Add office photos
Filter interviews by
Gem Engserv Billing Engineer Interview Questions, Process, and Tips
Gem Engserv Billing Engineer Interview Experiences
1 interview found
Selected
I applied via Referral and was interviewed before May 2023. There was 1 interview round.
(5 Questions)
- Q1. How do you make RMC reconciliation?
- Ans.
RMC reconciliation involves comparing the quantity of materials ordered with the quantity used in construction to ensure accuracy.
Collect all the data related to RMC (Ready Mix Concrete) orders and deliveries.
Compare the quantity of RMC ordered with the quantity actually used in construction.
Identify any discrepancies and investigate the reasons behind them.
Adjust the records accordingly to ensure accurate billing and
- Q2. How to calculate bbs ?
- Ans.
BBS (Bar Bending Schedule) is calculated by determining the quantity of steel reinforcement required for a particular concrete structure.
Calculate the total length of bars required for each diameter and type of reinforcement.
Determine the number of bars required for each diameter and type of reinforcement.
Calculate the total weight of bars required for each diameter and type of reinforcement.
Prepare a detailed schedule...
- Q3. How to check paint measurements?
- Ans.
Paint measurements can be checked using a paint thickness gauge to ensure compliance with specifications.
Use a paint thickness gauge to measure the thickness of the paint layer.
Compare the measured thickness with the specified thickness in the project specifications.
Ensure that the paint thickness is uniform across the surface.
Repeat the measurements at multiple points to ensure accuracy.
Adjust the paint application if...
- Q4. How do you find extra items for WO amendment?
- Ans.
Extra items for WO amendment can be found by reviewing project specifications, consulting with stakeholders, conducting site visits, and analyzing previous change orders.
Review project specifications for any missed items or changes
Consult with stakeholders such as architects, engineers, and contractors for input
Conduct site visits to identify any additional work required
Analyze previous change orders to see if any item
- Q5. How do you ConsiderJMR is right or wrong?
- Ans.
Consider JMR based on project specifications, quantities, rates, and market conditions.
Review project specifications to ensure accurate billing
Verify quantities of materials and work done
Check rates for labor, materials, and equipment
Consider market conditions for pricing accuracy
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Billing Engineer Interview Questions & Answers
The Louis Berger Group
Anonymous
posted on 14 Oct 2023
Selected
I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.
(1 Question)
- Q1. About salary and benefits
(4 Questions)
- Q1. About my key activity and responsibility
- Q2. Process of variation
- Ans.
Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.
Variations are changes to the original scope, cost, or schedule of a project
Variations must be documented and approved by the relevant parties
The impact of variations on project budget and timeline must be analyzed
Examples of variations include design changes, unforeseen site conditions, and client requests
- Q3. Details about TDS
- Q4. Details about NS items
Interview Preparation Tips
- Contact
- Running bill
- Escalations
- Variation
- Ns items
I applied via Recruitment Consulltant and was interviewed before Apr 2021. There was 1 interview round.
(2 Questions)
- Q1. Rate analysis for plaster
- Ans.
Rate analysis for plaster involves calculating the cost of materials, labor, and equipment required for plastering a specific area.
Determine the area to be plastered
Calculate the quantity of materials required (cement, sand, water)
Determine the cost of materials per unit
Calculate the cost of labor per unit area
Include the cost of equipment and tools used
Add all costs to get the total cost of plastering
Example: For plas...
- Q2. BBS for steel and BOQ for building items
- Ans.
BBS is Bar Bending Schedule used for steel reinforcement and BOQ is Bill of Quantities used for building items.
BBS provides details of reinforcement steel required for construction.
BOQ lists all the materials and quantities required for construction.
BBS is used for steel reinforcement in structures like columns, beams, slabs, etc.
BOQ is used for building items like bricks, cement, sand, etc.
Both BBS and BOQ are importa...
Interview Preparation Tips
Billing Engineer Interview Questions & Answers
The Louis Berger Group
Anonymous
posted on 14 Oct 2023
Selected
I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.
(1 Question)
- Q1. About salary and benefits
(4 Questions)
- Q1. About my key activity and responsibility
- Q2. Process of variation
- Ans.
Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.
Variations are changes to the original scope, cost, or schedule of a project
Variations must be documented and approved by the relevant parties
The impact of variations on project budget and timeline must be analyzed
Examples of variations include design changes, unforeseen site conditions, and client requests
- Q3. Details about TDS
- Q4. Details about NS items
Interview Preparation Tips
- Contact
- Running bill
- Escalations
- Variation
- Ns items
I applied via Recruitment Consulltant and was interviewed before Apr 2021. There was 1 interview round.
(2 Questions)
- Q1. Rate analysis for plaster
- Ans.
Rate analysis for plaster involves calculating the cost of materials, labor, and equipment required for plastering a specific area.
Determine the area to be plastered
Calculate the quantity of materials required (cement, sand, water)
Determine the cost of materials per unit
Calculate the cost of labor per unit area
Include the cost of equipment and tools used
Add all costs to get the total cost of plastering
Example: For plas...
- Q2. BBS for steel and BOQ for building items
- Ans.
BBS is Bar Bending Schedule used for steel reinforcement and BOQ is Bill of Quantities used for building items.
BBS provides details of reinforcement steel required for construction.
BOQ lists all the materials and quantities required for construction.
BBS is used for steel reinforcement in structures like columns, beams, slabs, etc.
BOQ is used for building items like bricks, cement, sand, etc.
Both BBS and BOQ are importa...
Interview Preparation Tips
Gem Engserv Interview FAQs
Tell us how to improve this page.
Gem Engserv Interviews By Designations
- Gem Engserv Assistant Manager Interview Questions
- Gem Engserv Assistant Manager Safety Interview Questions
- Gem Engserv Billing Engineer Interview Questions
- Gem Engserv Contract Engineer Interview Questions
- Gem Engserv EHS Officer Interview Questions
- Gem Engserv Finishing Manager Interview Questions
- Gem Engserv MEP Supervisor Interview Questions
- Gem Engserv Quality Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Planning & Billing Engineer Interview Questions
- Senior Billing Engineer Interview Questions
- Billing Executive Interview Questions
- Site & Billing Engineer Interview Questions
- Estimation & Billing Engineer Interview Questions
- Medical Billing Executive Interview Questions
- Civil Site & Billing Engineer Interview Questions
- Billing Manager Interview Questions
- Show more
Gem Engserv Billing Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Gem Engserv Billing Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Assistant Manager
55
salaries
|  ₹3.6 L/yr - ₹8.5 L/yr |
|
Senior Engineer
24
salaries
| ₹5.2 L/yr - ₹8.5 L/yr |
|
Safety Officer
22
salaries
| ₹3.3 L/yr - ₹6.5 L/yr |
|
Assistant Manager - MEP
18
salaries
| ₹5 L/yr - ₹9.2 L/yr |
|
Civil Engineer
16
salaries
| ₹3.5 L/yr - ₹7.2 L/yr |
TCS
Wipro
Infosys
Tech Mahindra
- Home >
- Interviews >
- Gem Engserv Interview Questions >
- Gem Engserv Billing Engineer Interview Questions
