Upload Button Icon Add office photos

Exide Industries

Compare button icon Compare button icon Compare

Filter interviews by

Exide Industries Process Engineer Interview Questions and Answers

Updated 10 Jan 2025

Exide Industries Process Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the differences between series and parallel circuits?
  • Ans. 

    Series circuits have one path for current flow, while parallel circuits have multiple paths.

    • Series circuits have the same current flowing through all components.

    • Parallel circuits have different currents flowing through each branch.

    • In series circuits, if one component fails, the entire circuit fails.

    • In parallel circuits, if one component fails, the other branches can still function.

    • Examples: Christmas lights are often c...

  • Answered by AI
  • Q2. What is inverter
  • Ans. 

    An inverter is a device that converts direct current (DC) to alternating current (AC) for use in electrical systems.

    • Converts DC to AC power

    • Used in solar power systems to convert DC power from solar panels to AC power for use in homes

    • Commonly used in uninterruptible power supplies (UPS) to provide backup power during outages

  • Answered by AI

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Electronic device Question

I applied via Referral and was interviewed in Sep 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is your company

Interview Preparation Tips

Interview preparation tips for other job seekers - I am process engineer and new product development department working

I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. 1.Tell me something about yourself
  • Q2. Computer shortcut keys
  • Q3. What is unit of current?
  • Ans. 

    The unit of current is Ampere (A).

    • The unit of current is a measure of the flow of electric charge.

    • It represents the rate at which electric charges pass through a given point in a circuit.

    • Current is measured using an ammeter.

    • The SI unit for current is Ampere (A).

  • Answered by AI
  • Q4. How much electricity is available in the house?
  • Ans. 

    The question is not relevant to the job position of Process Engineer.

    • The question is not related to the job responsibilities of a Process Engineer.

    • The amount of electricity available in a house is not relevant to the job.

    • The question may be better suited for an electrician or energy specialist.

  • Answered by AI
  • Q5. What is your acceptance for this company?
  • Q6. He is Allways asked your workability
  • Q7. Some questions are asked your resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Allways think positive and don't fear that moment.
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Assignment 

1 year experience certificate

Round 3 - Technical 

(5 Questions)

  • Q1. 1year experience certificate
  • Q2. Injector nozzle cheking hardness
  • Q3. Modling in injector
  • Ans. 

    Modling in injector is a process used in manufacturing to create complex shapes by injecting molten material into a mold.

    • Modling in injector is commonly used in industries such as automotive, aerospace, and consumer goods.

    • The process involves heating the material until it becomes molten and then injecting it into a mold cavity.

    • The material solidifies inside the mold, taking the shape of the cavity.

    • Examples of materials...

  • Answered by AI
  • Q4. 5S in one week
  • Q5. Machine opration in cutting in nozzle body horizontal and vertical side
  • Ans. 

    Machine operation in cutting in nozzle body horizontal and vertical side.

    • The machine should be set up to cut the nozzle body horizontally and vertically.

    • The cutting process should be precise and accurate to ensure proper functionality of the nozzle.

    • Proper safety measures should be followed during the operation.

    • Regular maintenance and calibration of the machine is necessary to maintain cutting quality.

    • Examples of machin...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - No

I appeared for an interview in Jul 2017.

Interview Preparation Tips

Round: Test
Experience: I was surprised with the written test as i was not aware of written test ...I t
Taught that interview will be on the experience based and face to face.
Tips: I was failed in the first round.
Duration: 40 minutes
Total Questions: 20

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Jan 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction its very important
  • Q2. Subject Questions Technical Questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your self confidence
research about company, speak clearly

I applied via Recruitment Consultant and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is productivity in business
  • Ans. 

    Productivity in business refers to the efficiency and effectiveness of the production process.

    • Productivity is the measure of output per unit of input.

    • It is important for businesses to maximize productivity to increase profits and remain competitive.

    • Factors that can affect productivity include technology, employee training, and management practices.

    • Examples of productivity measures include units produced per hour, reven...

  • Answered by AI
  • Q2. How you handling manpower

Interview Preparation Tips

Interview preparation tips for other job seekers - Ex
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(4 Questions)

  • Q1. Dear sir production department operator
  • Q2. Diploma mechanical engineering production
  • Q3. Make a Tread and sidewall
  • Ans. 

    A tread and sidewall are key components of a tire, providing traction and protection.

    • The tread is the part of the tire that makes contact with the road surface, designed to provide grip and traction.

    • The sidewall is the vertical section of the tire that connects the tread to the bead of the tire, providing structural support and protection.

    • Tread patterns can vary based on the intended use of the tire, such as all-season...

  • Answered by AI
  • Q4. Tread jde++ Juh5 (bho) Jdexf Jdcxd 295 jdcxd Sidewall - 344 Sidewall -535

I applied via Campus Placement and was interviewed before Nov 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Assignment 

Technical engineer in plastic line in cipet Karnataka Mysore

Round 3 - Case Study 

BSc after cipet in Karnataka plastic processing technique

Round 4 - One-on-one 

(5 Questions)

  • Q1. Quality and production daily working in study my college hard work
  • Q2. Tyre using three type materials natural lover
  • Ans. 

    Tyres are made using three types of materials: natural rubber, synthetic rubber, and carbon black.

    • Natural rubber is derived from rubber trees and provides elasticity and flexibility to the tyre.

    • Synthetic rubber is made from petroleum and provides durability and resistance to wear and tear.

    • Carbon black is added to the rubber to improve its strength and durability.

    • The combination of these three materials results in a tyr...

  • Answered by AI
  • Q3. All plastic line all materials
  • Q4. Plastic property and production and quality
  • Q5. Production manager interview

Interview Preparation Tips

Topics to prepare for JK Tyres Production Engineer interview:
  • Packaging
Interview preparation tips for other job seekers - First time tires company Mysore and all plastic material knowledge plastic degree

Exide Industries Interview FAQs

How many rounds are there in Exide Industries Process Engineer interview?
Exide Industries interview process usually has 1 rounds. The most common rounds in the Exide Industries interview process are Technical.
How to prepare for Exide Industries Process Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Exide Industries. The most common topics and skills that interviewers at Exide Industries expect are Apqp, Assembly Line, Bom, Control Plan and New Product Development.
What are the top questions asked in Exide Industries Process Engineer interview?

Some of the top questions asked at the Exide Industries Process Engineer interview -

  1. What are the differences between series and parallel circui...read more
  2. What is inver...read more

Tell us how to improve this page.

Exide Industries Process Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Exide Industries Process Engineer Salary
based on 4 salaries
₹2.1 L/yr - ₹9 L/yr
At par with the average Process Engineer Salary in India
View more details
Area Sales Executive
395 salaries
unlock blur

₹2.6 L/yr - ₹10.2 L/yr

Service Engineer
260 salaries
unlock blur

₹1.8 L/yr - ₹9.5 L/yr

Senior Area Sales Executive
251 salaries
unlock blur

₹4.2 L/yr - ₹11.6 L/yr

Assistant Manager
249 salaries
unlock blur

₹5.5 L/yr - ₹13.5 L/yr

Deputy Manager
148 salaries
unlock blur

₹9 L/yr - ₹18 L/yr

Explore more salaries
Compare Exide Industries with

Bosch

4.2
Compare

Samvardhana Motherson Group

3.7
Compare

MRF Tyres

3.7
Compare

Ceat Tyres

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview