowly cooling it to relieve internal stresses and increase ductility.

    • Quenching is a rapid cooling process used to harden materials by forming a martensitic structure.

    • Tempering is a heat treatment process that involves reheating the quenched material to a s...

  • Answered by AI
  • Q5. Welding,brazing and soldering difference between them.
  • Ans. 

    Welding joins two metal pieces by melting them together, brazing joins them with a filler metal at lower temperatures, and soldering joins them with an even lower melting point filler metal.

    • Welding involves melting the base metals and adding a filler material to create a strong joint, typically at high temperatures.

    • Brazing uses a filler metal with a melting point above 450°C but below the melting point of the base meta...

  • Answered by AI
  • Q6. CSK bolt drawing
  • Q7. Tpi and bsp dull form

Top Inductotherm Design Engineer Interview Questions and Answers

Q1. How many material do you know ? And why we use them in specific?
View answer (1)

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2024. There were 4 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About power electronics
  • Q2. Like, SCR, IGBT,
Round 2 - One-on-one 

(2 Questions)

  • Q1. PLC, DCS, temparature sensor ,
  • Q2. About induction furnace how its work,
Round 3 - One-on-one 

(2 Questions)

  • Q1. About furnace, about existing company and their product, wanted to know that why i am switching?
  • Q2. Personal information
Round 4 - HR 

(2 Questions)

  • Q1. Present company, why i am switching, got another post offer with more salary,
  • Q2. Salary negotiations.

Senior Sales Engineer Interview Questions asked at other Companies

Q1. What is MCCB And MCCB KA ratings?diffrence Between MCB and ELCB?
View answer (3)

Apprentice Interview Questions & Answers

user image Zala Rahul G

posted on 20 Sep 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

It was good. I gave my best

Round 2 - HR 

(4 Questions)

  • Q1. Tell me about yourself?
  • Q2. Are you comfortable with the job?
  • Q3. Questions related to fields
  • Q4. Are you comfortable with timing?
  • Ans. 

    Yes, I am comfortable with timing and have experience managing deadlines effectively.

    • I have a proven track record of meeting project deadlines in my previous roles.

    • I am skilled at prioritizing tasks and managing my time efficiently.

    • I am comfortable working under pressure and thrive in fast-paced environments.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Inductotherm Apprentice interview:
  • Engineering
  • job related
  • about company

Apprentice Interview Questions asked at other Companies

Q1. 3. What do you know about artificial intelligence and Machine learning?
View answer (2)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Personal past experiences

Deputy Manager 1 Interview Questions asked at other Companies

Q1. What is the difference between thermal power plant and hydro power plant
View answer (5)

Inductotherm interview questions for popular designations

 Design Engineer

 (2)

 Apprentice

 (1)

 Area Sales Head

 (1)

 Deputy Manager 1

 (1)

 Import Purchase

 (1)

 Mechanical Engineer

 (1)

 Senior Sales Engineer

 (1)

 Technician

 (1)

Technician Interview Questions & Answers

user image IMRAN Seikh

posted on 1 Dec 2023

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Which company to work before?
  • Q2. Salary how much?
  • Q3. Tell me about Tomar's work experience.
  • Ans. 

    Tomar has extensive work experience in the field of technology.

    • Tomar has worked as a technician for 10 years.

    • He has experience in troubleshooting and repairing various electronic devices.

    • Tomar has worked with different software and hardware systems.

    • He has also trained and mentored junior technicians.

    • Tomar has a proven track record of delivering high-quality work within deadlines.

  • Answered by AI
Round 3 - Group Discussion 

Gender Sensitivity is a gender equality concern?
A.I. in work: how it is going to change the future of workspace?
Cryptocurrency/ Bitcoin
Discuss the quote by Mark Zuckerburg “We don’t make services to make more money, we make money to make better services”.
What do you think about ‘aging gracefully’? How can we change the trend of people going for cosmetic surgeries?
Is Dependence on Computers a Good Thing?
Terrorism in India
How effective are Indian B-schools?
Will E-Commerce ruin retail stores?
Are Peace and Non-Violence Outdated Concepts?
Effect of demonetization on common Citizen vis-a-vis black money holders
Discuss Social Media’s impact on teenagers.
Are men compromising their careers for the family?
Are nuclear families a blessing in disguise?
Artificial Intelligence is taking over the human workforce.
Is our Political System the Reason for our Backwardness?
#Me Too Campaign
E-Learning: A Substitute for Classroom Learning?
Work-Life Balance and Need for Spirituality.
The decline in open spaces may lead to negative tendencies in children.
Also Read: A preparation guide for campus placements

Current Affairs Topics for GD
Impact of COVID on the global economy
Importance of public health post-COVID
India’s COVID-19 Battle vs developed countries
New world order – social distancing?
Are we a part of a virtual world post-COVID?
The lockdown caused a dent in the Indian economy
Citizenship Amendment Act
How will the Abrogation of Article 370 improve the situation in Kashmir?
COVID lockdown exposed social and gender inequality in the country
Media Freedom – Is it important?
Will the Amendment Bill benefit companies?
Can electric vehicles be a success in India?
Significance of Data Privacy
Discuss Union Budget India 2019-2020
The implication of State Assembly elections at the national level?
What is the significance of the Statue of Unity?
Will Denuclearisation Instill World Peace?
Aadhaar mandatory – for or against
Also Read: GD Topics for Placement Drives

Business and Economics
What are your views on YONO?
Business Lobbying in India
India vs China – A better economy in 2050?
Importance of an MBA in a successful business
How is Bitcoin affecting the global economy?
Business and Technology go hand in hand
AI is the future of business
Is brand presence more important than good services?
Future of the Banking Sector in India
ASL Topics for School Students
Group Discussion Topics for Students
How has COVID affected the Indian students?
Freedom: Is It a Myth?
Will the 5 Trillion Indian Economy Ever Be A Success?
Urban v/s Rural India
Education System of India
Death Penalty for Crime Against Women
Condition of Indian States
Sanitization of Poor
Globalization – Effects on India
Group Discussion Topics for MBA
Impact of COVID on Education
Peer Pressure
Carbon tax
Digital Detox
Formal degrees are things of the past
Impact of COVID-19 on the education sector
The Future of Work
Carbon footprint
Fame is a double-edged sword
National Education Policy 2020
National Health ID
E-learning – Pros & Challenges
Impact of Coronavirus/COVID-19 on Environment
How prepared is India to tackle the COVID-19 outbreak?
Data Localisation – Benefits & Challenges
Impact of Technology on Jobs
#Metoo Campaign
Crypto Currency/ Bitcoin
Latest Group Discussion Topics
Impact of COVID-19 on Mental Health
Taliban Rule in Afghanistan- Impact on India
How to prevent COVID Third wave in India?
Blended learning – The new normal
Money or Happiness – Can money make us happy?
The rise of the Gig economy
Censorship of OTT platforms – Right or Wrong?
The importance of netiquette in the digital age
Impact of COVID-19 on the Indian Economy
India’s COVID-19 vaccination program
Impact of COVID-19 on the Indian Economy
India’s COVID-19 vaccination program
How can we prevent the next pandemic?
Should anonymity be allowed on the internet?
Formal degrees are things of the past
Open book exams – Pros, Cons & Challenges
Lessons for the World from the COVID-19 pandemic
Impact of Coronavirus/COVID-19 on Environment
How prepared is India to tackle the COVID-19 outbreak?
Fit India Movement
Can India become a $5 trillion economy by 2024?
The menace of Eve-teasing
Mental Illness in India
Importance of Group Discussion
Importance of Group Discussion
Importance of Group Discussion
You must be wondering what is the need to group discussion. Here are some points to establish the importance of a group discussion:

Group discussion or GD aims to test the interpersonal skills, oratory skills, and leadership skills of candidates
It is held as an aid to understanding different perspectives on a particular topic and gaining in-depth knowledge about the same
It evaluates the communication skills and manner of candidates
Your arguments around the given group discussion topics also help the examinee to understand your open-mindedness and thinking process
It evaluates your rigidity towards accepting other person’s point of view
Examines your analytical abilities, time management, confidence, and social conduct.
Having established the need for GD, let us move forward and comprehend the Important group discussion topics and evaluation process.

Also Read: 60 Extempore Topics

Evaluation Criteria for Group Discussion Topics
There are four major areas of evaluation, based on which the candidates are judged. These criteria include:

Subject Knowledge: Speaking without knowledge would not be a smart thing to do in a GD. One must only speak about things that make sense and stand relevant to the group discussion topic. Creating a list, pertinent enough to be presented in front of the group can be prepared by the candidates. The more you are aware of a wide range of topics, the more points you can contribute to the discussion.
Listening Skills: It is one of the most important aspects of a GD. Unless a candidate has listening skills, they will not be able to pick up the thread. Also, listening to your counterparts will give you an idea for the next elocution. A person with this skill easily catches the panel member’s eye.
Oral Communication Skills: Impressive oral communication skills supported by the right facts, directions, and throw of language can make you lead the GD game. The confidence and conviction with which the candidate speaks is a major part of the judging criterion.
Clarity of thought and expression: Outcasting your points loud and clear leaves an excellent impression on the judges. The act of making yourself clear to the audience and judging committee with conviction is achieved only when there is clarity of thought and expression. Phonetic accuracy for proper modulation of voice is also an important factor during GD. Thus, make sure that you are not speaking meekly.
What is the Difference Between Extempore and GD?
Importance of Group Discussion
Difference Between Extempore and GD
These were some popular group discussion topics that are common for recruitment and admission processes. Hopefully, this blog has given you a better insight into GDs. For further assistance on how to prepare an application to universities abroad, seek help from the Leverage Edu experts to make your dream come true. Our mentors will help you draft a perfect application and guide you with other admission related rounds.


Share this article
Leave a Reply
Your contact details will not be published. Required fields are marked *

What are your thoughts ?

Interview Preparation Tips

Interview preparation tips for other job seekers - To obtain a full time position, in which can utilize skills and abilities.
Abilities can learn quick on any type of job that can or is assigned and
willing to try new types of jobs.

Technician Interview Questions asked at other Companies

Q1. What kinds of pipe used for hot and cold water supply ?
View answer (8)

I applied via Referral and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What are the incoterms?
  • Ans. 

    Incoterms are a set of standardized trade terms used in international commercial transactions.

    • Incoterms define the responsibilities of buyers and sellers in terms of transportation, insurance, and customs clearance.

    • There are 11 Incoterms, including EXW, FOB, CIF, and DDP.

    • The choice of Incoterm affects the cost, risk, and responsibility of both parties.

    • Incoterms are regularly updated to reflect changes in the global tra...

  • Answered by AI
  • Q2. Why should we hire you?

Interview Preparation Tips

Interview preparation tips for other job seekers - Get ready to be questioned from your CV and interview form.

Import Purchase Interview Questions asked at other Companies

Q1. What are the incoterms?
View answer (1)

Jobs at Inductotherm

View all

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(8 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. Where do you see yourself in 5 years?
  • Q7. What are your strengths and weaknesses?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Hi Sir my self Rahul Varma .
I am interested sir please follow me .

Mechanical Engineer Interview Questions asked at other Companies

Q1. What we need to do if pressure valve fail in boiler
View answer (8)

I applied via Recruitment Consultant and was interviewed before Oct 2019. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. All basic questions related to mechanics and geometric tolerances, about motor pump and pneumatics selection.
  • Q2. How to change rpm?
  • Ans. 

    RPM can be changed by adjusting the speed of the motor or by using a gearbox.

    • Adjust the voltage or frequency of the power supply to the motor

    • Use a variable frequency drive to control the motor speed

    • Use a gearbox to change the speed of the output shaft

    • Change the size of the pulleys or gears in the system

    • Use a different motor with a different speed rating

  • Answered by AI
  • Q3. Material use in gears?
  • Ans. 

    Gears can be made of various materials depending on the application and requirements.

    • Common materials include steel, cast iron, bronze, and plastic.

    • Steel gears are strong and durable, but can be noisy.

    • Cast iron gears are also strong and durable, but are quieter than steel.

    • Bronze gears are used in applications where low noise and high strength are required.

    • Plastic gears are lightweight and can be used in applications wh...

  • Answered by AI
  • Q4. How many material do you know ? And why we use them in specific?
  • Ans. 

    There are numerous materials used in engineering, each with unique properties and applications.

    • Metals: strong and durable, used in construction and machinery

    • Polymers: lightweight and flexible, used in packaging and consumer goods

    • Ceramics: heat-resistant and hard, used in electronics and construction

    • Composites: combination of materials, used in aerospace and sports equipment

    • Why we use them in specific: based on their pr...

  • Answered by AI
  • Q5. Draw 3rd angle & 1st angle view
  • Ans. 

    To draw 3rd angle & 1st angle view, first understand the projection theory and then follow the conventions of each angle view.

    • Understand the projection theory and conventions of each angle view

    • Use proper scale and dimensions

    • Label all the important features

    • Show hidden lines and surfaces

    • Use appropriate line types and thickness

    • Check for accuracy and completeness

    • Revise and refine the drawing as needed

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go with good graphical resume..

Top Inductotherm Design Engineer Interview Questions and Answers

Q1. How many material do you know ? And why we use them in specific?
View answer (1)

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

Interview Questionnaire 

3 Questions

  • Q1. Technical and personal interview
  • Q2. Regarding induction furnace and competitors
  • Q3. Documentation and certificates verification

Interview Preparation Tips

Round: Resume Shortlist
Experience: Experience

Round: Test
Experience: Technical test

Area Sales Head Interview Questions asked at other Companies

Q1. What are the clusters of cement supply of your area
View answer (1)

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Hr asked are looking new job
  • Ans. I'm asking yes I'm searching new job
  • Answered Anonymously
  • Q2. Salary details , like pata slip and bank statement

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical questions ,like manufacturer line , related to machine assembly and knowledge of tools and

Inductotherm Interview FAQs

How many rounds are there in Inductotherm interview?
Inductotherm interview process usually has 2-3 rounds. The most common rounds in the Inductotherm interview process are HR, Resume Shortlist and Technical.
How to prepare for Inductotherm interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Inductotherm. The most common topics and skills that interviewers at Inductotherm expect are Service Engineering, Electricals, Electronics Engineering, Maintenance and customer care.
What are the top questions asked in Inductotherm interview?

Some of the top questions asked at the Inductotherm interview -

  1. How many material do you know ? And why we use them in specif...read more
  2. Welding,brazing and soldering difference between th...read more
  3. What are the incoter...read more

Tell us how to improve this page.

Inductotherm Interview Process

based on 8 interviews

Interview experience

4.8
  
Excellent
View more

Interview Questions from Similar Companies

Electrotherm Interview Questions
4.2
 • 33 Interviews
PMT Machines Interview Questions
3.5
 • 19 Interviews
Trelleborg Interview Questions
4.0
 • 18 Interviews
Escon Elevators Interview Questions
4.0
 • 13 Interviews
MITA Interview Questions
3.5
 • 12 Interviews
View all

Inductotherm Reviews and Ratings

based on 128 reviews

4.0/5

Rating in categories

3.5

Skill development

3.5

Work-life balance

3.6

Salary

4.3

Job security

3.5

Company culture

3.2

Promotions

3.7

Work satisfaction

Explore 128 Reviews and Ratings
Automation Engineer

Pune

3-8 Yrs

Not Disclosed

Software Developer For Sanand, Ahmedabad

Sanand

3-4 Yrs

₹ 3-3.5 LPA

Explore more jobs
Service Engineer
46 salaries
unlock blur

₹2.4 L/yr - ₹7.2 L/yr

Senior Engineer
33 salaries
unlock blur

₹4.8 L/yr - ₹11 L/yr

Engineer
20 salaries
unlock blur

₹2.5 L/yr - ₹6.4 L/yr

Purchase Engineer
17 salaries
unlock blur

₹1.8 L/yr - ₹6 L/yr

Design Engineer
14 salaries
unlock blur

₹2.2 L/yr - ₹4.3 L/yr

Explore more salaries
Compare Inductotherm with

Electrotherm

4.2
Compare

MEGATHERM ELECTRONICS

2.8
Compare

Escon Elevators

4.0
Compare

Trelleborg

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview