Filter interviews by
Clear (1)
I was interviewed in Jun 2022.
Top trending discussions
posted on 13 Sep 2016
There are several types of concrete, including plain, reinforced, pre-stressed, and lightweight.
Plain concrete is the most basic type and is used for general construction purposes.
Reinforced concrete has steel bars or mesh embedded in it to increase its strength.
Pre-stressed concrete is compressed before use to increase its strength and durability.
Lightweight concrete is made with lightweight aggregates, such as expand...
My minor project was an Android application for tracking daily expenses.
Developed using Java and Android Studio
Used SQLite database to store data
Implemented features like adding expenses, categorizing them, and generating reports
Focused on user-friendly UI/UX design
Received positive feedback from users during testing
The slump value for pumpable concrete varies depending on the mix design and application.
Slump value is the measure of the consistency of concrete.
Pumpable concrete typically has a higher slump value than traditional concrete.
The slump value for pumpable concrete can range from 150mm to 200mm.
The mix design and application will determine the appropriate slump value for pumpable concrete.
Slump is measured by placing a slump cone on a flat surface and filling it with concrete. The cone is then lifted and the slump is measured.
Place a slump cone on a flat surface
Fill the cone with concrete in three layers
Compact each layer with a steel rod
Remove the excess concrete from the top of the cone
Lift the cone vertically and measure the slump
Repeat the process for consistency
Tests carried out on aggregates
Sieve analysis to determine particle size distribution
Water absorption test to measure the porosity of aggregates
Aggregate crushing value test to measure the strength of aggregates
Los Angeles abrasion test to measure the resistance to wear and tear
Soundness test to measure the resistance to weathering
Alkali-silica reaction test to determine the potential for harmful chemical reaction
Organ...
Draw the work breakdown structure for a ROOM with foundation
Foundation: excavation, concrete pouring, reinforcement
Walls: framing, insulation, drywall
Roof: framing, sheathing, shingles
Flooring: subfloor, flooring material
Electrical: wiring, outlets, switches
Plumbing: pipes, fixtures
Finishing: painting, trim, hardware
I have used M50 grade of concrete in a construction project.
I have experience in working with high-grade concrete such as M50.
I have knowledge of the properties and characteristics of different grades of concrete.
I have worked on a construction project where M50 grade of concrete was used for the foundation.
I understand the importance of using the right grade of concrete for different types of structures.
SFD and BMD are diagrams used to determine the internal forces and bending moments in a beam.
SFD (Shear Force Diagram) shows the variation of shear force along the length of the beam.
BMD (Bending Moment Diagram) shows the variation of bending moment along the length of the beam.
SFD and BMD are important in designing and analyzing structures.
SFD and BMD can be used to determine the maximum shear force and bending moment...
I am a recent engineering graduate with a passion for problem-solving and innovation.
Graduated with a degree in engineering
Strong problem-solving skills
Passionate about innovation and technology
Completed internships in the engineering field
Involved in extracurricular activities such as robotics club
My hobbies include reading, playing sports, and traveling.
I enjoy reading books on various topics, including fiction, non-fiction, and biographies.
I like to play sports such as basketball, football, and cricket to stay active and healthy.
I love to travel and explore new places, cultures, and cuisines.
I plan to gain experience and knowledge in my field while also pursuing further education.
I want to work for a reputable company in my field
I plan to attend conferences and workshops to stay up-to-date with industry advancements
I am considering pursuing a master's degree in the future
I hope to eventually take on leadership roles within my company or industry
Yes, I am willing to shift anywhere in India for the job.
I am open to exploring new places and cultures.
I understand that being a GET may require me to work in different locations.
I am willing to adapt to new environments and work with diverse teams.
For example, during my internship, I worked in a different city and enjoyed the experience.
I am excited about the opportunity to work with your company and contribute to it
I would take it as a learning experience and try to improve my skills for future opportunities.
I would ask for feedback from the interviewer to understand my shortcomings
I would analyze my performance and identify areas of improvement
I would continue to apply for other opportunities and work on enhancing my skills
I would not let this rejection discourage me and stay positive for future prospects
posted on 19 Feb 2015
posted on 4 Sep 2017
I was interviewed before Sep 2016.
posted on 20 May 2017
I was interviewed in Aug 2016.
posted on 30 May 2017
I am a recent graduate with a degree in Mechanical Engineering, passionate about problem-solving and eager to learn and grow in the field.
Recent graduate with a degree in Mechanical Engineering
Passionate about problem-solving and critical thinking
Eager to learn and grow in the field
Experience with CAD software like AutoCAD and SolidWorks
Passion for designing structures and infrastructure to improve society.
Fascination with architecture and construction
Desire to contribute to the development of society
Interest in solving complex engineering challenges
Inspiration from iconic structures like the Burj Khalifa and Golden Gate Bridge
Bleaching of concrete is the process of removing stains or discoloration from the surface of concrete.
Bleaching agents like hydrogen peroxide or sodium hypochlorite are used to remove stains.
It is commonly used in the restoration of old concrete structures.
Bleaching should be followed by neutralization and thorough rinsing to prevent damage to the concrete.
It is important to wear protective gear like gloves and goggles
posted on 28 Jun 2017
I was interviewed in Sep 2016.
posted on 31 Jan 2017
I was interviewed in Sep 2016.
I am a highly motivated and enthusiastic individual with a passion for engineering and problem-solving.
I recently graduated with a degree in Mechanical Engineering from XYZ University.
During my time at university, I completed several projects that involved designing and building prototypes, such as a solar-powered car and a wind turbine.
I also gained experience in programming languages such as Python and MATLAB, which ...
posted on 19 Sep 2016
My area of interest is in renewable energy and sustainable development.
Passionate about finding innovative solutions to reduce carbon footprint
Interested in exploring alternative energy sources like solar, wind, and hydro power
Believe in the importance of creating a more sustainable future for generations to come
I am interested in joining the IC design team at L&T as it aligns with my passion for semiconductor technology.
I have a strong background in semiconductor physics and design
I have experience working on IC design projects during my academic studies
I am excited about the opportunity to work on cutting-edge technology at L&T
The procedure for form work removal on site involves several steps to ensure safety and quality of the structure.
Inspect the concrete for strength and stability
Remove the formwork in a systematic manner to avoid damage to the concrete
Ensure that the removal process does not cause any stress or strain on the structure
Dispose of the formwork material properly
Clean and prepare the area for the next phase of construction
Nominal mix is a rough estimate of proportions of materials while design mix is a precise calculation of proportions.
Nominal mix is used for small construction projects while design mix is used for large projects.
Nominal mix is not very accurate while design mix is highly accurate.
Nominal mix is expressed in volume while design mix is expressed in weight.
Nominal mix is cheaper than design mix.
Example of nominal mix: 1:...
If the transit mixer is delayed in reaching the site before the i.s.t. of cement, I would take the following actions.
Contact the transit mixer driver to inquire about the delay and estimated time of arrival.
Inform the site supervisor and project manager about the delay.
Evaluate the impact of the delay on the construction schedule and adjust accordingly.
Consider alternative options such as sourcing cement from a nearby ...
One-way slabs are supported on two opposite sides, while two-way slabs are supported on all four sides.
One-way slabs are designed to transfer the load in one direction only, typically along the shorter span.
Two-way slabs are designed to transfer the load in both directions, along both the shorter and longer spans.
One-way slabs are more economical for smaller spans and lighter loads.
Two-way slabs are more suitable for l...
A green building is a structure that is designed and built to have a minimal negative impact on the environment.
Green buildings use sustainable materials and construction techniques.
They are energy-efficient and reduce water consumption.
They incorporate renewable energy sources like solar panels.
Green buildings prioritize indoor air quality and occupant health.
Examples of green building certifications include LEED and
Designing the mix on site is required to ensure the optimal composition of materials for construction projects.
Designing the mix on site allows for customization based on specific project requirements.
It ensures the use of locally available materials, reducing transportation costs.
On-site mix design allows for adjustments based on environmental conditions and project constraints.
It helps in achieving the desired streng...
Common tests performed on concrete and cement
Compressive strength test
Water absorption test
Setting time test
Soundness test
Fineness test
Chemical analysis test
The workability of concrete on site can be measured using various methods.
Slump test: Measures the consistency and flowability of concrete.
Compaction factor test: Determines the workability by measuring the degree of compaction achieved.
Flow table test: Measures the flowability of concrete by determining the diameter of the spread.
Vebe test: Measures the time taken for a standard vibrating needle to penetrate the concr...
I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.
Graduated with a Bachelor's degree in Mechanical Engineering
Completed internships at XYZ Company and ABC Company
Proficient in CAD software such as SolidWorks
Strong problem-solving skills demonstrated through projects like designing a new cooling system for a car engine
I secured a rank of 5000 in JEE Mains.
Secured rank of 5000 in JEE Mains
Scored well in Physics, Chemistry, and Mathematics
Prepared diligently with consistent practice
I chose civil engineering because of my passion for designing and constructing structures that improve people's lives.
I have always been fascinated by architecture and construction
I enjoy problem-solving and working on projects that have a tangible impact on society
I appreciate the blend of creativity and technical skills required in civil engineering
I believe civil engineering offers a wide range of career opportuniti
I want to join L&T because of their reputation for innovation, strong leadership, and opportunities for growth.
L&T is known for its innovative projects and cutting-edge technology
I admire the strong leadership and values of L&T
I see great opportunities for career growth and development at L&T
I am interested in working in the field of integrated circuits (ICs) related to telecommunications.
I have a strong background in telecommunications engineering and have a passion for working with ICs in this field.
I believe that working in IC design for telecommunications will allow me to contribute to the advancement of communication technology.
I am particularly interested in working with RFICs (Radio Frequency Integr...
I will focus on learning and excelling in the new role, while also exploring opportunities to work with my favorite IC in the future.
Stay positive and open-minded about the new opportunity
Focus on learning and excelling in the new role
Explore opportunities to work with favorite IC in the future
I come from a close-knit family of five, including my parents, older sister, and younger brother.
My parents have always been supportive of my education and career goals.
My older sister is a doctor and has been a role model for me in pursuing higher education.
My younger brother is currently studying engineering, following in my footsteps.
We enjoy spending quality time together on weekends, whether it's going for family
I was actively involved in organizing cultural events, participating in sports competitions, and volunteering for social causes.
Organized cultural events such as college fests and talent shows
Participated in sports competitions like inter-college tournaments
Volunteered for social causes like blood donation drives and charity events
My college experience was filled with academic challenges, personal growth, and unforgettable memories.
Participated in various extracurricular activities such as sports, cultural events, and volunteering
Developed strong relationships with classmates and professors
Completed challenging projects and assignments that helped me enhance my skills
Attended workshops and seminars to broaden my knowledge in my field of study
I am a dedicated, hardworking, and detail-oriented individual with strong problem-solving skills.
Dedicated - I always strive to give my best effort in everything I do
Hardworking - I am willing to put in the extra time and effort to achieve my goals
Detail-oriented - I pay attention to the small details to ensure accuracy and quality
Strong problem-solving skills - I am able to analyze situations and come up with effectiv
I am passionate about creating structures that improve people's lives and communities.
Passion for designing and building structures
Desire to contribute to infrastructure development
Interest in problem-solving and project management
Excitement for working in a dynamic and challenging environment
The company is a leading engineering firm specializing in renewable energy solutions.
Specializes in renewable energy solutions
Has a strong focus on sustainability
Offers engineering services for various industries
Known for innovative and cutting-edge technology
Has a global presence with projects in multiple countries
I am a dedicated and hardworking individual with a strong technical background and a passion for learning and growing in the engineering field.
I have a solid educational background in engineering with relevant internships and projects.
I possess strong problem-solving skills and the ability to work well in a team.
I am highly motivated and eager to contribute to the company's success.
I have a proven track record of meeti...
posted on 28 Jan 2017
I was interviewed before Jan 2016.
Concrete mix is a combination of cement, water, aggregates, and sometimes additives used to create a strong and durable building material.
Concrete mix is made up of cement, water, and aggregates (such as sand, gravel, or crushed stone).
The ratio of these ingredients can vary depending on the desired strength and consistency of the concrete.
Additives such as fly ash or silica fume may be added to improve the properties ...
M-35 grade of concrete is a high strength concrete mix used in construction.
M-35 grade of concrete has a compressive strength of 35 N/mm² after 28 days of curing.
It is commonly used in the construction of high-rise buildings, bridges, and heavy-duty industrial structures.
The mix design for M-35 grade of concrete includes a higher proportion of cement, fine aggregates, and coarse aggregates.
The water-cement ratio for M-...
Designing an earthquake-resistant building involves several key factors.
Site selection and soil analysis
Structural design with reinforced concrete and steel
Proper foundation and anchorage
Seismic dampers and shock absorbers
Regular maintenance and inspection
Compliance with local building codes and regulations
End bearing pile supports the load by resting on a hard layer of soil or rock while friction pile supports the load by the frictional resistance between the pile surface and the soil.
End bearing pile transfers the load to a hard layer of soil or rock at the bottom of the pile.
Friction pile transfers the load to the surrounding soil through the frictional resistance between the pile surface and the soil.
End bearing pile...
1 way slab is supported on two opposite sides while 2 way slab is supported on all four sides. Cannot determine slab type without more information.
1 way slab is economical for smaller spans and lighter loads
2 way slab is suitable for larger spans and heavier loads
Slab type depends on the room dimensions and load requirements
Safety Officer
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Site Engineer
12
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Engineer
9
salaries
| ₹0 L/yr - ₹0 L/yr |
Billing Engineer
8
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Sobha
Prestige Group
Godrej Properties
Larsen & Toubro Limited