i
APL Apollo Tubes
Compare
Filter interviews by
APL Apollo Tubes Production Engineer Interview Questions and Answers
APL Apollo Tubes Production Engineer Interview Experiences
2 interviews found
Selected
I applied via campus placement at ABES Institute of Technology, Ghaziabad and was interviewed before Apr 2022. There were 3 interview rounds.
(2 Questions)
- Q1. 1. Least count of different scales like vernier calliper, micrometer etc
- Ans.
The least count of vernier caliper is 0.02 mm and that of micrometer is 0.01 mm.
Least count of vernier caliper is 0.02 mm
Least count of micrometer is 0.01 mm
Least count is the smallest measurement that can be read on the scale
It is important to know the least count for accurate measurements
- Q2. What is metal? Types of metals and there chemical composition.
- Ans.
Metals are elements that have high electrical conductivity, luster, and malleability.
Metals are typically solid at room temperature, except for mercury which is a liquid.
Common types of metals include iron, copper, aluminum, gold, silver, and zinc.
Metals can be classified as ferrous or non-ferrous based on their iron content.
The chemical composition of metals varies depending on the specific element, but they all have ...
(1 Question)
- Q1. Family details, previous experience if any, if fresher than what were the scores of qualifications
Interview Preparation Tips
- Sheet Metal
- Metallurgy
(2 Questions)
- Q1. Introduce your self
- Q2. What is the use of accumulator in tube mill
- Ans.
Accumulator in tube mill is used to store and regulate the flow of strip during continuous production.
Accumulator helps in maintaining a constant speed of the tube mill by storing excess strip during high-speed operation and releasing it during low-speed operation.
It also helps in reducing the number of welds required in the production process by allowing continuous feeding of strip into the mill.
Accumulators can be of...
Top trending discussions
Interview questions from similar companies
Selected
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. Basic Metallurgy related questions
- Q2. If your team member stuck in some un- safety condition what will you do... ?
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Sep 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is stainless steel ?
- Ans.
Stainless steel is a corrosion-resistant alloy made of iron, chromium, nickel, and other elements.
Stainless steel is known for its resistance to corrosion, rust, and staining.
It is commonly used in various industries such as construction, automotive, and food processing.
There are different grades of stainless steel, each with varying levels of corrosion resistance and strength.
Examples of stainless steel applications i...
- Q2. Why annealing we needed?
- Ans.
Annealing is needed to relieve internal stresses, improve ductility, and soften the material for further processing.
Annealing helps to remove internal stresses in the material, making it more ductile and less prone to cracking.
It also helps to soften the material, making it easier to shape or machine.
Annealing can improve the microstructure of the material, leading to better mechanical properties.
Examples of materials ...
Discussed on my jobs profile
Interview Preparation Tips
- Steel making and production plan
Skills evaluated in this interview
Selected
I applied via Campus Placement
Test contains reasoning , maths and few questions related to mechanical engineering
(2 Questions)
- Q1. This is a technical round in which we had interact with the senior officer of related department
- Q2. Iron carbon diagram, material properties, college project, forging process
Production Engineer Interview Questions & Answers
MSP Steel & Power
Adarsh Tiwari
posted on 26 Jun 2024
(2 Questions)
- Q1. Kiln parameters
- Q2. Manage to technical issues
Interview Preparation Tips
Production Engineer Interview Questions & Answers
Steel Authority Of India
Haresh k panchal
posted on 4 Jul 2023
Selected
I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.
(5 Questions)
- Q1. Shaft daimeter 40 mm wy bearings no
- Q2. Ferro silicon melting point wy
- Q3. Which composition is a ci casting
- Ans.
CI casting refers to cast iron casting, which is made from a composition of iron, carbon, and silicon.
CI casting stands for cast iron casting.
It is made from a composition of iron, carbon, and silicon.
The carbon content in CI casting is typically between 2.1% and 4%.
The silicon content in CI casting is typically between 1% and 3%.
CI casting is known for its excellent castability, good machinability, and high wear resis
- Q4. High crome metal pouring temperature
- Ans.
The pouring temperature of high chrome metal is typically between 1,600 to 1,800 degrees Celsius.
High chrome metal is commonly used in applications that require high temperature resistance and corrosion resistance.
The pouring temperature is crucial to ensure proper flow and solidification of the metal.
The specific pouring temperature may vary depending on the exact composition of the high chrome metal and the desired p...
- Q5. Maild steel campotion
Production Engineer Interview Questions & Answers
Kirloskar Ferrous Industries
Anonymous
posted on 27 Sep 2024
Selected
I applied via campus placement at Sandur Polytechnic, Bellary and was interviewed before Sep 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Skills and comunication
- Q2. Time manegement
Route cause analysis
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Feb 2022. There were 3 interview rounds.
General questions from graduation subjects & questions from Quantitative aptitude. Overall paper difficulty was at medium level.
(6 Questions)
- Q1. Introduce yourself. Different types of measuring instruments & their applications, least count.
- Q2. Project details done in graduation last semester.
- Q3. Applications of measuring instruments.
- Ans.
Measuring instruments are used in various applications to accurately measure physical quantities.
Quality control in manufacturing processes
Monitoring and controlling environmental conditions
Testing and calibration of equipment
Research and development
Process optimization and efficiency improvement
Data collection and analysis
Safety and hazard detection
Medical diagnostics and patient monitoring
- Q4. Different types of castings & their uses.
- Ans.
Different types of castings & their uses
Sand casting: used for large and complex shapes like engine blocks
Investment casting: used for intricate and detailed parts like jewelry
Die casting: used for high-volume production of small to medium-sized parts like car components
Centrifugal casting: used for cylindrical shapes like pipes and tubes
Continuous casting: used for producing long and continuous shapes like steel bille
- Q5. Manufacturing processes & their applications.
- Ans.
Manufacturing processes are techniques used to transform raw materials into finished products.
Casting: pouring molten metal into a mold to create a solid object (e.g. automotive engine blocks)
Machining: removing material from a workpiece using cutting tools (e.g. CNC milling)
Forming: shaping materials through deformation (e.g. sheet metal bending)
Joining: combining multiple parts into a single entity (e.g. welding)
Addi...
- Q6. Difference between first and third angle projection in mechanical drawings.
- Ans.
First angle projection and third angle projection are two different methods used in mechanical drawings to represent a 3D object on a 2D plane.
First angle projection is commonly used in Europe and Asia, while third angle projection is commonly used in North America.
In first angle projection, the object is placed in the first quadrant and the views are projected onto the planes surrounding the object.
In third angle proj...
Interview Preparation Tips
- Manufacturing processes
(2 Questions)
- Q1. Star delta starter
- Q2. Dol rdol starter
Interview Preparation Tips
APL Apollo Tubes Interview FAQs
Tell us how to improve this page.
APL Apollo Tubes Interviews By Designations
- APL Apollo Tubes Assistant Manager Interview Questions
- APL Apollo Tubes Production Engineer Interview Questions
- APL Apollo Tubes Accountant Interview Questions
- APL Apollo Tubes Assistant Manager- HR Interview Questions
- APL Apollo Tubes Car Driver Staff Interview Questions
- APL Apollo Tubes CRM Head Interview Questions
- APL Apollo Tubes Deputy Manager Sales & Marketing Interview Questions
- APL Apollo Tubes Design Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Production Supervisor Interview Questions
- Production Manager Interview Questions
- Production Officer Interview Questions
- Executive Production Interview Questions
- Production Interview Questions
- Senior Production Engineer Interview Questions
- Production Chemist Interview Questions
- Production Operator Interview Questions
- Show more
People are getting interviews through
Production Engineer Interview Questions from Similar Companies
Fast track your campus placements
APL Apollo Tubes Production Engineer Reviews and Ratings
based on 8 reviews
Rating in categories
|
Assistant Manager
103
salaries
|  ₹5 L/yr - ₹9.5 L/yr |
|
Senior Executive
72
salaries
| ₹3 L/yr - ₹6.8 L/yr |
|
Production Engineer
53
salaries
| ₹2.3 L/yr - ₹6.5 L/yr |
|
Senior Engineer
47
salaries
| ₹4.1 L/yr - ₹7.5 L/yr |
|
Engineer
44
salaries
| ₹2.4 L/yr - ₹5.4 L/yr |
Tata Steel
Jindal Steel and Power
Steel Authority Of India
JSW Steel
Calculate your in-hand salary
- Home >
- Interviews >
- APL Apollo Tubes Interview Questions >
- APL Apollo Tubes Production Engineer Interview Questions
