Upload Button Icon Add office photos

Filter interviews by

Fichtner Consulting Engineers Interview Questions, Process, and Tips

Updated 2 Mar 2025

Top Fichtner Consulting Engineers Interview Questions and Answers

View all 16 questions

Fichtner Consulting Engineers Interview Experiences

Popular Designations

16 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(8 Questions)

  • Q1. Will you have similar work experience as required by client.
  • Ans. 

    Yes, I have similar work experience as required by the client.

    • I have worked as a Quality Engineer for the past 5 years.

    • I have experience in conducting quality audits and inspections.

    • I have implemented quality control processes and procedures.

    • I have worked with cross-functional teams to identify and resolve quality issues.

    • I have experience in using quality tools and techniques such as Six Sigma and Lean methodologies.

    • I ...

  • Answered by AI
  • Q2. How will you confirm the proper vertical alingment of Tubewell pipe lowering.
  • Ans. 

    To confirm the proper vertical alignment of Tubewell pipe lowering, measurements and visual inspections can be conducted.

    • Measure the verticality of the pipe using a plumb bob or laser level.

    • Inspect the pipe for any visible signs of misalignment or tilting.

    • Compare the measurements and visual observations with the specified tolerances.

    • Ensure that the pipe is securely anchored to prevent any movement or deviation from the...

  • Answered by AI
  • Q3. What's are the components of a Single village scheme.
  • Ans. 

    A Single village scheme consists of various components aimed at improving the quality of life in a single village.

    • Infrastructure development

    • Access to clean water and sanitation facilities

    • Education and skill development

    • Healthcare facilities

    • Livelihood opportunities

    • Social welfare programs

    • Community empowerment

  • Answered by AI
  • Q4. What are the different types of pipes used in water supply project
  • Ans. 

    There are several types of pipes used in water supply projects, including PVC, HDPE, copper, galvanized steel, and PEX.

    • PVC pipes are commonly used due to their affordability, durability, and resistance to corrosion.

    • HDPE pipes are known for their flexibility, high strength, and resistance to chemicals.

    • Copper pipes are often used for indoor plumbing due to their excellent heat and corrosion resistance.

    • Galvanized steel pi...

  • Answered by AI
  • Q5. What will be your approach on project management staregy.
  • Ans. 

    My approach to project management strategy is to prioritize clear communication, establish realistic goals, and continuously monitor progress.

    • Prioritize clear and effective communication with all stakeholders

    • Establish realistic and achievable goals and milestones

    • Continuously monitor project progress and make necessary adjustments

    • Implement quality control measures to ensure adherence to standards

    • Regularly assess risks a...

  • Answered by AI
  • Q6. Do you work on project monitoring and inspection of water supply project.
  • Ans. 

    Yes, I have experience in project monitoring and inspection of water supply projects.

    • I have worked on multiple water supply projects where I was responsible for monitoring and inspecting the quality of the water supply.

    • I have conducted regular inspections to ensure compliance with quality standards and regulations.

    • I have implemented quality control measures to identify and address any issues or deficiencies in the wate...

  • Answered by AI
  • Q7. Do you know to prepare check list for every components of item to be execute as per RFP.
  • Ans. 

    Yes

    • Yes, I am familiar with preparing checklists for every component of an item to be executed as per the RFP.

    • I understand the importance of having a comprehensive checklist to ensure all requirements are met.

    • I have experience in creating checklists for quality control processes and inspections.

    • I am proficient in identifying critical components and their associated requirements.

    • I can prioritize checklist items based on ...

  • Answered by AI
  • Q8. Do you have any liazoning skills with government Client.
  • Ans. 

    Yes, I have experience with liaising with government clients.

    • I have successfully managed relationships with government clients in my previous role as a Quality Engineer.

    • I am familiar with the protocols and procedures involved in working with government clients.

    • I have effectively communicated and coordinated with government agencies to ensure compliance and quality standards.

    • I have experience in navigating the bureaucra...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Fichtner Consulting Engineers Quality Engineer interview:
  • Quality Assurance
  • Quality Management
  • Monthly Reports
  • Project Coordination
  • MS Project
  • Construction Management
Interview preparation tips for other job seekers - Believes in your self. Be focused on your technical skills. I have basic ruke of doing any work as Involved Intiative and Inform to senior.

Top Fichtner Consulting Engineers Quality Engineer Interview Questions and Answers

Q1. What are the different types of pipes used in water supply project
View answer (3)

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (8)

Interview Questions & Answers

user image Anonymous

posted on 30 Dec 2024

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Approached by Company and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. About my experience with earlier organizationa
  • Q2. About my reasons for quitting last emplyment

Interview Preparation Tips

Interview preparation tips for other job seekers - get clarity from the interviewers on job opportunity and probability of getting the same
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Jul 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the site specifications?
  • Ans. 

    Site specifications refer to the specific requirements and details for a construction site.

    • Site dimensions and boundaries

    • Soil type and bearing capacity

    • Required slope and drainage

    • Permissible noise and dust levels

    • Materials and equipment allowed on site

  • Answered by AI
  • Q2. What are the norms and regulations for construction sites?
  • Ans. 

    Construction sites must adhere to various norms and regulations to ensure safety and compliance.

    • Construction sites must follow local building codes and regulations set by authorities.

    • Safety measures such as proper fencing, signage, and protective gear for workers are mandatory.

    • Environmental regulations must be followed to prevent pollution and protect natural resources.

    • Regular inspections and permits are required to en...

  • Answered by AI

Civil Site Engineer Interview Questions asked at other Companies

Q1. What is the minimum Grade of Concrete used in R.C.C. works?
View answer (65)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What Is mach number
  • Ans. 

    Mach number is a dimensionless quantity representing the ratio of the speed of an object to the speed of sound in the medium through which the object is moving.

    • Mach number is used to determine the speed of an object relative to the speed of sound.

    • It is calculated as the ratio of the speed of the object to the speed of sound in the medium.

    • For example, an aircraft flying at Mach 2 is traveling at twice the speed of sound

  • Answered by AI
  • Q2. What are stresses inside a pipe
  • Ans. 

    Stresses inside a pipe refer to the internal forces acting on the pipe walls due to pressure, temperature changes, and external loads.

    • Stresses can be caused by internal pressure from fluid flow inside the pipe.

    • Temperature changes can lead to thermal stresses as the pipe expands or contracts.

    • External loads such as weight of the pipe itself or additional weight on top can also contribute to stresses.

    • Stresses can lead to ...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. What is the skill of you required in this post
  • Ans. 

    Strong communication, analytical, and problem-solving skills are required for this post.

    • Excellent communication skills to interact with colleagues and clients

    • Analytical skills to analyze data and make informed decisions

    • Problem-solving skills to address challenges and find solutions

    • Ability to work well in a team and independently

    • Time management skills to prioritize tasks effectively

  • Answered by AI
  • Q2. What is your expected salary
  • Ans. 

    My expected salary is based on industry standards, my qualifications, and the responsibilities of the role.

    • Research industry standards for entry-level salaries in the field

    • Consider my qualifications, skills, and experience

    • Factor in the responsibilities and requirements of the Graduate Trainee role

    • Be open to negotiation based on benefits and career growth opportunities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare core mechanical basics for this interview subjects-FLUID MECHANICS, SOLIDS, THERMAL ETC

Graduate Trainee Interview Questions asked at other Companies

Q1. Given an array, how do you get the count of pairs that sum to even
View answer (8)

Fichtner Consulting Engineers interview questions for popular designations

 Design Engineer

 (3)

 Graduate Trainee

 (2)

 Engineer

 (1)

 Deputy Manager HR

 (1)

 Junior Engineer Civil

 (1)

 Project Engineer

 (1)

 Quality Engineer

 (1)

 Civil Site Engineer

 (1)

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Equipment erection procedure and testing procedures
  • Ans. 

    Equipment erection involves following a specific procedure to ensure proper installation and testing procedures are carried out to verify functionality.

    • Equipment erection procedure involves following manufacturer's guidelines and specifications.

    • Testing procedures include conducting insulation resistance tests, continuity tests, and functional tests.

    • Ensure all safety precautions are followed during equipment erection an...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. GIS installation procedure and vaccum procedure dew point analysis etc

Electrical Site Engineer Interview Questions asked at other Companies

Q1. What is the maximum range of voltage rating for belted cables are in used?
View answer (5)

Get interview-ready with Top Fichtner Consulting Engineers Interview Questions

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What's current job duties of current job.
  • Q2. Type test of Transformer
  • Ans. 

    Type test of Transformer involves testing the transformer to ensure it meets specified requirements.

    • Type test includes routine tests like insulation resistance, ratio test, winding resistance, etc.

    • Special tests like temperature rise test, impulse test, and short circuit test are also conducted.

    • Type test ensures the transformer can handle specified loads and environmental conditions.

    • Results of type test determine the qu...

  • Answered by AI
  • Q3. Testing of CT PT
  • Ans. 

    Testing of CT PT involves verifying accuracy, polarity, and insulation resistance.

    • Verify accuracy by comparing readings with known standards.

    • Check polarity to ensure correct connection of leads.

    • Test insulation resistance to prevent short circuits.

    • Perform ratio and burden tests to confirm proper functioning.

    • Calibrate equipment regularly for accurate results.

  • Answered by AI
  • Q4. What is GIS in Substation
  • Ans. 

    GIS in Substation stands for Gas Insulated Switchgear, which is a type of switchgear used in substations for high voltage transmission.

    • GIS is a type of switchgear that uses sulfur hexafluoride gas to insulate and protect electrical equipment.

    • It is compact and requires less space compared to traditional air-insulated switchgear.

    • GIS is commonly used in high voltage substations to improve reliability and reduce maintenanc

  • Answered by AI
  • Q5. Are you do BOQ

Project Engineer Interview Questions asked at other Companies

Q1. Triangle Star Pattern Task Your task is to print a triangle pattern using stars (*) for a given integer N, which represents the number of rows. Input: Integer N (Total number of rows) Output: The triangle pattern printed over N lines Exampl... read more
View answer (11)

Jobs at Fichtner Consulting Engineers

View all

Graduate Trainee Interview Questions & Answers

user image Eldho Skariachen

posted on 4 Jul 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Which of the following materials will have lowest cutting speed? a. Mild steel b. Tool steel c. Brass
  • Ans. 

    Brass will have the lowest cutting speed.

    • Brass is softer and more ductile compared to mild steel and tool steel.

    • Softer materials like brass require lower cutting speeds to prevent excessive tool wear and heat generation.

    • Tool steel is harder than mild steel and brass, so it will have a higher cutting speed compared to the other two materials.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It was all basic mechanical engineering questions along with grammar and lateral thinking questions

Graduate Trainee Interview Questions asked at other Companies

Q1. Given an array, how do you get the count of pairs that sum to even
View answer (8)

Site Supervisor Interview Questions & Answers

user image Nitish Patel

posted on 19 Mar 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Regarding current job.
  • Q2. Future vision and objective.

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience.

Site Supervisor Interview Questions asked at other Companies

Q1. What are handover process to civil or facillities
View answer (4)
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Coding Test 

Water supply projects related with family question paper and send me.

Interview Preparation Tips

Interview preparation tips for other job seekers - Excellent work my scope and decision good quality work on site

Quality Controller Interview Questions asked at other Companies

Q1. What is chemistry? What is difference between organic and inorganic chemistry
View answer (3)

Design Engineer Interview Questions & Answers

user image Mahalaxmi Karaguppi

posted on 2 Mar 2025

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Mar 2024.

Round 1 - Aptitude Test 

The test includes multiple-choice questions on the field you applied for, covering various engineering subjects and amplitude-related questions.

Round 2 - Group Discussion 

After clearing the first round, they provided us with a topic on which we were to discuss the related advantages and disadvantages.

Round 3 - Technical 

(2 Questions)

  • Q1. What technical questions did you encounter related to the position you applied for in code books?
  • Q2. Which software are you currently using in your work?
  • Ans. 

    I am currently using AutoCAD, SolidWorks, and MATLAB in my work.

    • AutoCAD for 2D drafting and detailing

    • SolidWorks for 3D modeling and simulation

    • MATLAB for mathematical analysis and programming

  • Answered by AI
Round 4 - Technical 

(2 Questions)

  • Q1. What details do you include in your CV?
  • Ans. 

    I include relevant work experience, education, skills, certifications, and contact information in my CV.

    • Work experience with job titles, companies, and dates

    • Education with degrees, institutions, and graduation dates

    • Skills related to the job position

    • Certifications or licenses

    • Contact information such as phone number and email address

  • Answered by AI
  • Q2. What projects did you undertake during your Bachelor's in Engineering (BE) and Master's in Technology (M.Tech)?
  • Ans. 

    During my BE and M.Tech, I worked on various projects including designing a solar-powered irrigation system and developing a smart home automation system.

    • Designed a solar-powered irrigation system to optimize water usage and increase crop yield

    • Developed a smart home automation system using IoT technology to control appliances remotely

    • Collaborated with a team to create a prototype for a sustainable energy-efficient buil...

  • Answered by AI
Round 5 - HR 

(1 Question)

  • Q1. Job location and joining date.

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Question Related To Civil and mathematics

Round 3 - Group Discussion 

Discussion About Economy & Environment

Round 4 - One-on-one 

(2 Questions)

  • Q1. Different Field In Civil Engineering
  • Ans. 

    Different fields in civil engineering include structural engineering, transportation engineering, geotechnical engineering, environmental engineering, and construction engineering.

    • Structural engineering focuses on designing and analyzing structures such as buildings, bridges, and dams.

    • Transportation engineering deals with planning, designing, and operating transportation systems like roads, highways, and railways.

    • Geote...

  • Answered by AI
  • Q2. Have To Handle Any projects

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)

Fichtner Consulting Engineers Interview FAQs

How many rounds are there in Fichtner Consulting Engineers interview?
Fichtner Consulting Engineers interview process usually has 2-3 rounds. The most common rounds in the Fichtner Consulting Engineers interview process are Technical, HR and Aptitude Test.
How to prepare for Fichtner Consulting Engineers interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Fichtner Consulting Engineers. The most common topics and skills that interviewers at Fichtner Consulting Engineers expect are Design Engineering, AutoCAD, Power Plant, Renewable Energy and RCC.
What are the top questions asked in Fichtner Consulting Engineers interview?

Some of the top questions asked at the Fichtner Consulting Engineers interview -

  1. What are the different types of pipes used in water supply proj...read more
  2. How will you confirm the proper vertical alingment of Tubewell pipe loweri...read more
  3. Do you work on project monitoring and inspection of water supply proje...read more
How long is the Fichtner Consulting Engineers interview process?

The duration of Fichtner Consulting Engineers interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Fichtner Consulting Engineers Interview Process

based on 23 interviews

Interview experience

4.1
  
Good
View more

Interview Questions from Similar Companies

TCE Interview Questions
3.8
 • 247 Interviews
AECOM Interview Questions
4.2
 • 114 Interviews
Worley Interview Questions
4.1
 • 109 Interviews
Mott MacDonald Interview Questions
4.2
 • 43 Interviews
Tractebel Interview Questions
4.1
 • 42 Interviews
Mecon Interview Questions
3.9
 • 41 Interviews
Ramboll Interview Questions
4.2
 • 37 Interviews
Black & Veatch Interview Questions
4.3
 • 12 Interviews
View all

Fast track your campus placements

View all

Fichtner Consulting Engineers Reviews and Ratings

based on 123 reviews

4.0/5

Rating in categories

3.7

Skill development

3.9

Work-life balance

3.6

Salary

3.6

Job security

3.6

Company culture

3.2

Promotions

3.8

Work satisfaction

Explore 123 Reviews and Ratings
Lead - Mechanical Design Engineer ( Combined Cycle )

Chennai,

Bangalore / Bengaluru

16-25 Yrs

₹ 20-30 LPA

Design Engineer - Control & Instrumentation

Chennai

2-6 Yrs

Not Disclosed

Explore more jobs
Design Engineer
46 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Chief Engineer
27 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

QA QC Engineer
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Chief Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Fichtner Consulting Engineers with

Tractebel

4.1
Compare

Worley

4.1
Compare

TCE

3.8
Compare

Mecon

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview