AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Consort Builders Senior Billing Engineer Interview Questions and Answers
Consort Builders Senior Billing Engineer Interview Experiences
1 interview found
Selected
I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.
(8 Questions)
- Q1. What is your work in previous company ?
- Q2. Tell me about rolling margin of steel?
- Ans.
Rolling margin of steel refers to the difference between the theoretical weight of steel and the actual weight after rolling.
Rolling margin is calculated by subtracting the actual weight of rolled steel from the theoretical weight.
It accounts for factors like material loss during the rolling process and variations in density.
Understanding rolling margin is important for accurate billing and cost estimation in steel pro
- Q3. Steel and cement Reconciliation?
- Q4. Good knowledge in foot and inche measurment for Punjab Site.
- Q5. What is diffence between OHC and Wege Excalation?
- Ans.
OHC stands for Over Head Charges while Wege Escalation is a term used in construction projects.
OHC refers to additional charges incurred during a project that are not directly related to labor or materials
Wege Escalation refers to the increase in costs due to delays or changes in the project timeline
OHC can include expenses like equipment rental, permits, or insurance
Wege Escalation can occur when there are unexpected ...
- Q6. Good knowlege of DAR and there veriables.
- Q7. Mode of measurment of brick work, shuttering, Scaffolding, plaster, and painting.
- Ans.
Measurement of brick work, shuttering, scaffolding, plaster, and painting is typically done in square meters or cubic meters depending on the item.
Brick work is measured in square meters (m²)
Shuttering is measured in square meters (m²)
Scaffolding is measured in cubic meters (m³)
Plaster is measured in square meters (m²)
Painting is measured in square meters (m²)
- Q8. Good knowledge of IS 1200 for billing and Quantity Surveyor.
Top trending discussions
Interview questions from similar companies
Selected
I appeared for an interview before Mar 2024, where I was asked the following questions.
- Q1. About experience
- Q2. How to handle your project
- Ans.
Effective project handling involves planning, communication, and adaptability to ensure successful outcomes.
Define clear project goals and objectives to align the team.
Utilize project management tools like Jira or Trello for tracking progress.
Conduct regular team meetings to discuss updates and challenges.
Implement Agile methodologies to adapt to changes quickly.
Document all processes and decisions for future reference
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Technical Civil Execution engineering with finishing RCC experience
Selected
I applied via Approached by Company and was interviewed before Aug 2022. There were 4 interview rounds.
(1 Question)
- Q1. Technical questions
(1 Question)
- Q1. Technical questions
(1 Question)
- Q1. Salary discussion
Senior Engineer Interview Questions & Answers
Signature Global
Sandip kumar mishra
posted on 6 Feb 2024
Selected
I applied via Naukri.com and was interviewed in Jan 2024. There were 3 interview rounds.
Written paper as per site and codes
It’s about Quality and execution with VP and audit team
(2 Questions)
- Q1. Salary discussion
- Q2. Joining procedures and company policy
I applied via Walk-in and was interviewed in Mar 2023. There were 2 interview rounds.
(4 Questions)
- Q1. Qty of cement in M25 grade concrete
- Ans.
The quantity of cement in M25 grade concrete is 350 kg/m³.
M25 grade concrete has a mix proportion of 1:1:2 (cement:sand:aggregate).
The total volume of concrete is taken as 1 m³.
Therefore, the quantity of cement required for 1 m³ of M25 grade concrete is 350 kg.
This is calculated by multiplying the volume of concrete by the proportion of cement in the mix.
- Q2. Exact weight of different dia of steel
- Ans.
The weight of steel varies with its diameter.
The weight of steel can be calculated using the formula: weight = volume x density
The density of steel is approximately 7850 kg/m³
The volume of steel can be calculated using the formula: volume = pi x (diameter/2)² x length
For example, a 10mm diameter steel rod with a length of 1 meter would weigh approximately 0.393 kg
- Q3. Process of waterproofing
- Ans.
Waterproofing is the process of making a structure or object resistant to water penetration.
Identify the areas that need waterproofing such as roofs, walls, and foundations.
Clean and prepare the surface to be waterproofed.
Apply a waterproofing membrane or coating such as bituminous, acrylic, or polyurethane.
Ensure proper drainage and slope to prevent water accumulation.
Test the waterproofing system for leaks and make n...
- Q4. Conversion of brass to Cum
- Ans.
Conversion of brass to Cum
Brass is an alloy of copper and zinc, while Cum is not a known substance
It is not possible to convert brass to Cum
Perhaps the question is referring to a different substance or material
Interview Preparation Tips
I applied via Company Website and was interviewed in Jan 2023. There were 2 interview rounds.
(6 Questions)
- Q1. Mivan setting and drawing
- Q2. Slab checking slab cycle
- Q3. Interior change in drawing
- Ans.
Interior change in drawing refers to modifying the internal elements of a design or blueprint.
Identify the specific elements that need to be changed
Consider the impact of the changes on the overall design
Update the drawing with the new interior layout
Ensure that the changes align with the project requirements
- Q4. Bathroom waterproofing and plumbing
- Q5. Estimation and costing
- Q6. Bar bending schedule
Interview Preparation Tips
Prepare basics information
I applied via Walk-in and was interviewed in Jun 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. About your self
- Q2. My experience as an engineer
- Q3. How to execute work on site
- Ans.
Execution of work on site involves planning, coordination, and management of resources to ensure timely completion of the project.
Develop a detailed project plan and schedule
Allocate resources effectively and efficiently
Ensure safety measures are in place
Regularly monitor and report progress
Address any issues or challenges that arise
Maintain good communication with stakeholders
Ensure quality control and adherence to sp...
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Mar 2022. There was 1 interview round.
(3 Questions)
- Q1. About civil engineering for site and billing Quantity surveying and rate analysis .actual site quantity measurements and check contractor bill and certification
- Q2. Concrete quantity calculations
- Q3. As per site and as per drawing calculated
Interview Preparation Tips
I applied via Naukri.com and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Deduction in shuttering criteria
- Ans.
Deduction in shuttering criteria refers to the reduction in the amount of shuttering material used in construction.
Deduction in shuttering criteria is done to reduce the cost of construction.
It is also done to reduce the time taken for construction.
The deduction is usually done based on the strength of the concrete being used.
For example, if the concrete strength is high, less shuttering material is required.
The deduct...
Interview Preparation Tips
Consort Builders Interview FAQs
Tell us how to improve this page.
Consort Builders Interviews By Designations
- Consort Builders Quality Engineer Interview Questions
- Consort Builders Senior Billing Engineer Interview Questions
- Consort Builders Senior Site Engineer Interview Questions
- Consort Builders Executive/ Sr Executive - Administration Interview Questions
- Consort Builders Graduate Engineer Trainee (Get) Interview Questions
- Consort Builders Project Planning Manager Interview Questions
- Consort Builders Trainee Interview Questions
Interview Questions for Popular Designations
- Billing Engineer Interview Questions
- Planning & Billing Engineer Interview Questions
- Billing Executive Interview Questions
- Site & Billing Engineer Interview Questions
- Estimation & Billing Engineer Interview Questions
- Medical Billing Executive Interview Questions
- Civil Billing Engineer Interview Questions
- Billing Manager Interview Questions
- Show more
Consort Builders Senior Billing Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Safety Officer
21
salaries
|  ₹3 L/yr - ₹4.3 L/yr |
|
Civil Site Engineer
11
salaries
| ₹2.5 L/yr - ₹4.5 L/yr |
|
Civil Engineer
9
salaries
| ₹2.4 L/yr - ₹6 L/yr |
|
Billing Engineer
8
salaries
| ₹3.6 L/yr - ₹8.4 L/yr |
|
Assistant Manager
7
salaries
| ₹5.1 L/yr - ₹10 L/yr |
Signature Global
Pittie Group
Maxinfra
Vensa Infrastructure
- Home >
- Interviews >
- Consort Builders Interview Questions >
- Consort Builders Senior Billing Engineer Interview Questions
