Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Dr. Reddy's Team. If you also belong to the team, you can get access from here

Dr. Reddy's Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Dr. Reddy's Production Specialist Interview Questions, Process, and Tips

Updated 14 Mar 2024

Top Dr. Reddy's Production Specialist Interview Questions and Answers

Dr. Reddy's Production Specialist Interview Experiences

6 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is moc and can you elaborate different moc for filters
  • Ans. 

    MOC stands for Material of Construction. Different MOCs for filters include stainless steel, polypropylene, and ceramic.

    • MOC stands for Material of Construction

    • Different MOCs for filters include stainless steel, polypropylene, and ceramic

  • Answered by AI

Skills evaluated in this interview

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Optical Density, Cell culture, Batch process facts and troubleshooting
Round 2 - HR 

(1 Question)

  • Q1. Didn't ask any question He was cleared about the best that he could offer and so on, the HR was too rude and very unprofessional.

Interview Preparation Tips

Interview preparation tips for other job seekers - Stick to the shared resume
Be specific with answers
and say freely when you don't know or not sure with answers

Production Specialist Interview Questions Asked at Other Companies

asked in Dr. Reddy's
Q1. Principles of the involved instruments/Equipment.
asked in Dr. Reddy's
Q2. MOC of filters, vessels, diaphragm valves.
asked in Dr. Reddy's
Q3. what is moc and can you elaborate different moc for filters
asked in Dr. Reddy's
Q4. Technically in-depth of downstream processing
asked in Atotech
Q5. Explain What is electeoplating
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. About your previous work and position
  • Q2. About the work flow chart and instruments you operated.
  • Q3. About the chromatography columns and tff centrifuge working .
  • Q4. About resin and packing unpacking calculations
  • Q5. Remaining all are basic questions regarding proteins and purification techniques.
Round 3 - HR 

(2 Questions)

  • Q1. Alcoa principal
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Design resume according to job description and answer straight to interviewer be frank ...

I applied via LinkedIn and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Define yourself
  • Q2. Why u want to join
  • Q3. Will stay here more than a year
  • Q4. Why u want to switch your current organisation
  • Q5. And all about your technical experience and basic things.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just don't be panic and speak sincerely whatever in your mind don't hesitate to speak your inner voice.
Present your self in the way you want to be there.
Don't lie they will definitely catch you.
And study conceptually, and thats it.

Wish you very All the best 😊

Dr. Reddy's interview questions for designations

 Production

 (3)

 Senior Specialist

 (1)

 Customer Service Specialist

 (1)

 Analytical Specialist

 (1)

 Production Supervisor

 (2)

 Production Operator

 (2)

 Production Manager

 (2)

 Production Officer

 (1)

Interview Questionnaire 

5 Questions

  • Q1. Principles of the involved instruments/Equipment.
  • Ans. 

    The principles of the involved instruments/equipment refer to the fundamental concepts and theories behind their operation.

    • Understanding the principles helps in troubleshooting and maintenance.

    • Examples include the principles of electrical circuits for production equipment.

    • Knowledge of the principles aids in optimizing production processes.

    • Understanding the principles allows for effective utilization of the instruments/...

  • Answered by AI
  • Q2. MOC of filters, vessels, diaphragm valves.
  • Ans. 

    MOC stands for Material of Construction. Filters, vessels, and diaphragm valves can be made from various materials.

    • MOC refers to the material used to construct filters, vessels, and diaphragm valves.

    • Different materials have different properties and are suitable for different applications.

    • Common materials used for filters include stainless steel, polypropylene, and ceramic.

    • Vessels can be made from materials like carbon ...

  • Answered by AI
  • Q3. QMS elements
  • Q4. Temperature control system
  • Q5. About Used sensors.

I applied via Naukri.com and was interviewed before Dec 2019. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What is your job role ?
  • Q2. What you learned in your carrer ?
  • Q3. Technically in-depth of downstream processing
  • Ans. 

    Downstream processing involves the purification and separation of products in biotechnology and pharmaceutical industries.

    • Downstream processing is a crucial step in the production of biopharmaceuticals.

    • It involves the purification and separation of the desired product from the fermentation broth or cell culture.

    • Techniques used in downstream processing include filtration, chromatography, centrifugation, and precipitatio...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong technically

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(6 Questions)

  • Q1. Handling of Validation
  • Ans. 

    Validation in production involves ensuring that processes and products meet quality standards.

    • Validation involves verifying that equipment, processes, and systems are operating correctly and consistently.

    • Validation also includes confirming that products meet specifications and quality standards.

    • Documentation of validation activities is essential for regulatory compliance and continuous improvement.

    • Examples of validatio...

  • Answered by AI
  • Q2. Operations of reactors, centrifuge, sparker filters, anfds, ejectors.
  • Q3. Handling of Qualifications
  • Q4. Handling of Safety permits
  • Ans. 

    Safety permits are essential for ensuring compliance with regulations and maintaining a safe work environment.

    • Safety permits are required for certain activities or equipment to ensure they meet safety standards.

    • Production officers must be familiar with the types of safety permits needed in their industry.

    • They are responsible for obtaining and renewing safety permits as needed.

    • Failure to comply with safety permit requir...

  • Answered by AI
  • Q5. Operation of Distillation
  • Ans. 

    Distillation is a process used to separate components of a liquid mixture based on differences in boiling points.

    • Distillation involves heating the liquid mixture to create vapor, then cooling the vapor to condense it back into liquid form.

    • The components with lower boiling points will vaporize first and be collected as the distillate, while the components with higher boiling points remain in the original container.

    • Commo...

  • Answered by AI
  • Q6. Handling of Deviations
  • Ans. 

    Deviations in production processes must be promptly identified, investigated, and documented to ensure product quality and compliance.

    • Deviation should be reported immediately to the appropriate personnel

    • Investigate the root cause of the deviation

    • Document all findings and actions taken

    • Implement corrective and preventive actions to prevent recurrence

    • Review and approve deviation reports before closure

  • Answered by AI
Round 2 - One-on-one 

(5 Questions)

  • Q1. Handling of CAPA
  • Ans. 

    CAPA refers to Corrective and Preventive Actions taken to address non-conformities and prevent recurrence.

    • Identify the root cause of the issue

    • Develop a corrective action plan to address the issue

    • Implement the corrective action plan

    • Monitor the effectiveness of the corrective action

    • Implement preventive actions to prevent recurrence

  • Answered by AI
  • Q2. What is DATA INTIGRIY
  • Ans. 

    Data integrity refers to the accuracy, consistency, and reliability of data throughout its lifecycle.

    • Ensuring data is accurate and reliable

    • Maintaining consistency of data

    • Preventing unauthorized access or modifications

    • Implementing data validation processes

    • Regularly backing up data to prevent loss

  • Answered by AI
  • Q3. Handling Solvents
  • Q4. Handling of Batch failures
  • Ans. 

    Batch failures should be analyzed to identify root causes and prevent future occurrences.

    • Investigate the root cause of the batch failure

    • Implement corrective actions to prevent future failures

    • Document the findings and actions taken for future reference

    • Communicate with relevant stakeholders about the batch failure and resolution

    • Conduct a review of the production process to identify potential areas for improvement

  • Answered by AI
  • Q5. Handling of Deviations
  • Ans. 

    Handling of deviations involves identifying, investigating, and resolving any deviations from standard procedures or specifications.

    • Deviation should be documented and reported immediately

    • Investigate root cause of deviation

    • Implement corrective and preventive actions

    • Review and update procedures to prevent future deviations

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Current Role and responsibilities
  • Q2. Personal information
  • Q3. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - : 1. Daily activity you are handling on daily basis.
2. Safety and MSD
3.why shifting is required
4.What is the importance of blending
5 type of GMP practices you are following
6. Information from BMR
How dis lation happen
7. About MSDS
8. Why work permit system is required
9. Difference between incident and accident:
10.Work permits

*1)* What is GMP/cGMP as per your understanding? OR What do you know about GMP/cGMP?
*2)* What is Data Integrity?
Explain it with Examples.
*3)* What is Data Manipulation?
Explain with Examples.
*4)* What is meaning of Plant Capacity / Bottleneck / Equipment / Stage..?
*5)* Safety or Process Safety related to your Products.
What/Which kind of Safety Policy do you have in your current company?
*6)* ALCOA
PPE
PH
Chilled water temp
Deviation
GMP
EHS
Process
Operations
Current role and responsibilities
Solvent
Batch fail
CAPA
Validation, qualifications

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - HR 

(5 Questions)

  • Q1. Akums drugs and pharmaceuticals
  • Q2. What are the key processes involved in pharmaceutical production?
  • Q3. Akums industry growth opportunities and positive environment
  • Q4. Akums manufacturing by cosmetic products or neutraceutical products, allopathic products, ayurvedic products
  • Q5. Growth opportunities.

Interview Preparation Tips

Interview preparation tips for other job seekers - Akums drugs and pharmaceuticals has a strong industry for its high quality products..
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Tell me about DCS HMI
  • Q2. How to manage manpower &cost reduction
  • Ans. 

    Manpower can be managed by proper planning, training, and delegation. Cost reduction can be achieved through efficiency improvements, waste reduction, and negotiation with suppliers.

    • Develop a detailed manpower plan based on workload and skill requirements

    • Invest in training and development programs to upskill existing employees

    • Delegate tasks effectively to ensure optimal use of manpower

    • Implement efficiency improvements ...

  • Answered by AI
  • Q3. About documentation
  • Q4. Production planning
  • Q5. Batchprocess with safety
  • Ans. 

    Batch process with safety involves ensuring that production processes are carried out in a safe and controlled manner.

    • Implementing safety protocols and procedures for each step of the batch process

    • Regularly conducting safety audits and inspections to identify potential hazards

    • Providing proper training to employees on safety measures and emergency procedures

    • Using appropriate personal protective equipment (PPE) when hand...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Area qualifications
  • Q2. Equipment validation
Round 2 - Technical 

(2 Questions)

  • Q1. Manufacturing process
  • Q2. Trouble shooting

Dr. Reddy's Interview FAQs

How many rounds are there in Dr. Reddy's Production Specialist interview?
Dr. Reddy's interview process usually has 2 rounds. The most common rounds in the Dr. Reddy's interview process are Technical, HR and Resume Shortlist.
How to prepare for Dr. Reddy's Production Specialist interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Dr. Reddy's. The most common topics and skills that interviewers at Dr. Reddy's expect are GMP, Production Operations, Compliance, Mammalian Cell Culture and Continuous Improvement.
What are the top questions asked in Dr. Reddy's Production Specialist interview?

Some of the top questions asked at the Dr. Reddy's Production Specialist interview -

  1. Principles of the involved instruments/Equipme...read more
  2. MOC of filters, vessels, diaphragm valv...read more
  3. what is moc and can you elaborate different moc for filt...read more

Tell us how to improve this page.

Dr. Reddy's Production Specialist Interview Process

based on 4 interviews

2 Interview rounds

  • Technical Round
  • HR Round
View more

Interview Questions from Similar Companies

Cipla Interview Questions
4.1
 • 483 Interviews
Lupin Interview Questions
4.2
 • 335 Interviews
Aurobindo Pharma Interview Questions
4.0
 • 238 Interviews
Hetero Interview Questions
3.9
 • 201 Interviews
Ipca Laboratories Interview Questions
3.9
 • 156 Interviews
View all
Dr. Reddy's Production Specialist Salary
based on 275 salaries
₹3.2 L/yr - ₹7.8 L/yr
22% more than the average Production Specialist Salary in India
View more details

Dr. Reddy's Production Specialist Reviews and Ratings

based on 50 reviews

3.9/5

Rating in categories

3.6

Skill development

3.8

Work-life balance

3.6

Salary

3.9

Job security

3.9

Company culture

3.0

Promotions

3.5

Work satisfaction

Explore 50 Reviews and Ratings
Team Member
3.9k salaries
unlock blur

₹1.8 L/yr - ₹9.7 L/yr

Analytical Scientist
851 salaries
unlock blur

₹3.5 L/yr - ₹13.5 L/yr

Assistant Manager
772 salaries
unlock blur

₹4.4 L/yr - ₹14.5 L/yr

Senior Team Member
541 salaries
unlock blur

₹3.8 L/yr - ₹13 L/yr

Team Lead
468 salaries
unlock blur

₹7 L/yr - ₹24 L/yr

Explore more salaries
Compare Dr. Reddy's with

Sun Pharmaceutical Industries

4.0
Compare

Cipla

4.1
Compare

Biocon Limited

3.9
Compare

Lupin

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview