Upload Button Icon Add office photos

Pfizer

Compare button icon Compare button icon Compare

Filter interviews by

Pfizer Production Officer Interview Questions and Answers

Updated 30 Aug 2024

Pfizer Production Officer Interview Experiences

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(6 Questions)

  • Q1. Handling of Validation
  • Ans. 

    Validation in production involves ensuring that processes and products meet quality standards.

    • Validation involves verifying that equipment, processes, and systems are operating correctly and consistently.

    • Validation also includes confirming that products meet specifications and quality standards.

    • Documentation of validation activities is essential for regulatory compliance and continuous improvement.

    • Examples of validatio...

  • Answered by AI
  • Q2. Operations of reactors, centrifuge, sparker filters, anfds, ejectors.
  • Q3. Handling of Qualifications
  • Q4. Handling of Safety permits
  • Ans. 

    Safety permits are essential for ensuring compliance with regulations and maintaining a safe work environment.

    • Safety permits are required for certain activities or equipment to ensure they meet safety standards.

    • Production officers must be familiar with the types of safety permits needed in their industry.

    • They are responsible for obtaining and renewing safety permits as needed.

    • Failure to comply with safety permit requir...

  • Answered by AI
  • Q5. Operation of Distillation
  • Ans. 

    Distillation is a process used to separate components of a liquid mixture based on differences in boiling points.

    • Distillation involves heating the liquid mixture to create vapor, then cooling the vapor to condense it back into liquid form.

    • The components with lower boiling points will vaporize first and be collected as the distillate, while the components with higher boiling points remain in the original container.

    • Commo...

  • Answered by AI
  • Q6. Handling of Deviations
  • Ans. 

    Deviations in production processes must be promptly identified, investigated, and documented to ensure product quality and compliance.

    • Deviation should be reported immediately to the appropriate personnel

    • Investigate the root cause of the deviation

    • Document all findings and actions taken

    • Implement corrective and preventive actions to prevent recurrence

    • Review and approve deviation reports before closure

  • Answered by AI
Round 2 - One-on-one 

(5 Questions)

  • Q1. Handling of CAPA
  • Ans. 

    CAPA refers to Corrective and Preventive Actions taken to address non-conformities and prevent recurrence.

    • Identify the root cause of the issue

    • Develop a corrective action plan to address the issue

    • Implement the corrective action plan

    • Monitor the effectiveness of the corrective action

    • Implement preventive actions to prevent recurrence

  • Answered by AI
  • Q2. What is DATA INTIGRIY
  • Ans. 

    Data integrity refers to the accuracy, consistency, and reliability of data throughout its lifecycle.

    • Ensuring data is accurate and reliable

    • Maintaining consistency of data

    • Preventing unauthorized access or modifications

    • Implementing data validation processes

    • Regularly backing up data to prevent loss

  • Answered by AI
  • Q3. Handling Solvents
  • Q4. Handling of Batch failures
  • Ans. 

    Batch failures should be analyzed to identify root causes and prevent future occurrences.

    • Investigate the root cause of the batch failure

    • Implement corrective actions to prevent future failures

    • Document the findings and actions taken for future reference

    • Communicate with relevant stakeholders about the batch failure and resolution

    • Conduct a review of the production process to identify potential areas for improvement

  • Answered by AI
  • Q5. Handling of Deviations
  • Ans. 

    Handling of deviations involves identifying, investigating, and resolving any deviations from standard procedures or specifications.

    • Deviation should be documented and reported immediately

    • Investigate root cause of deviation

    • Implement corrective and preventive actions

    • Review and update procedures to prevent future deviations

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Current Role and responsibilities
  • Q2. Personal information
  • Q3. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - : 1. Daily activity you are handling on daily basis.
2. Safety and MSD
3.why shifting is required
4.What is the importance of blending
5 type of GMP practices you are following
6. Information from BMR
How dis lation happen
7. About MSDS
8. Why work permit system is required
9. Difference between incident and accident:
10.Work permits

*1)* What is GMP/cGMP as per your understanding? OR What do you know about GMP/cGMP?
*2)* What is Data Integrity?
Explain it with Examples.
*3)* What is Data Manipulation?
Explain with Examples.
*4)* What is meaning of Plant Capacity / Bottleneck / Equipment / Stage..?
*5)* Safety or Process Safety related to your Products.
What/Which kind of Safety Policy do you have in your current company?
*6)* ALCOA
PPE
PH
Chilled water temp
Deviation
GMP
EHS
Process
Operations
Current role and responsibilities
Solvent
Batch fail
CAPA
Validation, qualifications

Skills evaluated in this interview

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What is your project
  • Q2. What is molarity

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview process was so simple
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
No response

I applied via Walk-in and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(8 Questions)

  • Q1. Tell me about your self
  • Ans. My name is Bhosale Dhiraj Pradip .I am 22 years old and. I complete my diploma in venutai Chavan pharmacy college phaltan. I am currently working in imaec medntek ltd in Rm,Pm stores Chinchwad pune and 14 months experience
  • Answered Anonymously
  • Q2. What are your strengths
  • Q3. What are your salary expectation
  • Q4. Explain granulation process
  • Ans. 

    Granulation process involves the formation of granules from powder particles.

    • Powder particles are agglomerated to form granules.

    • Granulation can be achieved through wet or dry methods.

    • Wet granulation involves adding a liquid binder to the powder mixture.

    • Dry granulation involves compacting the powder mixture without the use of liquids.

    • Examples of granulation equipment include fluid bed granulators and roller compactors.

  • Answered by AI
  • Q5. Explain type of capsule
  • Ans. 

    Capsules are solid dosage forms in which the drug is enclosed in a hard or soft soluble container.

    • Capsules can be classified as hard gelatin capsules or soft gelatin capsules.

    • Hard gelatin capsules are made of two pieces that fit together, while soft gelatin capsules are made of a single piece.

    • Capsules can be filled with powder, granules, pellets, or liquids.

    • Examples of capsules include Tylenol capsules and Vitamin E ca

  • Answered by AI
  • Q6. Two types of row material
  • Ans. 

    Two types of row material are natural materials and synthetic materials.

    • Natural materials come from plants, animals, or minerals (e.g. cotton, wool, wood)

    • Synthetic materials are man-made through chemical processes (e.g. plastic, nylon, polyester)

  • Answered by AI
  • Q7. What Is your hobby
  • Q8. Explain row material dispensing sicvence
  • Ans. 

    Raw material dispensing science involves the accurate measurement and distribution of materials for production.

    • Raw material dispensing involves measuring and distributing materials needed for production processes.

    • Accurate measurements are crucial to ensure the quality and consistency of the final product.

    • Proper labeling and storage of raw materials is essential to prevent mix-ups and contamination.

    • Automated dispensing ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Cipla is the best company in india
Interview experience
3
Average
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
No response

I applied via Walk-in and was interviewed in Nov 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Ok ok ok ok aptitude test

Round 3 - Technical 

(2 Questions)

  • Q1. About daily Process work
  • Q2. Process handlled,
Round 4 - One-on-one 

(2 Questions)

  • Q1. Daily process ok
  • Q2. Daily process ok ok

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls do not put Resign even they say yes for joining before Handed over you Offer letter... In my case they offer me job so i put Resign in my present job even i not have offer letter of cadilla... But worst thing is they not give me offer letter... So pls do not trust cadilla Pharmaceuticals... They not give offer letter... They only take your intervieve...
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What is tablet ,types of tablet ,defects of tablet,what is coating,types of coating
  • Q2. Percentage solved question, me and family introduction

Interview Preparation Tips

Topics to prepare for Akums Drugs & Pharmaceuticals Limited Production Officer interview:
  • Compressin
  • Tablets
  • Bmr
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Very easy because they don't have manpower

Round 2 - Technical 

(1 Question)

  • Q1. Tell me about yourself
  • Ans. 

    I am a dedicated and experienced Production Officer with a strong background in managing production processes and ensuring efficiency.

    • I have a Bachelor's degree in Industrial Engineering

    • I have 5 years of experience in overseeing production operations

    • I am skilled in implementing lean manufacturing principles

    • I have a proven track record of improving production efficiency by 20% in my previous role

  • Answered by AI

Production Officer Interview Questions & Answers

Laurus Labs user image Chinagudaba Uday kiran

posted on 16 May 2024

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is the IR value of functional groups
  • Ans. 

    IR values of functional groups indicate the presence of specific bonds in a molecule.

    • IR values are unique for different functional groups, allowing for identification in a molecule

    • Common IR values include 3300-3500 cm^-1 for O-H stretch in alcohols, and 1700-1750 cm^-1 for C=O stretch in carbonyl compounds

    • IR spectroscopy is a valuable tool in organic chemistry for structural determination

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - study full organic chemistry basics
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Depending on the peptide synthesis & oncology

Interview Preparation Tips

Interview preparation tips for other job seekers - I want reserch development
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. MOC OF different things used in shop floor.
  • Ans. 

    MOC (Material of Construction) refers to the materials used to build different items on the shop floor.

    • MOC varies depending on the item being produced

    • Common MOCs include stainless steel, aluminum, plastic, and carbon steel

    • Selection of MOC is based on factors like durability, cost, and compatibility with the product being manufactured

  • Answered by AI
  • Q2. Steps including in pH meter calibration
  • Ans. 

    pH meter calibration involves several steps to ensure accurate readings.

    • Rinse the electrode with deionized water

    • Immerse the electrode in pH 7 buffer solution and adjust the meter accordingly

    • Repeat the process with pH 4 or 10 buffer solutions for calibration

    • Check the slope and offset values to ensure accuracy

    • Perform a final check with a known pH solution

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Experience and expected salary

Pfizer Interview FAQs

How many rounds are there in Pfizer Production Officer interview?
Pfizer interview process usually has 2 rounds. The most common rounds in the Pfizer interview process are Technical.
How to prepare for Pfizer Production Officer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Pfizer. The most common topics and skills that interviewers at Pfizer expect are Agile, Monitoring, Pharma, Pharmacy and Supervision.
What are the top questions asked in Pfizer Production Officer interview?

Some of the top questions asked at the Pfizer Production Officer interview -

  1. Area qualificati...read more
  2. Manufacturing proc...read more
  3. Equipment validat...read more

Tell us how to improve this page.

Pfizer Production Officer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Pfizer Production Officer Salary
based on 17 salaries
₹1.7 L/yr - ₹4.8 L/yr
24% less than the average Production Officer Salary in India
View more details

Pfizer Production Officer Reviews and Ratings

based on 26 reviews

4.8/5

Rating in categories

4.4

Skill development

4.6

Work-life balance

4.4

Salary

4.2

Job security

4.5

Company culture

4.0

Promotions

4.4

Work satisfaction

Explore 26 Reviews and Ratings
Junior Officer
260 salaries
unlock blur

₹1.8 L/yr - ₹3.6 L/yr

Territory Executive
219 salaries
unlock blur

₹3.2 L/yr - ₹8.5 L/yr

Executive
169 salaries
unlock blur

₹2.9 L/yr - ₹9 L/yr

Junior Associate
148 salaries
unlock blur

₹2 L/yr - ₹3.6 L/yr

Health Care Executive
133 salaries
unlock blur

₹3.6 L/yr - ₹8.5 L/yr

Explore more salaries
Compare Pfizer with

GlaxoSmithKline Pharmaceuticals

4.1
Compare

Sun Pharmaceutical Industries

4.0
Compare

Cipla

4.1
Compare

Dr. Reddy's

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview