Filter interviews by
I applied via Naukri.com and was interviewed in Nov 2020. There were 5 interview rounds.
2-stroke engines complete a power cycle in one revolution, while 4-stroke engines complete it in two revolutions.
2-stroke engines have a simpler design and are lighter than 4-stroke engines.
2-stroke engines have a higher power-to-weight ratio than 4-stroke engines.
4-stroke engines are more fuel-efficient and have a longer lifespan than 2-stroke engines.
Examples of 2-stroke engines include chainsaws and dirt bikes, whil...
Otto cycle is used in gasoline engines while diesel cycle is used in diesel engines.
Otto cycle has constant volume combustion while diesel cycle has constant pressure combustion.
Otto cycle uses spark ignition while diesel cycle uses compression ignition.
Otto cycle has higher thermal efficiency than diesel cycle.
Diesel cycle has higher compression ratio than Otto cycle.
Examples of engines using Otto cycle are gasoline c...
Drawing is the process of creating a design or plan, while bending is the process of shaping a material by applying force.
Drawing involves creating a visual representation of an object or structure, while bending involves physically altering the shape of a material.
Drawing is typically done on paper or computer software, while bending is done using tools such as a press brake or tube bender.
Drawing is often used in the...
QA is process-oriented and focuses on preventing defects, while QC is product-oriented and focuses on identifying defects.
QA involves planning, designing, and implementing processes to ensure quality standards are met.
QC involves testing and inspecting products to identify defects and ensure they meet quality standards.
QA is proactive, while QC is reactive.
QA is a preventive measure, while QC is a corrective measure.
Ex...
PPAP (Production Part Approval Process) has 5 stages to ensure quality of parts produced.
Stage 1: Planning and defining the program
Stage 2: Product design and development
Stage 3: Process design and development
Stage 4: Product and process validation
Stage 5: Ongoing production, use, and feedback
There are several types of welding, including MIG, TIG, Stick, and Flux-Cored welding.
MIG welding uses a wire electrode and a shielding gas to join two pieces of metal together.
TIG welding uses a tungsten electrode and a filler metal to create a strong bond between two metals.
Stick welding uses a consumable electrode coated in flux to create an arc and join two metals together.
Flux-Cored welding uses a wire electrode w...
MIG welding is a process of joining metals using a consumable wire electrode and shielding gas.
MIG stands for Metal Inert Gas welding
It is commonly used in automotive and manufacturing industries
Produces high-quality welds with minimal splatter
Requires a constant voltage power source and a wire feeder
Can be used on a variety of metals including steel, aluminum, and stainless steel
The 7QC tools are a set of techniques used for quality control and improvement.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Flowcharts
Cause-and-effect diagrams
Top trending discussions
posted on 10 Jan 2025
I applied via Company Website and was interviewed in Dec 2024. There was 1 interview round.
Blow hole , dent , crack , flash mark , step mark
I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.
Quality Engineers need to have strong skills in process improvement and problem-solving.
Strong understanding of quality control processes
Ability to analyze data and identify areas for improvement
Experience with root cause analysis techniques
Knowledge of statistical tools and methods
Effective communication skills to work with cross-functional teams
Team management involves leading, motivating, and coordinating a group of individuals to achieve common goals.
Effective communication is key in team management
Setting clear goals and expectations for team members
Providing support and resources to help team members succeed
Recognizing and rewarding team members for their contributions
Resolving conflicts and addressing issues within the team
Encouraging collaboration and f
Rules company is a term used to describe the set of guidelines and regulations that a company follows in order to ensure quality and compliance.
Rules company refers to the policies, procedures, and standards that govern the operations of a company.
These rules are put in place to ensure consistency, quality, and compliance with regulations.
Examples of rules company include ISO standards, FDA regulations, and company-spe
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
The 7 QC tools are a set of basic statistical tools used for quality control and improvement in manufacturing and service industries.
Check sheet: Used to collect and organize data in a systematic way.
Histogram: Represents data distribution visually.
Pareto chart: Helps identify the most significant factors contributing to a problem.
Cause-and-effect diagram (Ishikawa or fishbone diagram): Identifies potential causes of a...
5S is a methodology used to organize a workplace for efficiency and effectiveness by identifying, sorting, setting in order, shining, and sustaining.
Sort: Remove unnecessary items from the workplace
Set in order: Organize remaining items in a logical manner
Shine: Clean and inspect the workplace regularly
Standardize: Establish procedures and schedules for maintaining the first 3 S's
Sustain: Ensure the practices are consi...
4M is a method used in quality management to identify and address potential issues in a process.
4M stands for Man, Machine, Material, and Method.
It is used to analyze and improve processes by considering the impact of these four factors.
For example, in manufacturing, 4M can help identify if a quality issue is due to human error, machine malfunction, material defects, or the method of production.
TPM stands for Total Productive Maintenance, a proactive approach to maintenance involving all employees to improve equipment effectiveness.
TPM focuses on maximizing equipment effectiveness through proactive maintenance
The pillars of TPM include autonomous maintenance, planned maintenance, quality maintenance, focused improvement, early equipment management, and training & education
Example: Implementing autonomous main...
JH stands for Job Hazard Analysis, a process used to identify and mitigate potential hazards in the workplace.
JH is a systematic process for identifying potential hazards in a job task or process.
It involves breaking down the job into steps, identifying potential hazards at each step, and implementing controls to mitigate those hazards.
Examples of hazards that may be identified through JH include exposure to harmful ch...
I applied via Company Website and was interviewed in Aug 2024. There were 2 interview rounds.
Department of quality (PDI Quality)
Pre dispatch audit , testing , kitting etc.
Standard online aptitude tests with some written questions
Group assessment day, lasted 4 hours, group tasks followed by one-on-one
I applied via Walk-in and was interviewed in Apr 2023. There were 3 interview rounds.
I applied via Referral and was interviewed in Sep 2023. There was 1 interview round.
based on 4 interviews
Interview experience
based on 19 reviews
Rating in categories
Senior Engineer
217
salaries
| ₹3.2 L/yr - ₹7.5 L/yr |
Engineer
188
salaries
| ₹2.1 L/yr - ₹6 L/yr |
Assistant Manager
159
salaries
| ₹4.4 L/yr - ₹10.1 L/yr |
Production Engineer
124
salaries
| ₹2.2 L/yr - ₹5.4 L/yr |
Quality Engineer
102
salaries
| ₹1.6 L/yr - ₹5 L/yr |
Tata Motors
Mahindra & Mahindra
Maruti Suzuki
Bharat Forge