C&S Electric Senior Design Engineer Interview Questions and Answers

Q1. What is oracle database and uses
Add your answer
Q2. What is memory and storage
Add your answer

Q1. Technical and HR related questions please 🙏🥺
Add your answer
Q2. Technical and HR related questions please
Add your answer

Technical questions around 30 questions.

Q1. Interview with Manager.
Add your answer
Q2. Catia Software related questions
Add your answer

Q1. Basic questions regarding job and work life.
Add your answer

Q1. Plastic shrinkage?
Add your answer
Q2. How many types of plastic material category?
Ans. 
There are seven main categories of plastic materials.
• Thermoplastics

• Thermosets

• Elastomers

• Composites

• Biodegradable plastics

• Engineering plastics

• High-performance plastics
Answered by AI
Add your answer
Q3. Plastic rib thickness standard?
Ans. 
Plastic rib thickness standard varies depending on the application and material used.
• Plastic rib thickness is typically between 0.5mm to 5mm.

• Thicker ribs provide more strength but may increase material usage and cost.

• Thinner ribs are more cost-effective but may be prone to warping or breaking.

• Consider the material properties and intended use when determining rib thickness.

• Consult industry standards and guidelines for s
Answered by AI
Add your answer
Q4. How many types of defects in plastic?
Ans. 
There are three main types of defects in plastic: surface defects, physical defects, and chemical defects.
• Surface defects include scratches, sink marks, and flow marks.

• Physical defects include bubbles, voids, and warping.

• Chemical defects include discoloration, degradation, and contamination.
Answered by AI
Add your answer

Q1. Diff b/w hot runner & cold runner?
Add your answer
Q2. How to prevent plastic defects?
Ans. 
Preventing plastic defects involves proper material selection, design optimization, and quality control measures.
• Selecting the right type of plastic for the application

• Optimizing the design to minimize stress concentrations

• Implementing proper molding techniques and parameters

• Conducting thorough quality control inspections

• Training staff on proper handling and storage of plastic materials
Answered by AI
Add your answer
Q3. No. of tonnage molding machine you are used?
Ans. 
I have experience working with various tonnage molding machines, including 50-ton, 100-ton, and 200-ton machines.
• 50-ton molding machine

• 100-ton molding machine

• 200-ton molding machine
Answered by AI
Add your answer
Q4. What is draft angle in plastic?
Ans. 
Draft angle in plastic is the degree of taper or slope applied to the vertical walls of a plastic part to facilitate its ejection from the mold.
• Draft angles are typically recommended to be between 1-3 degrees for most plastic parts

• Draft angles help prevent the part from getting stuck in the mold during ejection

• Examples of draft angles include adding a slight taper to the sides of a plastic cup or the walls of a plastic
Answered by AI
Add your answer
Q5. What is parametric modelling?
Ans. 
Parametric modelling is a design approach where the model is defined by a set of parameters and rules that govern its shape and size.
• Uses parameters to define the shape and size of the model

• Allows for easy modification of the design by changing parameters

• Enables creation of complex designs with interconnected features

• Commonly used in CAD software like SolidWorks and Autodesk Inventor
Answered by AI
Add your answer
Q6. How to solve plastic defects issue in plastic?
Ans. 
Plastic defects can be solved by identifying root causes, adjusting processing parameters, using quality materials, and implementing proper maintenance.
• Identify root causes of defects such as improper molding conditions or poor material quality

• Adjust processing parameters like temperature, pressure, and cooling rate to optimize production

• Use high-quality materials to ensure consistency and durability of the final produ...read more
Answered by AI
Add your answer
Q7. Cad test on NX Software 2306 version? Plastic parts devlop in cad softwares?
Ans. 
Yes, CAD tests can be conducted on NX Software 2306 version. Plastic parts can be developed in CAD software.
• CAD tests can be performed on NX Software 2306 version to ensure compatibility and functionality.

• CAD software allows for the design and development of plastic parts with precision and accuracy.

• Features like 3D modeling, simulation, and analysis tools in CAD software aid in the development of plastic parts.

• Example...read more
Answered by AI
View 2 more answers

Quantitative and qualitative reasoning, electrical and electronics basics

Q1. Projects based , basic electronics concepts
Add your answer
Q2. Embedded projects related questions
Add your answer

Q1. Plastic defects?
Add your answer
Q2. What is molding?
Ans. 
Molding is a manufacturing process where a liquid or pliable material is poured into a mold to create a specific shape.
• Molding involves heating a material until it becomes pliable, then shaping it using a mold.

• Common types of molding include injection molding, blow molding, and compression molding.

• Examples of molded products include plastic bottles, car parts, and toys.
Answered by AI
Add your answer
Q3. Plastic prevention?
Add your answer
Q4. How to devloped plastic parts? what method are used?
Ans. 
Plastic parts are developed using methods like injection molding, blow molding, and thermoforming.
• Injection molding is a common method where molten plastic is injected into a mold.

• Blow molding is used for hollow parts like bottles, where plastic is blown into a mold.

• Thermoforming involves heating a plastic sheet and shaping it over a mold.

• Other methods include rotational molding, extrusion, and compression molding.
Answered by AI
Add your answer
Q5. What is shrinkage in plastic?
Ans. 
Shrinkage in plastic refers to the reduction in size of a plastic part after it has been molded.
• Shrinkage occurs as the plastic cools and solidifies after being injected into a mold.

• It is important to account for shrinkage when designing molds and parts to ensure proper dimensions.

• Factors affecting shrinkage include material type, mold temperature, cooling rate, and part geometry.

• Common methods to compensate for shrink...read more
Answered by AI
Add your answer

Q1. What is work of npd in industry?
Ans. 
NPD in industry refers to New Product Development, which involves the process of designing, creating, and bringing new products to market.
• NPD involves identifying market opportunities and customer needs

• It includes concept development, design, prototyping, testing, and commercialization

• NPD teams often collaborate with various departments such as marketing, engineering, and manufacturing

• Successful NPD can lead to increas...read more
Answered by AI
Add your answer
Q2. How to calculate costing of complete products?
Ans. 
Costing of complete products can be calculated by considering materials, labor, overhead, and profit margin.
• Calculate the cost of materials required for the product

• Estimate the labor costs involved in manufacturing the product

• Factor in overhead costs such as utilities, rent, and equipment depreciation

• Add a profit margin to cover additional expenses and generate profit

• Consider any additional costs such as shipping, pack...read more
Answered by AI
Add your answer
Q3. What is gate & runner in molding? &
Ans. 
Gate & runner in molding are channels through which molten material is injected into the mold cavity.
• Gate is the opening through which molten material enters the mold cavity

• Runner is the channel that connects the gate to the sprue or main injection point

• Proper design of gates and runners is crucial for ensuring even distribution of material and preventing defects

• Examples: Submarine gate, edge gate, hot runner system
Answered by AI
Add your answer
Q4. What is the purpose of gate & runner in molding?
Ans. 
The purpose of gate & runner in molding is to control the flow of molten material into the mold cavity.
• Gate controls the flow of molten material into the mold cavity

• Runner distributes the molten material throughout the mold

• They help in achieving proper filling of the mold and reducing defects like air pockets or incomplete filling

• Different types of gates and runners are used based on the molding process and material be
Answered by AI
Add your answer
Q5. Cad test: NX Software version 12
Add your answer