Premium Employer

i

This company page is being actively managed by APL Apollo Tubes Team. If you also belong to the team, you can get access from here

APL Apollo Tubes

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

APL Apollo Tubes Production Engineer Interview Questions and Answers

Updated 4 Jun 2024

APL Apollo Tubes Production Engineer Interview Experiences

2 interviews found

Production Engineer Interview Questions & Answers

user image Dhananjay singh

posted on 4 Jun 2024

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Introduce your self
  • Q2. What is the use of accumulator in tube mill
  • Ans. 

    Accumulator in tube mill is used to store and regulate the flow of strip during continuous production.

    • Accumulator helps in maintaining a constant speed of the tube mill by storing excess strip during high-speed operation and releasing it during low-speed operation.

    • It also helps in reducing the number of welds required in the production process by allowing continuous feeding of strip into the mill.

    • Accumulators can be of...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. 1. Least count of different scales like vernier calliper, micrometer etc
  • Ans. 

    The least count of vernier caliper is 0.02 mm and that of micrometer is 0.01 mm.

    • Least count of vernier caliper is 0.02 mm

    • Least count of micrometer is 0.01 mm

    • Least count is the smallest measurement that can be read on the scale

    • It is important to know the least count for accurate measurements

  • Answered by AI
  • Q2. What is metal? Types of metals and there chemical composition.
  • Ans. 

    Metals are elements that have high electrical conductivity, luster, and malleability.

    • Metals are typically solid at room temperature, except for mercury which is a liquid.

    • Common types of metals include iron, copper, aluminum, gold, silver, and zinc.

    • Metals can be classified as ferrous or non-ferrous based on their iron content.

    • The chemical composition of metals varies depending on the specific element, but they all have ...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Family details, previous experience if any, if fresher than what were the scores of qualifications

Interview Preparation Tips

Topics to prepare for APL Apollo Tubes Production Engineer interview:
  • Sheet Metal
  • Metallurgy
Interview preparation tips for other job seekers - Be always prepared about what is the company’s vision and what are the company’s main products. Always try to gain maximum knowledge of that product.

Production Engineer Interview Questions Asked at Other Companies

Q1. How to solve the problem in robot means how to detect fault?
asked in Foxconn
Q2. If product a fails in last stage what is root cause ?
Q3. Minimum value measure by vernier caliper?
Q4. difference between mass production and batch production?
Q5. Did you know about soldering and what is the criteria for solderi ... read more

Interview questions from similar companies

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Recruitment Consultant and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Ash well Ash qualifications according questions asked and experience skill relative questions

Interview Preparation Tips

Interview preparation tips for other job seekers - About your self and discuss your family relative and second round written test and experience skill is available yeh not

Interview Questionnaire 

1 Question

  • Q1. Production planing
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. Shaft daimeter 40 mm wy bearings no
  • Q2. Ferro silicon melting point wy
  • Q3. Which composition is a ci casting
  • Ans. 

    CI casting refers to cast iron casting, which is made from a composition of iron, carbon, and silicon.

    • CI casting stands for cast iron casting.

    • It is made from a composition of iron, carbon, and silicon.

    • The carbon content in CI casting is typically between 2.1% and 4%.

    • The silicon content in CI casting is typically between 1% and 3%.

    • CI casting is known for its excellent castability, good machinability, and high wear resis

  • Answered by AI
  • Q4. High crome metal pouring temperature
  • Ans. 

    The pouring temperature of high chrome metal is typically between 1,600 to 1,800 degrees Celsius.

    • High chrome metal is commonly used in applications that require high temperature resistance and corrosion resistance.

    • The pouring temperature is crucial to ensure proper flow and solidification of the metal.

    • The specific pouring temperature may vary depending on the exact composition of the high chrome metal and the desired p...

  • Answered by AI
  • Q5. Maild steel campotion
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Group Discussion 

More Subsidies to Farmers or a Better Mechanism for Loan - What should Govt. ...
Villages are the Pride of India.
Advanced food processing technologies or Organic Farming?
Are Farm Subsidies Necessary?
Is Agriculture a Fertile Ground for Digitalisation?

Round 3 - Technical 

(7 Questions)

  • Q1. What is motor?and explain working of motor
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to produce motion.

    • Motors can be classified into different types such as DC motors, AC motors, and stepper motors.

    • The basic working principle of a motor involves the interaction of magnetic fields to generate force and motion.

    • In a DC motor, current flows through a coil within a magnetic field, creating a force that rotates the motor shaft.

    • In an A...

  • Answered by AI
  • Q2. Define transformer? Explain types of transformer?
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease voltage levels in electrical circuits.

    • There are two main types of transformers: step-up transformers and step-down transformers.

    • Step-up transformers increase voltage levels, while step-down transformers decrease voltage levels.

    • Other types of transformers...

  • Answered by AI
  • Q3. Different between switch, isolator and circuit breaker?
  • Ans. 

    Switch is used to control the flow of electricity, isolator is used for isolating a circuit, and circuit breaker is used for protecting the circuit from overloads.

    • Switch is used to open or close an electrical circuit, allowing or stopping the flow of electricity.

    • Isolator is used to disconnect a circuit from the power supply for maintenance or repair purposes.

    • Circuit breaker is a device designed to protect an electrical...

  • Answered by AI
  • Q4. What is induction motor?
  • Ans. 

    An induction motor is a type of AC motor where power is supplied to the rotor by electromagnetic induction.

    • Consists of a stator and a rotor

    • Does not require any physical connection between the rotor and the stator

    • Commonly used in industrial applications for driving pumps, compressors, and fans

  • Answered by AI
  • Q5. How many types of motor?
  • Ans. 

    There are two main types of motors: AC motors and DC motors.

    • AC motors: Alternating current motors that are commonly used in household appliances and industrial applications.

    • DC motors: Direct current motors that are often used in battery-operated devices and automotive applications.

  • Answered by AI
  • Q6. Explain difference between switch, isolator and circuit breaker?
  • Ans. 

    Switch is used to make or break an electrical circuit, isolator is used for isolating a circuit for maintenance, and circuit breaker is used for protecting the circuit from overloads and short circuits.

    • Switch is used to manually open or close an electrical circuit.

    • Isolator is used to isolate a circuit for maintenance purposes, ensuring no current flows through it.

    • Circuit breaker is a safety device that automatically in...

  • Answered by AI
  • Q7. Explain how many types of fault?
  • Ans. 

    There are three main types of faults: normal faults, reverse faults, and strike-slip faults.

    • Normal faults occur when the hanging wall drops down relative to the footwall. Example: Basin and Range Province in the western United States.

    • Reverse faults occur when the hanging wall moves up relative to the footwall. Example: Rocky Mountains in North America.

    • Strike-slip faults occur when the blocks slide past each other horiz...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. What to conveyor belt related questions
  • Q2. Why to conveyor line experience in jspl
  • Ans. 

    Conveyor line experience in JSPL is relevant to the Production Engineer role.

    • JSPL has a large-scale conveyor system for transporting raw materials and finished products.

    • Experience with conveyor systems is important for optimizing production efficiency.

    • Knowledge of conveyor maintenance and troubleshooting is also valuable.

    • JSPL's conveyor system includes various types of conveyors such as belt, screw, and bucket conveyor...

  • Answered by AI
  • Q3. This types conveyor maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - I am conveyor belt maintenance working experience in jspl.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Rolling mill hydraulic systems and maintenance
  • Q2. Hydraulic pump and valve maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - good communication for teem and excellent team work for job milegi to
Contribute & help others!
anonymous
You can choose to be anonymous

APL Apollo Tubes Interview FAQs

How many rounds are there in APL Apollo Tubes Production Engineer interview?
APL Apollo Tubes interview process usually has 2 rounds. The most common rounds in the APL Apollo Tubes interview process are HR, Resume Shortlist and One-on-one Round.
What are the top questions asked in APL Apollo Tubes Production Engineer interview?

Some of the top questions asked at the APL Apollo Tubes Production Engineer interview -

  1. What is metal? Types of metals and there chemical compositi...read more
  2. 1. Least count of different scales like vernier calliper, micrometer ...read more
  3. What is the use of accumulator in tube m...read more

Recently Viewed

INTERVIEWS

L.G.Balakrishnan & Bros

No Interviews

INTERVIEWS

L.G.Balakrishnan & Bros

30 top interview questions

INTERVIEWS

Greet Technologies

No Interviews

INTERVIEWS

ABCI Infrastructures

No Interviews

SALARIES

Cedcoss Technologies

SALARIES

Vinove Software & Services

INTERVIEWS

Vinove Software & Services

No Interviews

INTERVIEWS

L.G.Balakrishnan & Bros

No Interviews

INTERVIEWS

Tekion

No Interviews

CAMPUS PLACEMENT

Sandur Polytechnic, Bellary

Tell us how to improve this page.

APL Apollo Tubes Production Engineer Interview Process

based on 3 interviews

Interview experience

4
  
Good
View more
Join APL Apollo Tubes India's No. 1 Structural Steel Tube Company
APL Apollo Tubes Production Engineer Salary
based on 52 salaries
₹2.3 L/yr - ₹6.5 L/yr
At par with the average Production Engineer Salary in India
View more details

APL Apollo Tubes Production Engineer Reviews and Ratings

based on 9 reviews

4.5/5

Rating in categories

4.1

Skill development

3.7

Work-life balance

4.0

Salary

4.1

Job security

4.3

Company culture

3.8

Promotions

4.0

Work satisfaction

Explore 9 Reviews and Ratings
Assistant Manager
113 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
74 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
47 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare APL Apollo Tubes with

Tata Steel

4.1
Compare

Jindal Steel and Power

3.9
Compare

Steel Authority Of India

4.1
Compare

JSW Steel

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent