Filter interviews by
I applied via LinkedIn and was interviewed in Oct 2021. There were 2 interview rounds.
What is your greatest Strength
Top trending discussions
posted on 28 Dec 2023
I applied via Approached by Company and was interviewed before Dec 2022. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Jan 2021. There were 2 interview rounds.
About store procedures and systems
Planning in inventory management involves forecasting demand, setting inventory levels, and replenishing stock.
Forecasting demand based on historical sales data and market trends
Setting inventory levels to balance customer demand and cost of holding inventory
Replenishing stock in a timely manner to avoid stockouts and overstocking
Using inventory management software to track inventory levels and automate replenishment
Re...
I applied via Newspaper Ad and was interviewed before Jul 2021. There were 3 interview rounds.
To measure a full truck load of sand, calculate the volume in cubic feet (cft) by multiplying the length, width, and height of the truck bed.
Measure the length, width, and height of the truck bed
Multiply the three measurements to get the volume in cubic feet (cft)
For example, if the truck bed is 10 feet long, 5 feet wide, and 3 feet high, the volume would be 150 cubic feet (10 x 5 x 3)
Ensure the truck is loaded evenly
Pls tell me one of your achievements in your last employer ?
I applied via Company Website and was interviewed before Aug 2022. There were 2 interview rounds.
I applied via Campus Placement and was interviewed before May 2020. There were 3 interview rounds.
My favourite subject is Mathematics.
I enjoy solving complex problems and equations.
I find it fascinating how mathematical concepts can be applied in various fields.
I appreciate the logical and analytical thinking required in Mathematics.
I have excelled in Mathematics throughout my academic career.
I have also participated in Mathematics Olympiads and competitions.
I appeared for an interview in Aug 2019.
There are various types of structures, including buildings, bridges, dams, tunnels, and towers.
Structures can be classified based on their purpose, design, and materials used.
Buildings can be further classified into residential, commercial, and industrial structures.
Bridges can be classified into beam, arch, suspension, and cable-stayed bridges.
Dams can be classified into gravity, arch, buttress, and embankment dams.
Tu...
Density is the measure of mass per unit volume of a substance.
It is a physical property of matter.
It is calculated by dividing the mass of a substance by its volume.
Units of density include kg/m³, g/cm³, and lb/ft³.
Density can be used to identify substances and determine their purity.
For example, gold has a density of 19.3 g/cm³, while aluminum has a density of 2.7 g/cm³.
There are two types of density construction: compacted and loose.
Compacted density construction involves compressing the material to increase its density, such as in road construction.
Loose density construction involves leaving the material in its natural state, such as in landscaping.
The type of density construction used depends on the intended use of the material and the desired level of compaction.
Other factors that...
Tests for construction joints include visual inspection, water tightness test, and load transfer test.
Visual inspection to check for proper joint alignment and sealant application
Water tightness test to ensure no water leakage through the joint
Load transfer test to verify the joint can handle the intended load
Other tests may include pull-out test, shear test, and compression test
Testing frequency and methods may vary d...
I applied via Walk-in and was interviewed in Oct 2021. There were 2 interview rounds.
I appeared for an interview in Aug 2017.
posted on 14 Nov 2017
I appeared for an interview before Nov 2016.
Leveling is the process of determining the height or elevation of a point or surface relative to a reference point.
Leveling is commonly used in civil engineering and construction to ensure accurate measurements and proper alignment.
It involves the use of leveling instruments such as a level, theodolite, or laser level.
The process typically includes setting up benchmarks or reference points, taking readings at different...
The diameter of six mm refers to the size or measurement of a circular object that is six millimeters in width.
The diameter is the distance across the center of a circle, passing through the circumference.
A six mm diameter can be visualized as a circle with a width of six millimeters.
It is a common measurement used in various industries, including engineering and manufacturing.
For example, a six mm diameter steel rod w...
LEP stands for Load Equivalent Factor for Pavement design.
LEP is used in pavement design to determine the load-carrying capacity of the pavement.
The formula for LEP depends on the specific design method being used.
For example, in the AASHTO design method, LEP is calculated using the formula: LEP = (ESAL/1000) * (1 + 0.003 * (T - 3))
Here, ESAL is the Equivalent Single Axle Load and T is the pavement design period in yea...
based on 4 reviews
Rating in categories
Site Engineer
208
salaries
| ₹2.7 L/yr - ₹7.2 L/yr |
Civil Site Engineer
178
salaries
| ₹2.3 L/yr - ₹8.1 L/yr |
Quantity Surveyor
54
salaries
| ₹3 L/yr - ₹7.2 L/yr |
Senior Planning Engineer
53
salaries
| ₹5 L/yr - ₹8.6 L/yr |
Mechanical Engineer
49
salaries
| ₹2 L/yr - ₹6.8 L/yr |
L&T Construction
Simplex Infrastructures
ITD Cementation India
Ashoka Buildcon