Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by ArcelorMittal Nippon Steel Team. If you also belong to the team, you can get access from here

ArcelorMittal Nippon Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

ArcelorMittal Nippon Steel Civil Engineer Interview Questions and Answers

Updated 25 May 2024

ArcelorMittal Nippon Steel Civil Engineer Interview Experiences

2 interviews found

Civil Engineer Interview Questions & Answers

user image Irshad Pathan

posted on 25 May 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. They asked about grade of steel, grade of concrete. Also they asked about question regarding foundation engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare all topics from your previous company experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Cement content in M50 Grade of concrete
  • Ans. 

    The cement content in M50 Grade of concrete is typically around 400 kg/m3.

    • Cement content in M50 Grade of concrete is usually around 400 kg/m3

    • The exact cement content may vary based on specific project requirements and mix design

    • Higher cement content can lead to higher strength but may also increase the risk of cracking

    • Proper testing and quality control measures should be in place to ensure the desired strength and dura

  • Answered by AI

Civil Engineer Interview Questions Asked at Other Companies

Q1. What is the curing formalities for our precast segment???
Q2. What is the lap length of steel in tension zone & compression ... read more
asked in BHEL
Q3. 1)What is the difference of contraction joint & expansion joi ... read more
asked in Lodha Group
Q4. Describe in general, the various stages in construction of reside ... read more
Q5. What is workability of concrete ?

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Referred the resume ofter interview condut
Tips: Selection partcler candidate experience

Round: Technical + HR Interview
Experience: Interview for technical knowledge of work
Tips: Technical questions asking

Skills: Knowledge Of MS Office

I applied via Referral and was interviewed before Jan 2019. There were 6 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. Say something about urself
  • Q2. Work experience
  • Q3. Technical with hr and the concerned department head asked various question
  • Q4. Hr round
  • Q5. Salary negotiations
  • Q6. 3.6 salary I was offered in the year 2010
  • Q7. Excepted

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared technically

Interview Questionnaire 

1 Question

  • Q1. What is ph
  • Ans. 

    pH is a measure of the acidity or basicity of a solution.

    • pH stands for 'potential of hydrogen'

    • It is measured on a scale of 0-14

    • A pH of 7 is neutral, below 7 is acidic, and above 7 is basic

    • pH is important in many fields including chemistry, biology, and environmental science

  • Answered by AI

I applied via Approached by Company and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. All about area related work
Round 3 - HR 

(1 Question)

  • Q1. Package finalizing and house allotment process

Interview Preparation Tips

Interview preparation tips for other job seekers - Good to go for freshers, its most trusted brand in steel making, but work hours may vary depending on your area of working

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Operations, maintenance, project related questions asks
  • Q2. Plant production related products and services quality related questions ask.

Interview Preparation Tips

Interview preparation tips for other job seekers - Plant post of Asst.manager mechanical maintenance work and operations, project management and team management services work related asked.
Interview experience
3
Average
Difficulty level
-
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Aug 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Working principle of ngr
  • Ans. 

    NGR (Next Generation Routing) is a networking technology that dynamically routes traffic based on real-time network conditions.

    • NGR uses machine learning algorithms to analyze network data and make routing decisions.

    • It can optimize traffic flow by selecting the best path based on factors like latency, bandwidth, and congestion.

    • NGR can adapt to changing network conditions in real-time, improving performance and reliabili...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Working principle of Ngr
  • Ans. 

    Ngr stands for Next Generation Routing. It is a routing protocol used in networking to determine the best path for data packets to travel.

    • Ngr uses advanced algorithms to calculate the most efficient route for data packets.

    • It takes into account factors such as network congestion, latency, and available bandwidth.

    • Ngr helps in optimizing network performance and reducing packet loss.

    • Examples of Ngr protocols include OSPF (...

  • Answered by AI

I was interviewed before Jan 2021.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 3 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 4 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 5 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Any questions hr team
  • Ans. My contact no not any time network area ple msg me
  • Answered Anonymously
Round 6 - Case Study 

Diploma

Round 7 - HR 

(1 Question)

  • Q1. What are your salary expectations?
Round 8 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 9 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 10 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be honest with your years of experience. All information you share will be verified at the time of joining.
View all tips
Round 11 - Resume Shortlist 
Pro Tip by AmbitionBox:
Avoid using too much corporate jargon in your CV. Sometimes keeping things simple will get your job done.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - I am civil engginer my experience hydro, irrigation tunnel, rvnl tunnel

I applied via Recruitment Consulltant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Physical and chemical quality of raw materials and sinter product.
  • Ans. 

    Physical and chemical quality of raw materials and sinter product is crucial for ensuring product quality and performance.

    • Raw materials should meet specified physical and chemical requirements to ensure desired sinter product properties.

    • Regular testing and analysis of raw materials and sinter product is necessary to maintain quality standards.

    • Factors such as particle size, composition, moisture content, and impurities ...

  • Answered by AI

ArcelorMittal Nippon Steel Interview FAQs

How many rounds are there in ArcelorMittal Nippon Steel Civil Engineer interview?
ArcelorMittal Nippon Steel interview process usually has 1 rounds. The most common rounds in the ArcelorMittal Nippon Steel interview process are Technical.
How to prepare for ArcelorMittal Nippon Steel Civil Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at ArcelorMittal Nippon Steel. The most common topics and skills that interviewers at ArcelorMittal Nippon Steel expect are Civil Engineering, Construction Engineering, Industrial Construction and Site Supervision.
What are the top questions asked in ArcelorMittal Nippon Steel Civil Engineer interview?

Some of the top questions asked at the ArcelorMittal Nippon Steel Civil Engineer interview -

  1. Cement content in M50 Grade of concr...read more
  2. They asked about grade of steel, grade of concrete. Also they asked about ques...read more

Tell us how to improve this page.

ArcelorMittal Nippon Steel Civil Engineer Interview Process

based on 3 interviews

Interview experience

4.3
  
Good
View more
ArcelorMittal Nippon Steel Civil Engineer Salary
based on 10 salaries
₹2.4 L/yr - ₹5.9 L/yr
At par with the average Civil Engineer Salary in India
View more details

ArcelorMittal Nippon Steel Civil Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Deputy Manager
719 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
576 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
515 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Field Engineer
373 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
345 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ArcelorMittal Nippon Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview