Upload Button Icon Add office photos

Flowserve

Compare button icon Compare button icon Compare

Filter interviews by

Flowserve Assistant Engineer Interview Questions and Answers

Updated 13 Mar 2024

Flowserve Assistant Engineer Interview Experiences

2 interviews found

Assistant Engineer Interview Questions & Answers

user image VISHNU PRASAD C

posted on 13 Mar 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is cavitation
  • Ans. 

    Cavitation is the formation of vapor bubbles in a liquid due to rapid changes in pressure, which can cause damage to equipment.

    • Occurs when the pressure of a liquid drops below its vapor pressure, causing bubbles to form and collapse

    • Can cause erosion and damage to pumps, propellers, and other equipment

    • Common in high-speed fluid flow applications like pumps, turbines, and propellers

  • Answered by AI
  • Q2. Cavitation is when vapour falls below vapor pressur and comes back
Round 2 - HR 

(2 Questions)

  • Q1. Why u left previous job
  • Q2. Because i wanted to work in a MNC
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. What you know by Cv (Co-efficient of friction)
  • Ans. 

    Cv is the coefficient of friction, a dimensionless value that represents the ratio of the force of friction between two bodies in contact to the force pressing them together.

    • Cv is used to quantify the frictional characteristics of a material or surface.

    • It is calculated by dividing the force of friction by the normal force acting between the two surfaces.

    • A higher Cv value indicates a higher frictional force between the ...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. What is unit of flow rate ?
  • Ans. 

    The unit of flow rate is typically measured in volume per unit time, such as liters per minute or cubic meters per second.

    • Flow rate is commonly measured in units like liters per minute (L/min), cubic meters per second (m^3/s), or gallons per hour (gph).

    • It represents the amount of fluid passing through a specific point in a given time period.

    • Flow rate can also be expressed in terms of mass per unit time, such as kilogra...

  • Answered by AI

Assistant Engineer Interview Questions Asked at Other Companies

asked in Randstad
Q1. 1.Define the term capacitance & inductance 2.what is Rectifie ... read more
Q2. Why do we take only 1 set of cube sample at a casting of concrete ... read more
Q3. How do we take slump for casting of concrete and what if when we ... read more
asked in TCE
Q4. What are the provisions you check for, designing a beam/column ac ... read more
Q5. What is the 5s.and how is the important of a industry??

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Do trains have differential. How does a train run on curvature.
  • Ans. 

    Yes, trains do not have differentials. They run on curvature by allowing the wheels on the outer side of the curve to travel a longer distance than the wheels on the inner side.

    • Trains do not have differentials like cars do, as each wheel is connected to the same axle and rotates at the same speed.

    • To navigate curves, trains rely on the principle of coning, where the wheels are slightly tapered to allow the outer wheel t...

  • Answered by AI

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain Compilation process steps?
  • Ans. 

    Compilation process involves several steps to convert source code into executable code.

    • Preprocessing: Includes header file inclusion, macro expansion, and conditional compilation.

    • Compilation: Translates source code into assembly code.

    • Assembly: Converts assembly code into machine code.

    • Linking: Combines object files and libraries to create an executable file.

    • Loading: Loads the executable file into memory and prepares it

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well prior the interview, revise all the basic concepts of Embedded C and MATLAB if you have applied for embedded systems.

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were related to the post John Deere were offering to candidates. For me it was Diagnostics Author position.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be aware that answer as simple as you can.
If you don't know the answer don't try to attempt simply say that you don't know and assure interviewer that if you ll get a chance you will definitely answer that.

Be optimistic and attentive.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me about yourself ?
  • Q2. About your work experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence , good energy level

I applied via Company Website and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. MOTOR AMD PANEL SWITCHGEAR ERECTION IN OIL AND GAS FIELD
  • Ans. 

    Motor and panel switchgear erection in oil and gas field

    • Experience in installation and maintenance of motor and panel switchgear in oil and gas field

    • Knowledge of safety regulations and procedures in hazardous environments

    • Ability to read and interpret technical drawings and schematics

    • Familiarity with testing and commissioning procedures

    • Experience in troubleshooting and resolving electrical issues

    • Examples: installation o...

  • Answered by AI
  • Q2. SITE EXECUTION
  • Q3. PLANNING AND EXECUTION TESTING
  • Q4.  DATE OF COMPLITION
  • Ans. 

    Date of completion refers to the deadline or expected date of finishing a project or task.

    • It is important to set a realistic date of completion to ensure timely delivery of projects.

    • Factors such as available resources, team capacity, and project complexity should be considered when setting the date of completion.

    • Regular monitoring and tracking of progress can help ensure that the project is on track to meet the date of...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - ALL MOST ASK FOR FILD EXECUTION
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Why do you want to change the job?
  • Q2. Where do you want to see yourself in next 5 years?

Flowserve Interview FAQs

How many rounds are there in Flowserve Assistant Engineer interview?
Flowserve interview process usually has 2-3 rounds. The most common rounds in the Flowserve interview process are Technical, Resume Shortlist and HR.
How to prepare for Flowserve Assistant Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Flowserve. The most common topics and skills that interviewers at Flowserve expect are Document Control, Product Design, Solid Works, ANSI and Windows.
What are the top questions asked in Flowserve Assistant Engineer interview?

Some of the top questions asked at the Flowserve Assistant Engineer interview -

  1. What you know by Cv (Co-efficient of fricti...read more
  2. What is unit of flow rat...read more
  3. What is cavitat...read more

Tell us how to improve this page.

Flowserve Assistant Engineer Interview Process

based on 3 interviews

Interview experience

3.3
  
Average
View more

Interview Questions from Similar Companies

ABB Interview Questions
4.1
 • 239 Interviews
John Deere Interview Questions
4.1
 • 233 Interviews
Cummins Interview Questions
4.3
 • 232 Interviews
Caterpillar Inc Interview Questions
4.2
 • 177 Interviews
Atlas Copco Interview Questions
4.2
 • 79 Interviews
TechnipFMC Interview Questions
4.0
 • 72 Interviews
TÜV SÜD Interview Questions
3.9
 • 64 Interviews
Hilti Interview Questions
3.5
 • 60 Interviews
Timken Interview Questions
4.0
 • 47 Interviews
View all
Flowserve Assistant Engineer Salary
based on 85 salaries
₹2.4 L/yr - ₹11 L/yr
56% more than the average Assistant Engineer Salary in India
View more details

Flowserve Assistant Engineer Reviews and Ratings

based on 8 reviews

3.5/5

Rating in categories

3.9

Skill development

3.0

Work-life balance

3.4

Salary

3.6

Job security

3.1

Company culture

2.8

Promotions

3.0

Work satisfaction

Explore 8 Reviews and Ratings
Design Engineer
458 salaries
unlock blur

₹2.6 L/yr - ₹12 L/yr

Associate Engineer
116 salaries
unlock blur

₹4.9 L/yr - ₹11.6 L/yr

Applications Engineer
100 salaries
unlock blur

₹4 L/yr - ₹13 L/yr

Engineer
90 salaries
unlock blur

₹3.1 L/yr - ₹14 L/yr

Junior Engineer
90 salaries
unlock blur

₹2.4 L/yr - ₹6 L/yr

Explore more salaries
Compare Flowserve with

John Deere

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare

Caterpillar Inc

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview