Upload Button Icon Add office photos

Aker Solutions

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Aker Solutions Structural Engineer Interview Questions and Answers

Updated 4 Aug 2024

Aker Solutions Structural Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is difference between static and dynamic analysis
  • Ans. 

    Static analysis deals with loads that do not change over time, while dynamic analysis considers loads that vary with time.

    • Static analysis is used to determine the effects of loads that do not change over time, such as dead loads and live loads.

    • Dynamic analysis considers loads that vary with time, such as wind loads, seismic loads, and vibrations.

    • Static analysis is simpler and less computationally intensive compared to ...

  • Answered by AI
  • Q2. How to perform spectral fatigue analysis
  • Ans. 

    Spectral fatigue analysis is performed by calculating the stress response of a structure to dynamic loads over a range of frequencies.

    • Determine the dynamic loads acting on the structure

    • Calculate the stress response of the structure using spectral methods

    • Analyze the stress response at different frequencies to assess fatigue damage

    • Consider factors such as material properties, load history, and environmental conditions

    • Use...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How do you tackle in case of conflict of interest
  • Ans. 

    I prioritize transparency, disclose the conflict, and recuse myself if necessary.

    • Prioritize transparency and disclose the conflict to all parties involved

    • Evaluate the situation and determine if recusal is necessary

    • Seek guidance from a supervisor or ethics committee if unsure how to proceed

  • Answered by AI
  • Q2. What is your notice period
  • Ans. 

    My notice period is currently one month.

    • Notice period is one month

    • I am required to give one month notice before leaving my current position

    • I can start a new position after one month

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for your last project done. Codes and standards used

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Which column takes more load short or Long Column
  • Q2. What kind of pressures will impose on the water tank walls during seismic

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with fundamentals

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. The HR round was very pathetic. Sreethala took my HR round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please don't waste your precious time in giving the interview for Baker Hughes, Powai
Mumbai location. They will take all the interview rounds. The HR will ask you to submit all documents and last moment they will cancel your candidature without giving you any specific reason.

I applied via Naukri.com and was interviewed before Nov 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Basics related to piperack design
  • Q2. Design parameters for steel structure
  • Ans. 

    Design parameters for steel structure

    • Load capacity and distribution

    • Material strength and durability

    • Environmental factors such as wind and seismic activity

    • Connection details and joint design

    • Fire resistance and protection measures

  • Answered by AI
  • Q3. Number of years exposure to staad
  • Ans. 

    I have 5 years of exposure to STAAD software.

    • I have used STAAD for various structural analysis and design projects.

    • I am proficient in using STAAD for modeling, analysis, and design of steel and concrete structures.

    • I have experience in using STAAD for seismic analysis and design of structures.

    • I have also used STAAD for foundation design and analysis.

    • I keep myself updated with the latest versions and features of STAAD so

  • Answered by AI
  • Q4. Grating design and deflection limits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive & confident
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I was interviewed in Apr 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Control Valve sizing
  • Q2. Flowmeter selection
Round 2 - HR 

(2 Questions)

  • Q1. Reason for shifting
  • Ans. 

    I shifted to pursue new opportunities for growth and development in my career.

    • Seeking new challenges and responsibilities

    • Exploring different industries or technologies

    • Relocation for personal reasons or family commitments

  • Answered by AI
  • Q2. Expected salary
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Most interview question based on resume only. And related oil and gas industry.
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Topics to prepare for TechnipFMC Senior Engineer interview:
  • API 6A
  • Subsea
  • Pressure Handling
Interview preparation tips for other job seekers - Go with confidence
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic Geotechnical questions
  • Q2. Piling Design, Shallow Foundation Design, International Codes for subsea structure foundation designs.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Design knowledge should be must.

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed before Jun 2021.

Round 1 - Technical 

(2 Questions)

  • Q1. Input output list the digital and analog signals from field instruments to control room via the single core and multicore cables via the junction boxes.
  • Q2. What is dca an# plc
  • Ans. 

    DCA and PLC are commonly used acronyms in the field of engineering.

    • DCA stands for Direct Current Amplifier, which is a device used to amplify direct current signals.

    • PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.

    • DCA and PLC are essential components in various engineering applications such as industrial automation and control systems.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn hard and work hard

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Based on the experiences and technical information provided in resume
  • Q2. Based on the standards mentioned in resume regarding oil and gas

Interview Preparation Tips

Interview preparation tips for other job seekers - Technipfmc is a one of good company to join , it will be tough for one who is good at work.
Contribute & help others!
anonymous
You can choose to be anonymous

Aker Solutions Interview FAQs

How many rounds are there in Aker Solutions Structural Engineer interview?
Aker Solutions interview process usually has 2 rounds. The most common rounds in the Aker Solutions interview process are Technical and HR.
What are the top questions asked in Aker Solutions Structural Engineer interview?

Some of the top questions asked at the Aker Solutions Structural Engineer interview -

  1. What is difference between static and dynamic analy...read more
  2. How to perform spectral fatigue analy...read more

Recently Viewed

INTERVIEWS

Schneider Electric

200 top interview questions

INTERVIEWS

Aker Solutions

No Interviews

INTERVIEWS

Altair Engineering

No Interviews

INTERVIEWS

Schneider Electric

No Interviews

INTERVIEWS

Aker Solutions

No Interviews

INTERVIEWS

Aker Solutions

No Interviews

INTERVIEWS

Aker Solutions

No Interviews

INTERVIEWS

Aker Solutions

No Interviews

SALARIES

FinIQ Consulting

INTERVIEWS

Adobe Metal Products

No Interviews

Tell us how to improve this page.

Aker Solutions Structural Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Aker Solutions Structural Engineer Salary
based on 19 salaries
₹4 L/yr - ₹13.1 L/yr
57% more than the average Structural Engineer Salary in India
View more details

Aker Solutions Structural Engineer Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

3.3

Skill development

5.0

Work-life balance

5.0

Salary

2.7

Job security

4.3

Company culture

4.0

Promotions

4.6

Work satisfaction

Explore 2 Reviews and Ratings
Design Engineer
214 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
147 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
94 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
63 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Buyer
51 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aker Solutions with

TechnipFMC

4.0
Compare

McDermott International

4.3
Compare

Saipem

4.1
Compare

Subsea 7

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview