Upload Button Icon Add office photos

Filter interviews by

Bharat Electronics Design Engineer Interview Questions and Answers

Updated 16 Nov 2020

Bharat Electronics Design Engineer Interview Experiences

1 interview found

Interview Questionnaire 

3 Questions

  • Q1. What is baud rate? How does it affect communication ?
  • Ans. 

    Baud rate is the rate at which data is transmitted over a communication channel.

    • Baud rate is measured in bits per second (bps).

    • Higher baud rates allow for faster data transmission.

    • Baud rate must be set the same on both ends of the communication channel.

    • Incorrect baud rate settings can result in data corruption or loss.

    • Examples of communication channels that use baud rate include UART, SPI, and I2C.

  • Answered by AI
  • Q2. What design Issues you faced in your Masters project ?
  • Q3. How I2C communication protocol works what things needs to be taken care while designing for I2C peripheral ,pull-up resistors etc
  • Ans. 

    I2C is a serial communication protocol used to connect multiple devices with two wires. Pull-up resistors are necessary for proper communication.

    • I2C uses a master-slave architecture where the master initiates communication.

    • Each device on the bus has a unique address assigned to it.

    • Data is transmitted in packets with a start and stop bit.

    • Pull-up resistors are necessary to ensure proper voltage levels on the bus.

    • The valu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It was a good technical interview one should prepare Fundamental aspects of Electronics design.

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is your achievement?
  • Q2. What problem your faced and how you resolved?
  • Q3. Any rejection by you in previous years and you resolved the rejection issue.
  • Q4. Tell me about your current job profile.

Interview Preparation Tips

Topics to prepare for Vertiv Design Engineer interview:
  • Sheet Metal Design
Interview preparation tips for other job seekers - Do prepare for current job responsibilities.
Friendly advice - don't join vertiv hadapsar Pune.
New employees 5-6 years experienced are only use and through in R&D pune. Means they have tendency that new engineers should work for 2-3 years only. So they don't need to give promotion and good salary hike.
They will create problems to service to New employees.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Apr 2024. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Technical questions regarding your profile and experience
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions as per your current experience and knowledge
Round 3 - HR 

(1 Question)

  • Q1. Small introduction about your experience and salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Best organization... TE connectivity will respect your knowledge and support for career growth

Senior Design Engineer Interview Questions & Answers

Foxconn user image PRASATH GOTHANDAPANI

posted on 25 Oct 2023

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Pneumatic Components, Working principal and application
  • Q2. What are the types of fixtures?
  • Ans. 

    Fixtures are devices used to hold and position workpieces during manufacturing or assembly processes.

    • Jig fixtures are used to guide and control the movement of tools or workpieces.

    • Clamp fixtures are used to secure workpieces in place during machining or assembly.

    • Vise fixtures are used to hold workpieces firmly in position for milling or drilling operations.

    • Indexing fixtures are used to rotate workpieces to specific ang...

  • Answered by AI
  • Q3. What are all the types of mylar?
  • Ans. 

    Mylar is a type of polyester film used in various applications.

    • Mylar is a brand name for a type of polyester film.

    • It is known for its high tensile strength, durability, and heat resistance.

    • Common types of Mylar include Mylar A, Mylar D, and Mylar M.

    • Mylar A is a transparent film used for packaging, printing, and electrical insulation.

    • Mylar D is a metallized film used for reflective purposes, such as in mirrors or emerge...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. What is your current position and expected ctc
  • Ans. 

    I am currently working as a Senior Design Engineer and my expected CTC is confidential.

    • Currently working as a Senior Design Engineer

    • Expected CTC is confidential

    • Cannot disclose the exact amount

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. DO YOU KNOW HOW TO DESIGN AN ENCLOSURE AND ITS COSTING.
  • Ans. 

    Yes, I have experience in designing enclosures and costing for various projects.

    • I have experience in designing enclosures for electronic devices, machinery, and other products.

    • I am familiar with CAD software for creating 3D models of enclosures.

    • I have knowledge of materials and manufacturing processes to determine the cost of the enclosure.

    • I have worked on projects where cost optimization was a key factor in enclosure ...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Plastic part Design knowledge
  • Q2. Project Execution procedure
  • Ans. 

    The project execution procedure involves planning, organizing, and implementing the steps necessary to complete a product design project.

    • Define project goals and objectives

    • Create a project plan with timelines and milestones

    • Allocate resources and assemble a project team

    • Break down the project into smaller tasks

    • Assign tasks to team members

    • Monitor progress and make adjustments as needed

    • Test and evaluate the product design

    • M...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Depth on types of plastic parts, Part Validation knowledge
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is your achievement?
  • Q2. What problem your faced and how you resolved?
  • Q3. Any rejection by you in previous years and you resolved the rejection issue.
  • Q4. Tell me about your current job profile.

Interview Preparation Tips

Topics to prepare for Vertiv Design Engineer interview:
  • Sheet Metal Design
Interview preparation tips for other job seekers - Do prepare for current job responsibilities.
Friendly advice - don't join vertiv hadapsar Pune.
New employees 5-6 years experienced are only use and through in R&D pune. Means they have tendency that new engineers should work for 2-3 years only. So they don't need to give promotion and good salary hike.
They will create problems to service to New employees.

I applied via Referral and was interviewed before Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Salary expectations Experience level Intrested in organization or not.
  • Ans. 

    I am open to discussing salary expectations based on my experience level and the organization's compensation structure.

    • I am open to negotiation and discussing salary expectations.

    • My salary expectations are flexible and dependent on factors such as my experience level and the organization's compensation structure.

    • I am interested in understanding the organization's compensation package and benefits before discussing spec

  • Answered by AI
Round 3 - Technical 

(2 Questions)

  • Q1. Sheet metal process Certain sheet metal operation standards DFMEA process GD&T symbols and there readings Rest what ever is mentioned in resume will be asked from it.
  • Q2. Steps of DFMEA Reason for DFMEA When it done at what level
  • Ans. 

    DFMEA is a process used to identify and mitigate potential failures in a product or process.

    • DFMEA stands for Design Failure Mode and Effects Analysis

    • Steps of DFMEA include identifying potential failure modes, determining the severity of each failure mode, identifying the potential causes of each failure mode, determining the likelihood of occurrence for each cause, determining the ability to detect each cause, and prio...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Vertiv Product Design Engineer interview:
  • DFMEA
  • GD&T
  • Sheet metal operation
  • Wire harness selection criteria
  • DFSS
Interview preparation tips for other job seekers - Keep your keywords simple in resume
Always be ready to be asked what is written in your resume
Try to answer your questions with a relevant example.

Bharat Electronics Interview FAQs

What are the top questions asked in Bharat Electronics Design Engineer interview?

Some of the top questions asked at the Bharat Electronics Design Engineer interview -

  1. How I2C communication protocol works what things needs to be taken care while d...read more
  2. What is baud rate? How does it affect communicatio...read more

Tell us how to improve this page.

Bharat Electronics Design Engineer Salary
based on 104 salaries
₹1.6 L/yr - ₹6 L/yr
11% less than the average Design Engineer Salary in India
View more details

Bharat Electronics Design Engineer Reviews and Ratings

based on 24 reviews

4.8/5

Rating in categories

4.3

Skill development

4.3

Work-Life balance

4.3

Salary & Benefits

4.1

Job Security

4.4

Company culture

3.8

Promotions/Appraisal

4.1

Work Satisfaction

Explore 24 Reviews and Ratings
Project Engineer
1.5k salaries
unlock blur

₹2.7 L/yr - ₹8 L/yr

Engineer Trainee
727 salaries
unlock blur

₹1 L/yr - ₹5.6 L/yr

Deputy Engineer
517 salaries
unlock blur

₹5.9 L/yr - ₹16 L/yr

Graduate Apprentice Trainee
282 salaries
unlock blur

₹0.4 L/yr - ₹5.1 L/yr

Contract Engineer
280 salaries
unlock blur

₹2 L/yr - ₹4.8 L/yr

Explore more salaries
Compare Bharat Electronics with

Hindustan Aeronautics

4.3
Compare

Tata Power

3.9
Compare

Larsen & Toubro Limited

4.0
Compare

BHEL

4.2
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview